Name: 500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
Brand: EPYTEC
SKU: BF307
Price: 37.3 EUR
Availability: InStock
Rating: 5.0 (9 reviews)

VW Golf MK7 AUDI A3 Brake Caliper Adapter Brake System 380x38 Brake Disc Audi R8 6-piston Caliper

Brake caliper adapter on Golf MK7 Audi A3 and many more model for conversion to 6-piston brake calipers from R8, combined with the Audi R8 ceramic brake discs 380x38mm. Suitable for following vehicles: Audi A3 Audi A3 Cabriolet Audi Q2 VW Arteon VW Golf Sportsvan VW Golf VII VW Golf VII Variant VW Passat Variant VW Tiguan VW Touran Seat Ateca Seat Leon Seat Leon ST Skoda Octavia III Skoda Octavia III Combi Skoda Superb III Skoda Superb Kombi III Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi R8 6-piston , reference left 420615107A / right 420615108A brake disc: ceramic Audi R8 380x38mm, reference 420.615.301K Delivery: 2x brake caliper adapters for VW Golf MK7 Audi A3 and many more 2x centric rings for VW Golf MK4 Audi S3 A3 Cupra R and may other models material certificate

€207.03*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Porsche Panamera Bremsanlage Bremssattel Adapter 390x36 Tuning Adapter

Bremssattel Adapter für die Golf 7 8 Audi A3 8V Baureihe auf die Porsche Panamera Bremssättel in Verbindung mit den Mercedes ML 63 Bremsscheiben 390x36. Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel)Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör. Vorteile dieser Bremsanlage: Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage Bremsscheiben sind sehr günstig in der Anschaffung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Porsche Cayenne 958 GTS Panamera Bremssättel Teilenummer: 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 20.A221.03 (Schaftlänge vom Bremssattel muss 87mm sein, siehe gelbe Markierung auf dem letzten Bild) Bremsscheiben vom Mercedes Benz GL - Klasse 390x36mm Teilenummer: 166 421 0512 Die Bremsbeläge müssen an der oberen Kante bearbeitet werden, da diese sonst überstehen würden Lieferumfang: 2x Bremssattel Adapter 2x passende Zenrierringe passendes hochfestes Schraubenmaterial Materialzertifikat

€215.38*

Golf MK1 Caddy Brake Caliper Adapter G60 S2 Adapter Brake System

Brake caliper adapter, front axle, for Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco to convert to 280 mm brake system from the following models: Golf 2 G60 (incl. Syncro) Passat G60 (incl. Syncro) Corrado G60 Combined with the Girling or Lucas 54 Sätteln und 280 mm brake discs. NEW: delivered in black color. Our caliper adapters are manufactured with a special method against corrosion, which guarantees best rust protection and abrasion resistance Advantages of this brake system: no more fading with G60 brake system .high deceleration, also in conjunction with our rear axle braking systemthanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesdirectly fit to the above-mentioned models and therefore can always be restored to the original state without any problemsOur EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Tip: If you don't have the brake caliper carrier and brake calipers yet, we have the perfect solution for you here article APA274 (click here).The brake caliper carriers were developed in such a way that you no longer have to install an adapter to install the G60 system on your vehicle.You can mount the brake calipers and brake caliper brackets directly on your vehicle. What is the difference between item number 216 and 142' The hole dimensions of the two tuning adapters are identical. We recommend always to install the article 216, because it is more stable. The tuning adapter 142 we have developed for the VW Polo axle, since this is slightly different in shape and the tuning adapter 216 can not be installed. Delivery: 2x brake caliper adapters, black, galvanized (high-strength steel) 4x srews (10.9) Installation instructions with detailed picture material copy of vehicle document to simplify the registration material certificate

€105.69*

Audi S4 RS4 Passat W8 4motion Quattro Rear axle Brake disc system Brake caliper adapter 335x22

Brake caliper adapter for original brake calipers in conjunction with the large, internally ventilated 335x22mm brake disc from the Audi A8. Suitable for all VW/Audi with original rear axle brake discs in the size 256x22. Exact fit for the following vehicles: Audi A4 S4 RS4 (8D2, B5 ) Quattro (RS4 only fit facelift with 256x22 ventilated brake discs original rear if the 312x22 brake disc is installed original then di brake caliper carrier from the smaller brake in 256x22 are needed). VW Passat ( 3B2 3B3 3B5 3B6 ) 4motion / Syncro Required components: Brake discs from the A8 / 335x22mm OE number VAG: 4E0 615 601 L(ATE Nr: 24.0122-0214.1 ) Advantages of this brake system: Best possible deceleration values and performance! Indispensable also for performance upgrades Components come from series production of VW/Audi Very inexpensive brake disc procurement Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series vehicles. With this brake should be driven at least 19 inch rims. Do not fit without modifications with the RS4 wheels! Hiweiß: It may happen from time to time that the caliper bracket because of its Gus Tolerantzen is not mashaltig and must be processed. Scope of delivery: 2x Brake caliper adapter completely galvanized (see picture) 4x high-strength screw M10x1,25x25 Material certificate Installation instructions

€134.60*

VW Golf Scirocco Corrado G60 VR6 16V Brake Caliper Adapter Porsche Rear Axle 280x20

Brake caliper adapter, rear axle, on various VW and Seat models, for conversion to rear brake caliper from Porsche 996, combined with the front brake discs VR6 280mm . Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item No 313 in our shop) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The brake caliper adapter are mounted between the axle beam and the axle stub. The necessary screws are supplied. With our hub spacers ( not supplied in this kit , and available with 4 or 5 holes according to the model) , the 280 mm brake discs are centered and screwed (in our shop you will find the complete kit). The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we propose brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 2x special wheel hubs with which the VR6 disk can be exactly mounted depending on the model, the 4 or 5 hole wheel hubs are available. With 4 holes, the brake discs have to be modified. (click here) brake disc: VR6 , VAG reference : 357698151C Delivery: 2x brake caliper adapters high strength mounting screws material certificate This kit is only for the circuit since there is no cable handbrake.We have the same kit also with handbrake function under the item No 678 in the shop.

€268.21*

BMW E36 M3 Performance Brake Caliper Adapter Front Brake System 345x28

Brake caliper adapters for the front axle of BMW E36 M3 to install the 6 piston BMW Performance brake calipers, combined with the 345x28mm E46 M3 brake discs. Thanks to our adapter, the 6 piston BMW Performance brake calipers are simply screwed to the original axle instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW Performance 6 piston from 135i , reference: left 34116786741 ; right 3411678674 Brake pads from the BMW 135i Part No. 34 11 6 786 044 bracke disc: BMW E46 M3 CSL front axle 345x28mm Delivery: 2x brake caliper adapters for BMW E36 M3 high strength mounting screws material certificate

€172.12*

VW T3 bus disc brake rear axle conversion adapter brake brake system brake caliper adapter

Disc brake adapter to convert the T3 BUS to brake discs on the rear axle. Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes Very cheap procurement of the components TÜV registration with supplied material certificate possible Quick and easy assembly possible with the supplied screws! The diameter of the wheel hub on rear axle of your vehicle needs to be modified to allow complet installation of our kit.We have a tailor-made one for this kit in our shop article nr. 358 >>Click here and go directly to the wheel hubs<< Required conversion components: Brake discs 268x10 height 45.7 from the VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) (1995) VW NR: 7M0615601 Brake calipers Girling 38 OE NR: 191615423 Matching brake caliper holder OE NR: 1H0615426 Brake pads OE NR: 1H0698451F VW Golf 3 4 G60 VR6 etc. Longer wheel studs for the rear wheel hub. Handbrake cable from VW Golf 2 and Jetta OE NR: 191609721D Length: 1840/1220mm Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. Scope of delivery: 2 high resistant adapter-plates Set of matching centering rings Complete set of high resistant srews Directions for use for correct installation Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities).

€194.25*

VW Golf MK4 VW Polo 6r WRC Audi A3 TT R32 S3 Brake Caliper Adapter Brake System

Brake caliper adapter inorder to install thelarge rear brake system (256x22) from Golf Mk4 V6 4Motion R32 , VW Polo 6R WRC, Audi TT 8N, S3 into all front-wheel-drive vehicles ef the series Golf 4 TT A3. Adapters are made of high-strength steel and are supplied galvanized.The adapter has a thickness of 6mm and a hole spacing of 90mm. Advantages of this brake system: top deceleration, without comparison with conventional brake discs, rear better performance supplied material certificate the brake calipers from the 4Motion models can be fitted with our brackets. Thus, you avoid the purchase of Jubi caliper supports costing around 120 €, and which are difficult to find. Required components: brake caliper: VW Golf R32 V6 or S3 brake caliper left VW reference 8N0615423C, brake caliper right VW referecne 8N0615424C brake caliper mounting braket: reference 8N0615425B brake disc: VW+ Audi 4motion 256x22mm longer fixation screws (also including screws available from us under item no. 683) Delivery: 2x brake caliper adapters material certificate

€24.34*

VW Golf VW Polo 6r WRC 4 Derby Vento Seat Ibiza R32 S3 Brake Caliper Adapter Rear Brake Disc 280x22

Brake caliper adapter for the rear axle on Golf 4 series for conversion to R32 / S3 brake calipers, combined with the 280mm Golf MK4 brake discs. Suitable for the following vehicles ( front wheel drive): Audi A3 8L Audi A1 Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 Polo 6R WRC Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc internally vented ,280x22 VW Golf 4 Audi A3 1,8 1,9TDI , reference: 1JO 615 301 E brake caliper, brake caliper support and brake pads from R32 / S3 Delivery: 2x brake caliper adapters for VW Golf 4, Audi A3 and others high-strength mounting screws (10.9) material certificate

€147.23*

VW Golf MK5 MK6 MK7 Brake Caliper Adapter Brake System 360x32 365x34 Audi TT RS4 B5 B7 R8 8-piston Caliper

Brake caliper adapter on models Golf MK5, MK6 and MK7 for conversion to 8 piston brake caliper from R8, combined with Audi RS6 brake discs (360x32mm). The adapters fit the following vehicles with steel steering knuckles: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III MPV 2CB VW Caddy III Box 2CA VW Golf Plus 521 VW Golf V1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 Suitable for all vehicles listed that have a steel knuckle installed (not suitable for vehicles with aluminum knuckles)It may be that steering angle limiters have to be installed for a complete steering angle, you can find these below in the matching accessories. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi R8 8 piston, left reference: 8E0615107 ; right reference: 8E0615108 brake disc: Audi RS4 B5 360x32 mm reference : 8D0615302B / or RS4 B7 brake disc 365x34mm reference 8E0615301AB (when the 365x24mm disc is installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated. In this case we recommend our Epytec article with the No. 707-BU Delivery: 2x brake caliper adapters for VW Golf MK5, MK6 2x corresponding centric rings high-strength mounting screws Matching washers for the 365 disc material certificate

€221.96*

VW Golf 4 Polo VW Polo 6r WRC 9N Bora Audi A3 TT TTRS RS3 Audi TT brake system brake caliper adapter 334x32

Brake caliper adapter for Golf 4 series to install TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 , PCD 5x100). Suitable for following vehicles : Audi A3 (8L) Audi TT (8N) VW Golf 4 VW Bora VW Beetle VW Polo (9N) Seat Ibiza Seat Leon Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: original TTRS brake caliper reference : left 8J0 615 107 ; right 8J0 615 108 brake pads: reference : 8J0 698 151 E brake disc: Golf 4 R32 334x32 mm , reference : 1J0 615 301AA / 1J0 615 302 A Delivery: 2x brake caliper adapters (see picture) high-strength mounting screws material certificate CAD anylysis for the registration installation tutorial

€205.63*

VW Golf 1 Caddy 14d Jetta Scirocco Brake Caliper Adapter Brake System Golf 4 5 GTI Discs 312x25

Brake caliper adapter, front axle, for the Golf MK1 models to install the caliper of Golf 5 GTI, combined with the disc of Golf 4 GTI 312x25. Suitable for the following vehicles: Golf 1 Golf 1 Cabrio Jetta 1 Caddy 14d Scirocco Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: Golf 5 GTI brake calipers , reference: 1K0.615.123.E + 1K0.615.124.E Brake caliper carrier from the VW Golf 5 GTI. Part number: 1K0 615 125 C Brake pad kit , reference: 5K0.698.151 Golf 4 GTI brake discs , reference: 8N0.615.301.A in connection with our 5x100 wheel hubs (article no .: 46729-5) or the brake discs have to be re-drilled (can also be made in-house) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€106.42*

VW Beetle Caliper Adapter Porsche 944 Floating Caliper Brake Caliper Adapter 282,5x20,5

Brake caliper adapter with special plates including Porsche 5x130 PCD to install floating brake caliper of Porsche 944 onto VW Bettle with drum brake and axle leg (YoC: 1965-1968). Advantages of this brake system: top deceleration, without comparison with conventional brake system Is not authorized under the STVO (German Road Licensing Law) However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles easy assembly. Can be easily returned to original state. No welding, milling and drilling Required components: floating brake caliper from Porsche 944 brake discs from Porsche 944 2,7 l 282,5x20,5mm Porsche reference: 944 351 951 02 wheel bearing from VW Bettle, OE: 311 405 625, 311 405 645 For the wheel hubs the grease caps of the Porsche 944 can be used. Shaft sealing ring / Simmerring are taken over from the original Beetle. Scope of delivery: 2x special plates / spacers made of aluminium with Porsche 5x130 PCD 2x brake caliper adapters complete mounting screws set Static stress analysis material certificate

€460.20*

VW Golf MK1 Caddy Scirocco Brake Caliper Adapter Porsche Boxter 986 280x22 15 inch Wheel

Brake caliper adapter, front axle, to install the 280mm G60 brake discs, combined with the 4-pistons Porsche Boxter 986er brake caliper. Specially developed to be able to continue using 15-inch rims! Suitable for the following vehicles: Golf MK1 Golf MK1 Cabrio Caddy 14d Jetta 1 Scirocco Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system specially developed to be able to continue using 15-inch rims. brake discs with 4x100 PCD, Therefore, the original Dolf MK1 PCD can be maintained thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. We recommend the brake pads of the Porsche rear calipers, reference 996.352.421. These fit perfectly into the calipers and are perfect for the 280er brake discs! This allows the pads to fit perfectly to the 280 disc without any modification! Required components: brake caliper: 986er Porsche Boxter, reference 986.351.421 / 422 brake disc: VW Golf MK2/MK3 G60, 280x22, reference 6KL 615 301 (only 100% fitting to the specified Porsche calipers) brake pads: from the rear calipers, 996.352.421 (these are smaller and look like the G60 brake pad surface) Delivery: 2x brake caliper adapters for VW Golf 1MK Caddy Scirocco , conversion to Porsche brake system 4x screws (10.9) 1x material certificate The corresponding rear axle adapters for the conversion to 280er internally vented brake discs in combination with S3 brake calipers can be found in our shop.

€181.97*

Caddy 14d disc Brake Caliper Adapter G60 caliper Rear Lowering

Rear axle adapter kit to convert the Caddy 14D rear axle to G60 disc brake. Advantages: ability to brake and vent a lot better than a conventional drum brake top otics and profesionnal conversion lowered rear axle by 25mm thanks to the material certificate supplied with the order and to a correct conversion, it is possible to register your purchase even for series vehicles can always be restored to the original state without any problems With our brake caliper adapters, the G60 brake discs and brake calipers can be installed onto the Caddy 14d. With our adapter, the track is 15mm wider per side and the vehicle ist 25mm deeper on the rear axle. You only need the G60 axle stubs of the rear axle. Delivery: 2x brake caliper adapters (high-strength steel) high-strength mounting screws (10.9) material certificate Installation instructions With this conversion kit, the S3 / R32 brake can be installed in conjunction with our spacer adapter, combined with the 280mm brake discs on the rear axle. In our shop, we also have corresponding adapters for the front axle to convert to the G60 280 brake. Visit our shop!

€135.21*

BMW E36 M3 Brake Caliper Adapter Rear Axle Porsche Rear Brake 328x20

Brake caliper adapters for the rear axle of BMW E36 M3 to install the rear brake caliper of Porsche 986, combined with the 328x20mm E46 M3 brake discs. Thanks to our adapter, the Porsche brake caliper is simply screwed to the original axle instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 986 rear, reference : 986.352.422 + 986.352.421 brake disc: BMW E46 M3 rear 328x20mm Delivery: 2x brake caliper adapters for BMW E36 M3 high strength mounting screws material certificate

€227.56*

VW Golf Corrado Passat 2 3 G60 Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter for 996 Porsche 4-piston brake calipers in connection with the 305x28 Cupra R brake disc suitable for all VW with bolt circle connection 4x100 on the front axle, e.g.: VW Golf 2 und 3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: Brake calipers Porsche 996 Porsche .: 996.351.426 + 996.351.425 (a successful conversion is only possibile with the before mentioned pieces) brake pads from Porsche 996 Brake discs typ Seat Ibiza Cupra R diameter 305x28mm Nr.: 6KL 615 301 Advantages: Significantly better perfomance than the standard brake system. Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete screw material Scope of delivery: 2 high resistant adapter galvaniced(see photo) High resistant screws for fixation Certificate of material

€179.30*

VW Corrado Golf 2 3 Passat VR6 Cayenne ZR18 Brake Caliper Adapter R32 Front Axle Brake System

Brake caliper adapter for Brembo/ Porsche 6-piston brake calipers in connection with the R32 brake disc 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine and plus axle. Suitable for: Golf VR6 Corrado VR6 Passat 35i VR6 These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7.The adapters could also be installed on other types of vehicles after a conversion to VR6 axle. Required material for installation: brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50 brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A Advantages: best possible delay values and performance! Also indispensable for performance increases assembly option on all vehicles with wheel rims size 18' inch Components come from series production by VW If installed correctly, registration with the TÜV is possible. Including complete screw material Is not authorized under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Delivery: 2x brake caliper adapters, completely galvanized (see picture) complete mounting screws set material certificate Template to check whether the brake system fits under your rim tension analysis for easier homologation

€159.56*

VW Golf Corrado Passat G60 Porsche brake system brake caliper adapter brake

Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche /Brembo 4 Piston brake calipers with bolt circle 4x100 on the following VW vehicles: VW Golf 2 und 3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: Brake calipers Porsche 986 Porsche or Porsche 996 part nr.: 986.351.422 + 986.351.421 or oder 996.351.421+ 996.351.422 (written on the caliper) (a successful conversion is only possibile with the before mentioned pieces!!!) Brake discs typ Golf 2/3 G60 diameter 280x22mm Advantages: Significantly better perfomance than the standard brake system. Furthermore wheel rims size 15" can be driven on some vehicles Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete screw material Scope of delivery: 2x brake caliper adapter completely galvanized (see photo) Complete screw set high-strength. Certificate of material Stress analysis for better registration

€199.66*

VVW Passat R36 B6 Type 3C, Golf 5 R32, Golf 6 R and Golf 7 R 4 Motion Adapter Brake Caliper Adapter Rear Axle 310x22 Brake Disc Tuning Adapter

Brake caliper adapter, rear axle (steel knuckle), on models mentioned below, to install the 356x22 mm A6 brake discs, combined with the original caliper. Suitable for following vehicles with original 310x22 brake discs : VW Passat R36 Golf 5 R32 Golf 6 R Touran Caddy They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 356x22 from Audi A6 reference: 4H0 615 601 F original brake caliper and pads Info: If you want to run a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (part number: 4G8.615.601) will also fit, as the Audi S6 S7 S8 brake disc is not available perforated. The brake discs are otherwise exactly identical in dimensions. Delivery: 2x brake caliper adapters VW Passat R36 matching centering rings fastening material material certificate

€152.76*

Audi S2 80 90 RS2 Brake Caliper Adapter 345x30 S8 Brake Disc Brake System

Brake caliper adapter for front axle on Audi S2 Audi 80/90 with original 5x112 or 5x112 bolt circle conversions, for conversion to brake caliper of Audi RS2, combined with the brake discs of Audi S8 345x30. Suitable for the following vehicles: Audi S2 Audi 80 Audi 90 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS2 reference 8A0 615 106 k brake disc: Audi S8 345x30mm reference 4D0 615 301 B Scope of Delivery: 2x brake caliper adapters for Audi 80, 90, S2 ect material certificate

€448.21*

VW Golf MK3 R32 Corrado Passat Syncro Rear Brake Caliper Adapter S3 V6 280mm Brake Disc

Brake caliper adapter, rear axle, for Golf MK3, Corrado, Syncro to install the brake calipers of Golf MK4 V6/R32 , Audi S3 8L, YoC 99, combined with the front brake discs 280mm VR6 . Suitable for the following models of VW and Seat, with Syncro axles: Golf MK3 Syncro Corrado Syncro Passat 35i Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs thanks to the internally vented discs, a better fading better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop. Required components: brake caliper:VW Golf R32 V6 oder S3 VW , reference left 8N0615423C , right 8N0615424C brake caliper mounting bracket: reference 8N0615425B brake disc: Passat 35i VR6 , reference 1H0615301, 280 mm Due to high customer demand, our adapters are supplied in the color black, which is applied with the GNC-OX nitrating process. This process guarantees the best mechanical-dynamic properties against wearing out. Delivery: 2x brake caliper adapters complete screw kit material certificate stress analysis

€151.77*

VW Polo 9N Audi S3 335x22 Brake Caliper Adapter Rear Axle

Brake caliper adapter, rear axle, for Polo 9N to convert the 335x22 mm Phaeton brake discs, combined with the original R32 / S3 brake calipers. Suitable for the following vehicles (only 4WD: Polo 9N Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi S3 8L or VW Golf R32 brake disc: internally vented VW Phaeton 335x22mm , reference 4E0615601L (modification of the PCD 5x112 to 5x100 is necessary. This can be modified by us at an avarage price of 59.- € per disc set Delivery: 2x brake caliper adapters high strength mounting screws (10.9) material certificate

€219.00*

VW Golf 4 VW Polo 6r WRC Audi A3 TT R32 S3 Caliper Brake Adapter Brake Caliper Mounting Bracket

Brake Conversion kit with brake caliper adapters / brackets to allow fitment of the large rear brake system (256x22) from Golf 4 V6 4Motion R32, VW Polo 6r WRC, Audi TT, S3 on all vehicles with front drive of the series Golf 4 Golf 4 TT A3.The adapters are made of high-strength steel and are supplied galvanized Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificat the brake calipers from the 4Motion models can be fitted with our brackets. Thus, you avoid the purchase of Jubi caliper supports costing around 120 €, and which are difficult to find. Required components: original VW/Audi brake caliper 4motion original large 4motion VW/Audi disc brakes 256x22 Delivery: 2x brake caliper adapters High strength mouting screws material certificat

€34.52*

Audi S2 brake caliper adapter rear axle 302x12 brake disc brake system conversion

Brake caliper adapter to mount 302x12mm brake discs on the rear axle of the Audi S2 Coupe (not suitable for Avant and Limo) and identically constructed rear axles Audi A6.With our adapters, the original Audi S2 Coupe brake calipers on the rear axle can be retained. The brake caliper carrier must be minimally processed with a file (0.5-0.7 mm) on the inside dimension where the disc runs! Required components: A6 brake discs from all-wheel drive 302x12mm is the exact part number: 24.0112-0176.1 412176 Advantages of this brake system: Extreme deceleration values also in connection with our front axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. We also offer a suitable brake system for the front axle. Have a look in our shop! Scope of delivery: 2x brake caliper(see picture) high-strength screw material material certificate

€151.11*

VW Golf 4 R32 Audi S3 Polo VW Polo 6R WRC 335x22 brake disc brake caliper adapter rear axle

Brake caliper adapter, rear axle, for the models Golf R32 Audi S3 to install the Phaeton brake dics 335x22 mm, combined with the original caliper R32 / S3 Suitable for the following vehicles (4WD only): VW Golf 4 R32 Audi S3 Audi TT quattro 8N VW Bora 4 Motion VW Polo 6R WRC Seat Leon Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 5x100, what we can do ourselves in our workshops) rear axle brake caliper with bracket from Audi S3 8L or VW Golf R32 on the handbrake cable, some of the sheathing must be removed in front of the wishbone, then you can pull the cable in a little further Delivery: 2x brake caliper adapters, VW Golf MK4 R32 Audi S3 complete screw kit (10.9) copy of vehicle documents to simplify the registration material certificate

€167.84*

VW T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter

Brake caliper adapter to convert the T3 BUS on the front axle to ventilated 312x25mm brake discs with Audi A6 calipers. An independent conversion description from one of our customers can be found here: https://schrauberlaube.de/'page_id=25899 Advantages of this brake system: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. Very cheap procurement of the components. Brake calipers can be found used for as little as 49 euros/new for as little as 70 euros. TÜV registration possible with the supplied material certificate Quick and easy assembly possible with the supplied screws! Required material for installation: Brake discs 312x25 mm Audi A4 quattro, Audi A6 e.g. 4B0 615 301 A Brake calipers Audi 100 / A6 C4 Girling / ATE 57 Part No: 4A0615123A / 4A0615124A (left, right) Brake caliper brackets that were installed with the 288 brake system. Part number: 3B0615125 Wheel hubs (click here) to center the brake disc are also available in our shop. Only suitable for the 14 inch axle of the T3 (to be found on the brake caliper fastening screw, this must have a 16mm thread) At least 16 inch rims should be used so that the diameter of the brake disc fits underneath Scope of delivery: 2x brake caliper adapters for VW T3 Bus matching centering rings Set of high-strength screws Vehicle registration copy for easier entry stress analysis You can find installation instructions from a customer here: https://schrauberlaube.de/'page_id=25899

€137.56*

Audi TT 8j Quattro Rear Axle Brake Caliper Adapter 356x22 mm A6 Brake Disc

Brake caliper adapter on Audi TT 8j Quattro model, rear axle for conversion to 356x22 mm A6 brake discs, combined with the original brake calipers. Suitable for following vehicles with original 310x22 brake discs Audi TT 8j Quattro Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake discs: 356x22 from Audi A6 , reference 4H0 615 601 F original brake calipers and pads from Audi TT 8j Quattro perforated Wave brake disc from Audi RS7 356x22 mm part number: 4G8.615.601 Info: If you want to run a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (part number: 4G8.615.601) will also fit, as the Audi S6 S7 S8 brake disc is not available perforated. The brake discs are otherwise exactly identical in dimensions. Delivery: 2x brake caliper adapters for Audi TT 8j Quattro material certificate

€262.99*

BMW E39 5 series adapter Brembo E38 caliper with E46 M3 325x28 brake discs

Brake caliper adapters for the front axle of BMW E39 to install the large Brembo 4 piston brake calipers from E38 BMW, combined with the E46 M3 325x28 mm brake discs. The rims must have at least 17 inch.If the original BMW Styling 65 rims (original E39 M5 rims, with 245 / 40 / 18 tires) are used, 25mm track plates must be installed. Advantages: high deceleration rims have 17 inch thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling screws are supplied Required components: brake discs: BMW E46 M3 325x28 mm reference : left 34 11 2 282 801 ; right 34 11 2 282 802 brake calipers: BMW E38 Brembo 4 piston reference : left 34 11 1 163 757 ; right 34 11 1 163 758 brake pads: BMW E38 Brembo 4 piston reference : 34 11 6 761 254 Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate stress analysis

€151.30*

BMW E36 M3 Porsche 996 Boxter S Brembo Caliper Adapter 345x28

Brake caliper adapter for front axle of BMW E36 and E36 M3, to install the large Porsche Boxter S 4 piston brake caliper, combined with the BMW E46 M3 CSL brake disc 345x28 mm. Rims of at least 18 inch is required. With this adapter, you can also have 17 inch rims with BMW E46 discs in 325x28, but for this, the brake caliper of the Porsche must be adapted to the contact surface. These adapters are supplied galvanized, therefore, anti-corrosive and top optics! Required components: brake disc: BMW E46 M3 CSL 345x28 mm brake caliper: Porsche Boxter S, reference: left 996.351.425 + right 996.351.426 The brake pad must be slightly chamfered at the upper edge, as there is a slight overhang. It doesn't go any lower for reasons of stability Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E36 and E36 M3 high-strength mounting screws material certificate

€196.59*

Golf 5 6 GTI TSFI Audi A3 TT 8P Brake Caliper Adapter Front Axle Brake System

Brake caliper adapter for Golf 5 6 Audi A3 8P , front axle, Audi A3 8P to install the 4 piston brake caliper of Audi TTRS, combined with the 350x32 brake disc of Mercedes. Thanks to our adapter, the Audi TTRS caliper is simply screwed to the original axle instead of the original caliper. Suitable for the following vehicles: VW Golf 5 / 6 Touran Caddy 3 Audi A3 8P Audi S1 They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate can easily be restored to the original state Required components: original TTRS brake calipers. Reference left : 8J0 615 107. reference right : 8J0 615 108 brake pads, reference : 8J0 698 151 E brake discs Mercedes 350x32, reference : 164 421 0512 (MERCEDES-BENZ), 164 421 1412 (MERCEDES-BENZ) Delivery: 2x adapter plates for Golf 5 Audi A3 8P 2x hub centric rings for brake discs high strength mounting screws material certificate

€241.66*

Audi VW Golf 5 A6 A3 S2 Adapter for brake calipers A8 Breaksystem adapter Holder for calipers 335x22

Brake caliper adapter to mount brake discs 335x22mm on the rear axle Audi A8 in connection with the original brake calipers. Adapter is suitable for the following vehicles: VW Golf 5 VW Jetta VW Passat, W8 VW Touran Audi A4 Audi A6 Audi S2 Audi A8 AUDI 200 20V Turbo Required components: Original Audi VW brake calipers Girling 41 or 43, Ideal A8, A8Q installed with original 280x22 brake discs Brake carrier with part number: 4D0 615 425 C, this is the carrier that is originally installed with the 280x22 brake disc A8 brake discs 335x22mm OE NR.3D0615601,3D0615601C,4E0615601L Advantages of this brake system: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. We also offer a suitable brake system for the front axle, see our shop Scope of delivery: 2x brake caliper holder (see picture) materials certificate

€184.06*

BMW E30 325i 320i Brake Caliper Adapter E46 M3 328x20 Brake Disc

Brake caliper adapter, rear axle, for BMW E30 to install the large E46 M3 brake discs, combined with the 328x20 mm brake caliper of Porsche 996.Suitable for M3 E30 models without modification. The brake system can also be installed on all other E30 models without problems. It is only necessary to convert on the M3 E30 steering stub axles or wheel hubs. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Rims: at least 16 inch. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 brake disc: BMW E46 M3 328x20mm, reference 34212282303 or 34212282304 Delivery: 2x brake caliper adapters for BMW E30 high-strength mounting screws copy of a vehicle document to simplify the registration material certificate

€323.08*

BMW 3er E92 E93 E91 M Brake Caliper Adapter Brake F30 F31 Brake Caliper Conversion M2 M3 Brake Disc 380x30 4-piston

Brake caliper adapter for the front axle of all BMW M models E92 E93 E91 E90 for conversion to the BMW F30/31 4-piston brake caliper, combined with the 380x30mm brake discs of BMW M2/3/4. Suitable for the following vehicles (M models): BMW E90 BMW E91 BMW E92 BMW E93 Advantages of this brake system top deceleration, without comparison with conventional brake discs better performance supplied material certificate can easily be restored to the original state easy assembly: The sleeves with knurls are simply glued / pressed into the brake caliper instead of the original sleeves. The sleeves are eccentric and can therefore be pressed perfectly, so that the brake caliper sits perfectly on the disc. Required components: brake caliper: BMW F30/31 4-piston, reference left: 4116799469 / right: 34116799470 brake disc: BMW M2/3/4, front axle, 380x30mm, reference left: 34112284809 / right: 34112284810 Delivery 1x set of brake caliper adapters for BMW M-Modelle E92 E93 E91 E90 high-strength mounting screws material certificate installation instructions

€223.75*

Brake Caliper Adapter BMW E30 to E34 540i Brake Disc E36 M3 315x28

Brake caliper adapter for front axle of BMW E30 with BMW E36 or E46 wheel hub to install the 315x28 brake discs from E36 M3.Brake caliper from BMW E36 M3 are required, combined with brake caliper bracket of E34 540i. Required components: brake caliper: BMW E36 M3 brake caliper mouting bracket / support: BMW E34 540i brake disc: BMW E36 M3 315x28mm original reference: 34112227171 conversion kit to convert to 5 holes hub (item number 126 in our shop ) Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters (see picture) 2x spacer plates 12mm high-strength mounting screws copy of a vehicle document to simplify the registration material certificate rims: at least 17 inch

€223.63*

VW Golf MK3 VR6 Passat Corrado Seat Toledo Brake Caliper Adaper Brake System GT3 911 996 Turbo

Brake caliper adaper for Porsche 911 GT3 and 996 turbo (also called Big Red) Brake calipers combined with the original R32 brake discs from Golf MK4 R32 334x32mm on all VW models with 5x100 PCD on the front axle. Suitable for all vehicles with plus axle installed in e.g.: VW Golf MK3 2,0l 16V and VR6 GTI VW Passat 2,0l 16V 35i and VR6 GTI VW Corrado 2,0l 16V und VR6 GTI Seat Toledo A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 911 GT3 ,996 turbo , reference: left 996.351.429 / Brembo number 20.7310.03 + right 996.351.430 / Brembo number :20.7310.04 brake discs: Golf MK4 R32 334x32 mm , reference 1J0 615 301AA and 1J0 615 302 A brake pads: from original Porsche 911 GT3 + 996 Turbo calipers Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate

€249.09*

Audi 80 90 S2 brake caliper adapter Audi A8 brake disc 323x30 RS3 brake calipers tuning adapter

Brake caliper adapter to mount the Audi RS3 brake calipers in conjunction with the 323x30 brake discs from the Audi A8, on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions. The standard Audi PCD can be maintained. Furthermore, 16 inch rims can be maintained with this brake system. Required components: brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108 brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1 Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly Our adapters are supplied galvanized, anti-corrosive according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see picture) Stress analysis matching set of screws material certificate

€334.42*

Audi 80 90 S2 brake caliper adapter Porsche 996 brake caliper Audi A8 brake disc 360x34 conversion brake system

Brake caliper adapter to mount the large Porsche 996 Turbo GT3 4-piston brake calipers in connection with the Audi A8 brake disc 360x34mm on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions. Components: Porsche caliper 996Turbo/GT3 parts NR: 996.351.429 and 430 Audi A8 brake discs (4E0615301 A) 360x34mm Zimmermann part no. 100.3305.50 Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages: Significantly better perfomance than the standard brake system. Adaptor does not require rectications on your vehicle,therefore easily transformable in its original condition Our brake adapters do not require the sending in of their serial parts, no re-welding - re-milling or re-drilling The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles We also offer a suitable conversion for the rear axle, see our shop Item is not in stock and will be produced for you after you place your order. Scope of delivery: 2x brake caliper adapters for Audi 80, 90, S2, etc Set of high-strength screws materials certificate Copy of the vehicle registration document stress analysis

€233.08*

Opel Kadett C Coupe Manta Ascona 16V C20xe Brake caliper Caliper Adapter Front axle brake disc system

Full adaptation/fixation kit for ventilated 16V brake system (calipers and discs)coming originally from Kadett E Calibra Vectra A Astra GSI /16V C20XE for installation on front axle of the following cars: Kadett C Limo Coupe and City Manta B Ascona B Advantages: Best possible deceleration values and performance, also indispensable for performance increases Centering and screws for GSi brake disc available Internally ventilated brake discs, no more overheating and fading. 14 inch rims can be driven Components come from series production by Opel and are easy to obtain If installed correctly, registration with the TÜV is possible. Our adaptation plates need to be installed between the original fixation of the brake disc an the brake disc on the wheel hub.This allows to maintain the width of the wheel lane.There is a centering for the GSI brake disc on the adapters. Rectifications needed for the execution of the conversion: a steering stopper needs to be installed. the centering of the brake disc needs to be modified 70,1 mm on the mesure of our adapter plate (also made by EPYTEC) Scope of delivery: 2x adapter plates completely galvanized 8x high-strength screws to mount the brake disc, these must be shortened so that the full thread of the wheel hub can be used material certificate For the rear axle brake system on we suggest a conversion set from our shop.

€181.05*

VW Golf MK3 VR6 Corrado Passat 35i Adapter Porsche Brake Caliper Adapter

Brake caliper adapter for original Seat Leon Cupra R 323th brake discs, combined with 4 piston Porsche Brembo calipers. Suitable for all models with VR6 plus axles: Golf 3 VR6 Corrado VR6 Passat 35i VR6 Required components: brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422(written on the calipers, back number distinguishes right and left caliper) (only 100% suitable with the specified Porsche caliper )Brembo reference : left 20.7673.03 + right 20.7673.04 original brake pads from the 955.352.421 + 955.352.422 brake caliper are used brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance suitable for 17 inch rims components come from the production series of VW registration is possible if correct assembly including set of mounting screws Delivery: 2x brake caliper adapters, galvanized (see picture) set of high-strength mounting screws material certificate stress analysis

€129.65*

Audi S4 A4 B5 Brake Caliper Adapter Rear Axle Cayenne 4-piston 330x22 Brake Disc Tuning Adapter

Brake caliper adapter, rear axle, on models Audi S4 A4 B5 for conversion to the Porsche Cayenne brake calipers.Combined with the 330x22 mm brake discs from Audi A6, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S4 B5 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): Audi A4 B5 Audi S4 B5 Advantages of this brake system: top deceleration, without comparison with conventional brake discs perfectly matches our brake caliper adapter for the front axle must have for better performance supplied material certificate Required components: Handbrake caliper original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 424 C, 8D0 615 423 C Brake caliper carrier original Audi S4 B5 for 22mm thick brake discs, part number: 8D0 615 405 S Brake calipers from the Porsche Cayenne from the rear axle part number: (stands on the rear number on the brake calipers, distinguishes right and left calipers) 955.352.421 + 955.352.422 (only 100% suitable with the specified Porsche calipers) Brembo NR:20.7673.03 Rear brake disc 330x22 from the Audi A6 part number: 562507JC Delivery: 2x brake caliper adapters for Porsche Cayenne caliper 2x brake caliper adaper to adapt the hand brake caliper high strength mounting screws material certificate Stress analysis

€358.04*

VW Golf 3 Brake Caliper Adapter Porsche Vr6 GTI Passat 35 16V ZR17 ZL17 Front axle Brake System 334x32

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 on the front axle. Installed in e.g VW Golf 3 2,0l 16V und VR6 GTI VW Passat 2,0l 16V 35i und VR6 GTI VW Corrado 2,0l 16V und VR6 GTI Seat Toledo Required material for installation: Brake calipers from the Porsche Cayenne or VW Tuareg (17 inch variant) part number: 7L6 615 123 T and 7L6 615 124 T Brake pads are used by the 18 inch calipers Item No: 7L0 698 151 J Brake discs from the Golf 4 R32 334x32 mm part number 1J0 615 301AA and 1J0 615 302 A Advantages: Best possible deceleration values and performance, also indispensable for performance increases 17 inch rims can be driven Components come from series production by VW The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Including complete with screw material Scope of delivery: 2 high resistant adapter-plates allowing the installation of the brake calipers and disc(see photo) 1 Complete set of high resistant srews Template to check whether the brake system fits under your rim Certificate of material;proves the conformity of our product in Germany and simplifies authorization by authorities. Stress analysis / FEM calculation for entry

€133.47*

Ford Focus Volvo S40/V50 C30 C70 ST Brake Caliper Adapter Porsche 996 Jaguar 355x32 Brake Disc

Brake caliper adapter suitable for all: Ford Focus MK2 (except RS) Volvo S40/V50 C30 C70 , YoC from 2004 combined with the Porsche 996 4 piston brake calipers and the 355x32mm brake discs from Jaguar. Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 , reference 996.351.430 brake disc: Jaguar XK 8 4,2L 355x32mm reference C2C25337 (also available from EBC directly from us) Lieferumfang: 2x brake caliper adapters for Ford Focus MK2 ST and Volvo S40/V50 C30 C70 high strength mounting screws 2x centric rings corresponding steel braided brake lines material certificate copy of vehicle document to simplify the registration Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€494.52*

Golf MK1 Polo G40 Caddy 14d Brake Caliper Adapter type G60 Brake SystemVW 280x22

Brake caliper adapter, front axle for Golf MK1 Polo G40 to convert to G60 ATE / Girling 54 brake calipers, combined with the G60 280x22 brake discs. Suitable for the following models: Golf MK1 Golf MK1 Cabrio Caddy 14d Jetta 1 Scirocco 1/2 Passat Polo 1/2 Advantages of this brake system no more fading with the G60 brake system. thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: G60 280x22 brake caliper: G60 ATE / Girling 54 brake caliper mounting bracket: G60 ( important: it must necessarily be the bracket of the 280 brake, and not of the 256. The 256 are too short) Tip: If you don't have the brake caliper carrier and brake calipers yet, we have the perfect solution for you here (click here).The brake caliper carriers were developed in such a way that you no longer have to install an adapter to install the G60 system on your vehicle.You can mount the brake calipers and brake caliper brackets directly on your vehicle. What is the difference between item number 216 and 142' The hole dimensions of the two tuning adapters are identical. We recommend always to install the article 216, because it is more stable. The tuning adapter 142 we have developed for the VW Polo axle, since this is slightly different in shape and the tuning adapter 216 can not be installed. Delivery: 2x brake caliper adapters copy of vehicle document to simplify the registration. high-strength mounting screws installation instructions material certificate

€89.94*

BMW E46 M3 Brake Caliper Adapter Rear Porsche Caliper E46 M3 328x20 Brake Disc

Brake caliper adapter on rear axle of BMW E46 M3 for the conversion to the large E46 M3 328x20 mm brake discs, combined with the caliper of Porsche 986. Suitable for all M3 E46 models without required modifications. The brake system can also be mounted on all other E46 models without problem. It is only necessary to convert to the M3 E46 axle stub / pin or wheel hub. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Rims: at least 16 inch.click here for installation instructions Required components: brake caliper: Porsche 986 reference 986.352.421 + 996.352.422 brake disc: BMW E46 M3 328x20mm reference 34212282303 + 34212282304 Front brake pads from Porsche Boxster 986 2.7 the brake pads must be slightly chamfered at the upper edge, as they are slightly overhanging Delivery: 2x brake caliper adapters for BMW E46 M3 high-strength mounting screws material certificate Stress analysis / FEM calculation for entry vehicle document to simplify the registration installation instructions

€175.60*

Chrysler 300C brake system brake caliper adapter Audi RS6 brake 360x32

Brake caliper adapter on front axle of Chrysler 300c for conversion to the large 8 piston brake calipers, combined with the 360x32mm Chrysler 300c brake discs. Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: VW Phaeton 5.0 V10 W12 8 piston , Brembo reference 20.7675.02 brake discs: Chrysler 300c 360x32mm , reference 5290537 brake pads: Audi , reference 8e0698151h / Brembo reference p85078 Delivery: 2x brake caliper adapters (see picture) Set of high-strength screw material material certificate

€311.34*

Opel Kadett Astra Omega Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter to use Porsche 6-piston calipers from the Porsche Cayenne (18 inch) part number 955.351.421 / 955.351.422, in conjunction with the brake discs from the A8 A6 S8 with the dimensions 347x30 part no. 4F2 4F5 PR 1ZL these only have to be attached to the centering can be adjusted. Perfect fit for all Omega A B. With wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra struts to mount. Relatively low conversion effort for enormous braking power Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. tipps und tricks: The Audi brake disc fits despite the different bolt circle of 5x112 because there are M14 holes in the brake disc. The brake disc only has to be turned to the centering diameter from 68mm (Audi) to 70mm (Opel). This means the disc is perfectly centered 8can also be done in-house. Info: The pre-facelift wheel hubs are larger in diameter than the facelift wheel hubs, so they either have to be turned off in the outer diameter or the facelift wheel hubs with wheel bearings must simply be used. The included bushings are optional because there were two different axle types, but in most cases they are not required. Scope of delivery: 2 x caliper adapters Set of high-strength screws materials certificate Stress analysis for better registration

€306.79*

Brake Caliper Adapter Golf Corrado Passat 2 G60 Porsche 996 Brake System Golf 4 R32 Brake discs 334x32

Brake caliper adapter on Golf MK2 G60 models for conversion to Porsche 996 brake caliper, combined with the Golf MK4 R32 brake discs, 334x32mm. Suitable for the following vehicles with 4x100 hub PCD: Golf MK2 Golf MK3 Passat 35i Corrado Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 996 turbo , reference left 996.351.429 + right 996.351.430 brake discs: Golf 4 R32 334x32 mm , reference 1J0 615 301A and 1J0 615 302 A modification of the disc PCD to 4x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€299.34*

Golf 2 3 Corrado Passat VR6 RS2 Audi Porsche Calipers Brake system Brake caliper adapter 323x28

Brake caliper adapter for original Seat Leon Cupra R 323x28 brake discs with 4 piston Porsche 993 Turbo or Audi RS2 calipers on all VW with bolt circle connection with 5x100 on the front axle. VW Golf 3 2,0l 16V und VR6 GTI VW Passat 2,0l 16V 35i und VR6 GTI VW Corrado 2,0l 16V und VR6 GTI Seat Toledo Required material: Brake calipers from the Porsche 993 Turbo Identical in construction to Audi RS2 brake calipers Part No.: 993.351.426 + 993.351.425 (only 100% suitable with the specified Porsche and Audi calipers) Brake discs typ Seat Leon Cupra R 323x28mm part no.: 1ML 615 301 Advantages: Best possible delay values and performance! Also indispensable for performance increases the material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Scope of delivery: 2x brake adapter galvaniced (see photo) High resistant screws Certificate of material

€334.40*

Seat Ibiza 6L VW Polo 9N Audi A1 Adapter Porsche brake caliper rear axle

Bremssattel Adapter um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280 mm G60 VR6 GTI 16V Bremsscheiben an der Hinterachse zu fahren. Adapter sind passend für folgende Modelle: Ibiza 6L Polo 9N Audi A1 Vorteile dieser Bremsanlage: Top Verzögerungswerte! Kein Vergleich zur den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Einfach wieder in original Zustand rückrüstbar Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Die Spur wird um ca 16 mm pro Seite breiter. Nicht im Bereich der STVO zugelassen. Durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden.Passend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop!Bei Fahrzeugen mit ABS kann das ABS weiter verwendet werden Benötigte Komponenten: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 Stück Bremssattel Adapter hochfestes Befestigungsschraubenmaterial Materialzertifikat

€432.42*

VW Golf R32 Corrado 1 2 3 S3 Rear Brake Caliper Adapter G60 VR6 256x22

Brake caliper adapter for Golf MK1 MK2 MK3 to install rear internally vented brake system from Golf MK4 V6/R32 Audi S3 8L, YoC 1999, (256x22 bracke disc). Suitable for the following VW and Seat models: Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Polo 9N Seat Cordoba Seat Ibiza Seat Toledo Golf 1 (Nur bei Umbau auf 5x100 Lochkreis/Passende Radnaben für die Vorderachse gibt es bei uns im Shop) Advantages of this brake system: top deceleration, without comparison with conventional brake discs registration is possible by using original VW / Audi parts better eperformance 5x100 P.C.D. is maintained cheap spare parts Required components: R32/S3 bracke discs rear (256x22 5x100 P.C.D) R32/S3 bracke caliper rear Brake caliper carrier part number: 8N0615425B axle pin, reference. 6XO 501 117 and 6XO 501 118 (right and left) built in Polo 1995-2002 und Lupo 1999-2006 article APA259 Polo 9N hub, part number FAG: 713610490 Other conversion options: As can be seen from the pictures of our customers, it is possible with this system to install the brake discs Phaeton 310x22, combined with brake calipers of the Golf 5 R32. Delivery: 2x adapter plates 2x spacer plates copy of vehicle documents to simplify the registration material certificate For the front axles, we propose you caliper adapters for conversion to Porsche brake system, combined with R32 brake discs. Visit our shop!

€95.31*

VW Golf MK2 Syncro Golf MK3 VR6 Brake Caliper Adapter Golf MK4 Hub Conversion Porsche R32 Syncro 310x22

Brake caliper adapter to modify the rear axle from Golf MK3 VR6, combined with the Golf MK4 wheel hub.The conversion is combined with the 310x22 mm brake discs from VW Phaeton. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): VW Golf MK3 Syncro VR6 VW Golf MK2 Syncro VW Jetta II Syncro VW Passat Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: VW Golf R32 V6 or S3 caliper. Left VW reference 8N0615423C, right VW reference 8N0615424C brake caliper support / bracket. Reference : 8N0615425B Porsche brake caliper reference: 996.352.421 + 996.352.422 brake disc: 310x22 rear from VW Phaeton The bolt circle of the disc must be re-drilled 5x100. The re-drilling we also offer you with pleasure (click here) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x centric rings high strength mounting screws material certificate

€599.71*

VW Syncro T3 BUS 16 Inch Front Axle Audi Ate 57 Brake Caliper Adapter Brake 312x25

Brake caliper adapter on T3 bus Syncro ( 16 inch axle ) for conversion to internally vented 312x25 brake discs, combined with Audi A6 brake caliper. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake discs: 312x25 mm Audi A4 Quattro, Audi A6, e.g. 4B0 615 301 A brake calipers: Audi 100/A6 C4 Girling/ ATE 57 brake caliper mounting brackets from 288th brake system at least 16 inch rims These adapters are designed for the T3 4WD / Syncro and 16-inch axle models. For the rear-wheel drive engines, you will find the corresponding adapters in our shop. Delivery: 2x brake caliper adapters for 16-inch axle 2x spacer plates under the bracke discs, 3 mm high-strength mounting screws material certificate

€257.32*

Caliper adapter VW Audi A3 S3 TT VW Golf 4 Bora Polo 9N Porsche 996 brake

Brake caliper adapter for Porsche or Brembo 4 piston brake calipers from the rear axle of the 996 in connection with the Audi 312x25 brake disc. To be installed on the front axle of the following vehicles: Audi A3 (8L) Audi S3 (8L) Audi TT (8N) VW Golf 4 VW Bora VW Beetle VW Polo (9N) VW Polo 6R WCR Seat Ibiza Seat Leon Components required: Brake calipers from the Porsche 996 (rear axle) Part number: 996.352.422 + 996.352.421 (only 100% compatible with the specified Porsche calipers) Brake discs from the Audi S3 (8L) / Golf 4 GTI 312x25mm part NO. 8N0 615 301 A Benefits: Extreme deceleration values also in connection with our rear axle brake system the material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above-mentioned models and can therefore be easily restored to the original state at any time Our EPYTEC brake caliper adapters do not require your serial parts to be sent in, no welding, milling or drilling. Delivery: 2x brake caliper adapter (see picture) Complete screw material (high strength) Material certificate

€196.97*

Audi A4 A6 Passat 3BG Skoda Audi TT Brake Caliper Adapter 370x32 Brake Disc TTRS Bremssattel

Brake caliper adapter, front axle, for Passat 3BG serie to convert to the TTRS brake calipers, combined with the original TTRS brake discs Suitable for the following models: Passat ( 3B2 3BG ) Audi A4 (8D2 B5 ) Audi A6 ( 4B C5 ) Skoda Superb ( 3u4 ) As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , reference right 8J0 615 108 brake disque: TTRS 370x32, reference 8J0615301F (RS3 dics are not suitable) brake pads: reference 8J0 698 151 E Delivery: 2x brake caliper adapters 2x spacers under discs copy of vehicle documents material certificate

€251.37*

VW T4 Bus Audi TT TTRS RS3 Audi TT Brake Caliper Adapter 345x30 Brake Disc

Brake caliper adapter, front axle, for VW T4 bus, to convert to TTRS brake calipers, combined with the Golf 5 R32 brake discs. Suitable for the following model: VW T4 Bus Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108 brake disc: Golf MK5 R32 345x30mm , reference J0615301F ( brake pads: reference 8J0 698 151 bore hole of brakce disc muss be modified to Ø=68mm minimal hub Ø=139mm . Delivery: 2x brake caliper adapters for VW T4 Bus. Conversion to TTRS high-strength mounting screws material certificate

€204.15*

Ford Taunus disc brake adapter rear axle brake caliper adapter brake caliper

1 set rear brake caliper adapter for Ford TaunusWith these adapters, the internally ventilated Sierra / Scorpio brake system can be used on the Taunus rear axle. All you need is the discs and calipers from the Sierra/Scorpio! Advantages: No overheating like currently with the standard drum brakes. Assembly option on all vehicles with wheel rims size 13'' Easily transformable in its original state. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Brake disc size: 253x20mm internally ventilated 4x 108 bolt circle Scope of delivery: Brake caliper adapter made of high-strength steel materials certificate

€299.00*

Audi A4 S4 B7 TTRS Audi TTRS Brake Caliper Adapter

Brake caliper adapter, front axle, for Audi A4 S4 to convert to the TTRS brake calipers, combined with the Audi A4 320x30 brake discs. Suitable for the following models: Audi A4 B7 Audi S4 B7 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 , right 8J0 615 108 brake disc: Audi A4 S4 320x30mm , reference 8E0615301AD brake pads: reference 8J0 698 151 E Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€249.00*

VW Golf 4 Polo 9N Bora VW Polo 6r WRC Audi A3 TT TTRS RS3 Audi TT brake system brake caliper adapter 370x32

Brake caliper adapter, front axle, for Golf MK4 serie to convert to TTRS brake calipers, combined with the original TTRS brake discs. Suitable for following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6r WRC Seat Ibiza Seat Leon As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left 8J0 615 107 Bremssattel , reference right 8J0 615 108 brake pads: reference 8J0 698 151 E brake disc: TTRS 370x32 mm , reference 8J0615301F (RS3 not suitable) modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters 2x spacers under discs scews high-strenghen material certificate

€314.09*

Subaru Imbreza WRX Bremssattel Adapter Bremsscheibe WRX 289mm

Bremssattel Adapter für den Subaru Imbreza von Baujahr 1993- 2000 ( Nicht passend beim STI ). Mit unserem Bremssattel Adapter kannst du die große Bremsanalage vom Subaru WRX ab Baujahr 2001 verbauen Vorteile dieser Bremsanlage: Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Bremssättel vom Subaru Imbreza WRX ab Baujahr 2001 Teilenummer: 26692FA060 / 26692FA041 Bremsscheibe 289mm Teilenummer: 26700-AE081 Lieferumfang: 2x Bremssattel Adapter für den Subaru Imbreza WRX von Baujahr 1993-2000 komplettes Befestigungsmaterial Material Zertifikat

€269.00*

Passat 3BG Skoda Superb Audi A6 C5 4B Rear axle Brake disc system Brake caliper adapter Conversion S6 4F 330x22mm

Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers. Tailor-made for Audi /VW vehicles with front-wheel drive and serial brake discs typ 256x22mm. Construction year: From ’96 on as: AUDI A6 (4B, C5) AUDI A6 Avant (4B, C5) VW Passat (3B + 3BG ) VW Passat Variant (3B + 3BG ) Skoda Superb (3U4) Required material for installation: Passat 3BG Audi S4 B5 brake calipers Lucas Girling 54 (Originally they’re mounted with 256 x22 mm brake discs) Brake discs typ S6 4f 330x22 mm OE-VAG no: 4F0 615 601 F (ATE Nr: 24.0122-0223.1 ) Advantages: Best possible delay values and performance! Also indispensable for performance increases Components come from series production by VW/Audi The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles. Scope of delivery: 2 high resistant adapter-plates(see photo) Certificate of material

€209.27*

VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter

Complete conversion kit to convert the T3 BUS to brake discs on the rear axle. Advantages of this brake system are:: Top deceleration values no more overheating and fading of the brakes Very favorable procurement of the components TÜV registration with supplied material certificate possible Quick and easy assembly by supplied screws! including brand new wheel hubs with wheel studs Required conversion components:: Brake discs 268x10 height 45,7 from VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) (1995 ) VW NR: 7M0615601 brake caliper Girling 38 OE NR:191615423 + 191615424 matching brake caliper holder OE NR :1H0615426 Brake pads OE NR: 1H0698451F VW Golf 3 4 G60 VR6 etc. it must be checked whether possibly longer wheel bolts for the rear wheel hub must be used, when using e.g. track plates or the rim thickness. Handbrake cable from VW Golf 2 and Jetta OE NR: 191609721D Length: 1840/1220mm Advantages:: Extreme deceleration values also in conjunction with our rear axle brake system. Due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series vehicles Direct fit to above mentioned models and therefore at any time problem-free again into the original condition re-toolable Our EPYTEC brake caliper adapters require no sending in of your series parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x brake caliper holder 2x new manufactured wheel hubs matching centering rings material certificate Complete set of high strength bolts for both sides.

€440.81*

%

VW Golf 5 6 Audi A3 TT S3 8P Seat Leon Cayenne ZR18 Front Brake Caliper Adapter R32

Brake caliper adapter for the front axle on VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more for the Brembo / Porsche 6 piston calipers in conjunction with the 350 x 32 mm brake disc. Suitable for the following vehicles: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 The brake calipers were built in series for the Porsche Cayenne, VW Touareg, and Q7. They are suitable for vehicles having an axle stub made of steel and not of aluminum. Required components: brake caliper: Porsche Cayenne oder VW Touareg (18 inch version),reference 955.351.421.50 + 955.351.422.50 VW: 7L6615150 / 7L6 615 150 brake disc: Mercedes 5x112 PDC 350x32mm reference : 164 421 05 12 + A 164 421 05 12 Advantages of this brake system: top deceleration, without comparison with conventional brake discs, better engine performance components come from the series production of VW registration is possible if correct assembly. including set of mounting screws Delivery: 2x brake caliper adapters, completely galvanized (see picture) 2x centering rings for brake discs 4x corresponding bushs complete mounting screws set Template to check whether the brake system fits under your rim material certificate

From €141.90*

VW Golf 4 Polo VW Polo 6R WRC 9N Bora Audi A3 TT brake system brake caliper adapter GT3 911 996 Turbo 334x32

Brake caliper adapter on Golf MK4 series for conversion to 911 GT3 and 996 turbo brake calipers (also called Big Red), combined with the original R32 brake discs from Golf 4 R32 ( 334x32, 5x100 PCD) Suitable for the following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6R WRC Seat Ibiza 6L Seat Leon 1M A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Vorteile dieser Bremsanlage: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers Porsche 911 GT3 und 996 turbo,reference: left 996.351.429 / Brembo reference 20.7310.03 + right 996.351.430 / Brembo reference 20.7310.04 brake pads: from original 911 T3 and 996 turbo calipers brake discs: Golf 4 R32 334x32mm , reference 1J0 615 301AA and 1J0 615 302 A Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate stress analysis

€183.45*

Porsche HA Adapter mit Radnabe ohne S3 /Golf 3

Bremssattel Adapter mit speziellen Radnaben für Fahrzeuge mit 4x100 oder 5x100 Lochkreis um die hinteren Bremssättel vom Porsche 996 in Verbindung mit den vorderen 280mm Vr6 Vorderachs Bremsscheiben an der Hinterachse zu fahren Adapter sind passend für folgende VW und Seat Modelle: Golf 1 ( nur in Verbindung mit unseren Achszapfen (Artikel Nr: 313 die wir im Programm haben) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Vorteile dieser Bremsanlage: Top Verzögerungswerte , kein Vergleich zu den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Technik: Die Bremssattel Adapter werden zwischen Achskörper und Achszapfen montiert. Die dafür benötigten längeren Schrauben sind im Lieferumfang enthalten. Mit Hilfe unserer Radnaben (im Shop haben wir auch einen Komplett Kit mit S3 Sättel für die Handbremsfunktion, welchen wir empfehlen) werden die 280mm Bremsscheiben zentriert und angeschraubt.Die Spur wird um ca 16 mm pro Seite breiter. Die Radnaben sind an der Lagerinnenseite baugleich wie die Originale.Daher können die Original- radlager weiterverwendet werden.Nicht im Bereich der STVO zugelassen, durch das im Lieferumfang enthaltene Materialzertifikat kann jedoch eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werdenPassend für die Vorderachse bieten wir Ihnen Bremssatteladapter für eine Umrüstung auf die Porschebremsanlage in Verbindung mit der R32 Bremsscheibe an. Schauen Sie in unserem Shop. Bei Fahrzeugen mit ABS kann der ABS Ring von allen 3er Golf Modellen passgenau an unsere Radnaben übernommen werden. Benötigte Komponente: Porsche Bremssattel Teile Nr: 996.352.421 + 996.352.422 Lieferumfang: 2 spezielle Radnaben mit 4x100 Lochkreis 2 Stück Bremssattel Adapter hochfestes Befestigungsschrauben Material Materialzertifikat

€370.88*

Details

Audi RS6 RS5 RS4 A4 B5 B4 R8 Brembo 8-piston Brake Caliper Adapter A4 B5

Brake caliper adapter, front axle, for Audi RS4 RS5 B5 to convert to die 8-piston brake calipers from RS4 B7 RS6, combined with the original Audi A4 RS4 B5 brake discs (360x32 ). Suitable for the following vehicles: AUDI A4 Avant (8D5, B5) RS4 RS5 B5 Quattro Kombi Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi R8 8-piston / Brembo caliper reference left 8E0615107 , right 8E0615108 brake disc: Audi RS4 B5 360x32 mm , reference 8D0615302B /or RS4 B7 disc 365x34mm reference 8E0615301AB (when the 365x24mm disc is installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated) Delivery: 2x brake caliper adapters (see picture) 4x matching washers for 365mm Stress analysis / FEM calculation for entry material certificate high strength mounting screws

€216.01*

VW Golf MK5 MK6 Plus Audi A3 Jetta Seat Leon Altea TTRS RS3 Audi TT Brake Caliper Adapter 370x32

Brake caliper adapter on Golf MK5 / MK6 models for conversion to TTRS brake caliper, combined with the original TTRS brake discs. Suitable for the following vehicles: VW Golf MK5 / MK6 Golf Plus Jetta 4 Touran Caddy 3 Audi S1 Audi A3 (8P) Seat Leon (1P1) Seat Altea Seat Altea XL The brake calipers were built in series for the Porsche Cayenne, VW Touareg, and Q7. They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: original TTRS brake caliper, left reference: 8J0 615 107 / right reference 8J0 615 108 brake pads: refence 8J0 698 151 E brake discs from TTRS 370x32 mm reference: 8J0615301F (RS3 discs do not fit, another depth) Delivery: 2x brake caliper adapters high-strength mounting screws (10.9) material certificate

€228.85*

VW Golf 1 Caddy 14D Scirocco brake caliper adapter Porsche 996 brake system Abarth brake brake caliper adapter

Brake caliper adapter for front axle brake system from Golf 1, Golf 1 Cabrio, Caddy 14d, Jetta 1, Scirocco.Allows the installation of brake discs typ Abarth diameter 305x28 mm in combination with Porsche 986 4 Piston brake calipers. Advantages of this braking system: Extreme deceleration values also in connection with our rear axle brake system Brake discs with 4x100mm bolt circle. Therefore, the original Golf 1 bolt circle can be retained. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling Required components: Brake discs Abarth Punto EVO 305x28 Total height 45mm Original part number: 51778054 The hub bore must be widened to 65.00mm (can be done in our house for 59 € for the pair of brake discs click here) Porsche brake calipers from the 996 Porsche original part no.: 996.351.425/426 (only 100% suitable with the specified Porsche calipers) Not approved in the area of the STVO, but the material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles. Minimum rim size: from 16 inch rim. Depending on the rim shape and type, the minimum size of the inner diameter can vary. Delivery: 2x brake caliper adapter VW Golf 1 Caddy Scirocco on Porsche brake system suitable screw set high-strength 1x material certificate Please have a look in our shop for a brake caliper adapter to transform your rear axle brake disc system on ventilated 280mm brake discs in combination with S3 brake calipers (click here)

€192.86*

Brake Caliper Adapter Rear Axle Audi A4 S4 B5 Audi S4 B7 Brake Disc 300x22

Brake caliper adapter for rear axle of Audi A4/S4, combined with the RS4 B5 brake calipers and brake discs from Audi S4 B7. Suitable for the following vehicles : Audi A4 B5 Audi S4 B5 Advantages of this brake system: discs are cheap, also in our shop high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake discs: Audi S4 B7 300x22 mm , reference 8E0615601K Brake calipers and caliper brackets must be those of the RS4 B5 Delivery: 2x brake caliper adapters high-strength mounting screws material certificate rims: at least 17 inch

€144.82*

Brake Caliper Adapter Audi A6 4b C5 Porsche Boxter 4-piston Audi A8 Brake Disc 335x22mm Conversion Tuning

Brake caliper adapter, rear axle, on models Audi A6 4b, for conversion to the 335x22mm brake discs from the Audi S8, combined with the Porsche Boxter calipers. Advantages of this brake system are: top deceleration system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase possible quick and easy assembly with the supplied mounting screws The original handbrake cable can still be used without any changes. Required conversion components: brake disc: Audi S8 335x22mm, refrence 3D0615601 brake caliper: Porsche Boxter, refrence 996.352.421 / 996.352.422 brake caliper mounting bracket: Audi S6, refrence 4B 4D0615425B hand brake: Audi A6, refrence 4B0615423 / 4B0615424 Delivery: 2x brake caliper adapters for the Audi A6 4B complete set of high-strength screws material certificate

€798.15*

Audi A3 S3 TT VW Polo 6R VW Golf MK4 Bora Porsche Brake Caliper Adapter

Brake caliper adapter for original Seat Leon Cupra R 323er brake discs, combined with 4 piston Porsche Brembo brake calipers on all VW models with 5x100 PCD on the front axle. Suitable for e.g : Audi A3 (8L) Audi S3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Polo 6r WRC VW Beetle Seat Leon Required components: brake calipers from Porsche Cayenne, rear axle. Reference : (The rear number on the brake calipers distinguishes right and left calipers) 955.352.421 + 955.352.422 (100% suitable only for the mentionned calipers) Brembo number ::20.7673.03 brake discs from Seat Leon Cupra R 323x28 reference : 1ML 615 301 Advantages of this brake system: top deceleration, better engine performance, without comparison with conventional brake discs suitable for 17 inch rims components come from the production series of VW registration is possible if correct assembly. including set of mounting screws Delivery: 2x brake caliper adapters, galvanized (see picture) set of high-strength mounting screws material certificate

€155.28*

VW T3 Bus Brake Caliper Adapter Caliper Audi Ate 57 288x25 15-inch Brake System

We finally designed a brake caliper adapter that be installed on the T3 2WD bus (not Syncro) under the 15-inch rims. The adapters are mounted with 288x25 mm internally vented brake discs and with the Audi A6 calipers. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: Brake discs 288x25 mm Audi A4 Quattro, Audi A6 z.B. OE-number:4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparaison numbers :V10-80049 (VAICO), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) bracke calipers Audi 100/A6 C4 Girling/ ATE 57 reference : 4A0615123A/4A0615124A (left, right) Brake caliper brackets required for installing the brake system 288.Part No.4A0615125A (required because of the shorter form of these brackets) Hubs that are also available in our shop, item number 341. A complete kit including hub is also available in our shop, number 657 Only suitable with the 15 inch axle of T3 (you can see it with the screws fixing the calipers. The thread should be 16 mm) Because of the thickness of the brake discs, the track is widened by 7mm for each side. Important!!!So that you can bleed the brake system cleanly, we recommend to mount the brake calipers reversed, i.e. to mount the left brake caliper on the right vehicle side and the right brake caliper on the left vehicle side. Delivery: 1x adapter system for brake caliper 1x complete set of high strength screws for both sides 2x hub centric rings for the discs material certificate

€147.71*

VW T3 BUS Rear axle brake adapter T4 Brake disc transformation Brake caliper adapter

Disc brake adapter to convert the T3 BUS to brake discs on the rear axle of the T4. The holders are made of high-strength steel, completely galvanized. With these adapters, both T4 brake discs, i.e. both the 280 and the 294 brake discs with T4 brake calipers can be used. When buying the components, you only have to make sure that if you want to install the 280 brake disc, for example, you also use the brake calipers and brake caliper carrier that were originally installed with this brake disc. Advantages of this brake system: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Quick and easy assembly possible with the supplied screws The wheel hubs must be turned off for the rear disc or can also be ordered from us. Required material for installation: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601 or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B oor for 16 inch OE number: 7D0615425A Brake calipers from the VW BUS T4 15 inch OE number: 7D0 615 424B or for 16 inch OE number: 7D0 615 424A Longer studs for the rear axle The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721 Suitable adapters for the front axle are also available from us. Scope of delivery: 2x conversion adapter for VW T3 to T4 brake discs for the rear axle Set of matching centering rings Complete set of high resistant srews Certificate of material Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.

€217.96*

VW Syncro T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter

Brake caliper adapter to convert the T3 BUS Syncro to ventilated 312x25 brake discs with Audi A6 calipers. Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes very cheap procurement of the components. You can find used brake calipers from as little as 49 euros/new brake discs from as little as 70 euros TÜV registration possible with the supplied material certificate quick and easy assembly possible with the supplied screws Required conversion components: Brake discs 312x25 mm Audi A4 Quattro, Audi A6 e.g. 4B0 615 301 A. Brake calipers Audi 100/A6 C4 Girling/ ATE 57 part number: 4A0615123A / 124A Brake caliper carrier from the 288 brake system part number: 3B0615125 at least 16 inch rims are required This bracket set is only for T3 models with 4WD / Syncro! You can find suitable holders for all rear-wheel drive vehicles in our shop (click here) Scope of delivery: 2 piece brake caliper holder 3 mm spacer plates under the brake disc complete set of high strength bolts for both sides material certificate

€159.70*

VW Golf 4 Bora 1.8T Audi A3 Adapter Porsche brake caliper rear axle

Brake caliper adapter, rear axle, on all models front-wheel drive Golf MK4, Bora, Vento, Audi A3, etc, for conversion to Porsche brake caliper, combined with Golf MK4 brake disc, front, 280x22. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. The track is widened by 16mm for each side. Suitable for the following VW and Seat models: Audi A3 8L Audi A1 Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 VW Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche , reference 996.352.421 + 996.352.422 brake caliper mounting bracket: rear axle , Audi S3 8L or VW Golf R32 brake disc: Golf MK 4 280x22mm part number: 1J0 615 301 P Delivery: 2x brake caliper adapters for Porsche brake caliper 2x brake caliper mounting brackets for R32 / S3 handbrake function high strength mounting screws material certificate

€567.31*

VW Golf MK4 1.8 T Leon Cupra R Jubi GTI Adapter S3 R32 Brake Caliper Adapter

Brake caliper adapter for Golf MK4, rear axle, to install the brake caliper of R32 / S3, combined with the brake disc 310x22 mm Phaeton. Suitable for following vehicles (only front-wheel drive): VW Golf 4 1.8T 180 PS Jubi GTI VW Golf 4 2,3L 170 PS VW Polo 6r WRC Audi TT 8N Audi A1 Seat Leon Cupra R 1.8T 209 PS Seat Leon Cupra R 1.8T 225 PS. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: internally vented brake discs 310x22 from VW Phaeton, reference: 3D0 615 601 D (PCD 5x112 must be modified to 5x100, which can also be made in our house) brake caliper and brake pads from R32 / S3 part number: 1J0 615 425 D brake support left Bora 1,8t 180HP Golf MK4 jubinot S3/4WDpart numbre: 1J0 615 426 D brake support right Bora 1,8t 180HP Golf MK4 jubinot S3/4WD The adapters are supplied black galvanized, best rust protection and super optics! Delivery: 2x brake caliper adapters VW Golf MK4 Seat Leon Cupra R complete mounting screws set (10.9) material certificate Stress analysis / FEM calculation for entry

€157.09*

Audi TT A3 S3 VW Golf Polo 6r WRC Brake Caliper Adapter Cayenne ZR17 Brake System 334x32

Brake caliper adapter, front axle, for conversion to Porsche or Brembo 6-piston brake caliper ZR17, combined with the R32 brake discs 334x32mm. The brake calipers are installed on models Porsche Cayenne, VW Touareg and Q7. Suitable for all models of VW / Audi with front axle Vorderachse of front-drive-wheel: Audi A3 (8L) Audi S3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) VW Polo 6R WRC Seat Ibiza Seat Leon Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: Brake caliper: Porsche Cayenne or VW Tuareg (17 inch variant), reference 7L6 615 123 T + 7L6 615 124 T Brake pads are used by the 18 inch calipers, item-number: 7L0 698 151 J Brake disc: Golf 4 R32 334x32mm, reference 1J0 615 301AA + 1J0 615 302 A Delivery: 2x brake caliper adapters (see pictures)/li> high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Template to check whether the brake system fits under your rim installation instructions We also have suitable adapters to convert to ZR18 6-piston calipers.

€148.46*

BMW E30 325i 320i Brake Caliper Adapter Rear E34 540i 294 x19 Discs Brake System 5x120

Brake caliper adapter, rear axle, for BMW E30 models to install the large rear axle caliper E34, combined with the disc of BMW E46 328i, 294x19 mm. The rims must have at least 16 inch. Required components: bracke dics rear BMW E46 328i with 294x19 mm , reference: 34 21 1 165 563 brake caliper reart BMW E34 540i ; E32 740i, 750i ; E36 M3 3,0 u. 3,2L reference: 34 21 1 160 399 reference: 34 21 1 160 400 The following modification is required: conversion to PCD 5x120 with BMW Z4 wheel hub Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling screws are supplied The handbrake function continues to exist Delivery: 2x brake caliper adapters high-strength mounting screws copy of vehicle documents to simplify the registration material certificate

€146.69*

Bremssattel Adapter Golf 5 Bora Vento Audi A3 A6 TT Porsche 996 Bremsscheibe Hinterachse

Brake caliper adapter around the rear axle (steel axle) of all front-wheel drive Golf 5 Bora Vento Audi A3 ect. to convert to Porsche. The combination is used in conjunction with the 330x22 mm brake discs from the Audi A6. The Porsche calipers are connected to the vehicle's hydraulics and can therefore develop enormous braking power. However, since these do not have a handbrake function, the rear Audi S3 or Golf 4 R32 is also used as a handbrake caliper adapter. The hydraulic connection is sealed with a blind plug, so it only serves as a handbrake caliper. Adapters are suitable for the following VW and Seat models (front-wheel drive with steel axle): Audi A3 8P Seat Leon SeatToledo Skoda Octavia VW Golf mk5 VW Bora/Jetta mk5 Touran caddy 3 Suitable for all vehicles listed that have a steel knuckle installed (not suitable for vehicles with aluminum knuckles) Advantages of this braking system: Top deceleration values, no comparison to conventional rear brake discs a must when increasing performance Material certificate is included Required components: Porsche brake caliper adapter part no: 996.352.421 + 996.352.422 Rear axle brake calipers with holder from the Audi S3 8L or VW Golf R32 Rear brake disc 330x22 from the Audi A6 part no. 4F0.615.601.B Handbrake cable from the Golf 4 Variant or Skoda Octavia Scope of delivery: 2x caliper adapters for Porsche calipers and R32 / S3 handbrake calipers 2x centering rings high-strength fastening screw material material certificate

€888.47*

Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System

Brake caliper adapter, VW T3 Bus to convert to front 4-piston Porsche Boxter brake caliper, combined with the 312x28mm Mercedes brake disc. With this brake conversion to Porsche brake system, the wheel hubs,which are supplied, maintain the standard VW PCD (bolt circle) and are identical. Therefore the wheel bearing remains the same. The track is wider by about 6 mm per side. Our adapter kit works with or without ABS. Rims: at least 16 inch Required components: brake caliper: Porsche Boxter , reference 996.351.426 + 996.351.425 (only 100% suitable for the mentioned Porsche calipers) brake disc: Mercedes S-Klasse 312x28 , reference WD00604 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see pictures) 2x wheel hubs high-strength mounting screws 2c center rings material certificate Stress analysis / FEM calculation for entry

€315.16*

Seat Ibiza 6L VW Polo 9N Audi A1 Brake Caliper Adapter Porsche Caliper R32 Rear Axle

Brake caliper adapter on rear axle for conversion to rear brake caliper of Porsche 996, combined with the 280 mm VR6 front brake discs. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following vehicles: Ibiza 6L Polo 9N Audi A1 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate can always be restored to the original state without any problems Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The track is wider by about 16 mm per side. Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS can be used. Required components: brake caliper Porsche 996 reference 996.352.421 + 996.352.422 brake caliper Golf 4 R32 VW reference left 8N0615423C + right 8N0615424C brake caliper mounting bracket: VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F brake disc: VR6 GTI 16V 280mm with cup depth 28.5mm VAG-reference: 1H0615301 and VAG-reference 1H0615301A Delivery: 2x brake caliper adapters for conversion to Porsche 2x brake caliper adapters for installing S3 /R32 handbrake caliper high strength mounting screws material certificate

€609.69*

VW T5 T6 Bus Audi TTRS Brake Caliper Adapter 348x30 Brake Disc BMW E70

Brake caliper adapter, front axle, for VW T5 Bus to convert to TTRS brake calipers, combined with the 348x30 brake discs of BMW E70. Suitable for the following vehicles: VW T5 Bus, front axle VW T6 Bus, front axle Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake caliper: original TTRS , reference left 8J0 615 107 + right 8J0 615 108 brake pads : reference 8J0 698 151 E / EBC reference: DP1908 brake disc: BMW E70 348x30mm , reference 34 11 6 771 986 / EBC reference: USR1521 hub bore holes have to be modified ∅=76 mm (you will also get exactly a brake disc in our shop) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€448.18*

VW T3 4-wheel Syncro BUS conversion to Porsche brake caliper adapter brake system brake caliper adapter

Brake caliper adapter for front axle brake system for T3 14 Zoll Syncro to fix brake discs typ Audi A4 A6 diameter 288x25mm in combination with Porsche 996 4 Piston brake calipers. The advantages of this brake system are the perfect deceleration values. Furthermore, the price-performance ratio of the Porsche brake calipers and the brake discs is right. Required components: rear Porsche 996 brake calipers Porsche part number 996.352.421 + 996.352.422 (Only 100% suitable with the specified Porsche calipers) Brake discs Audi A6 A4 288x25 OE numbers: 4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparison numbers: V10-80049 (VAICO ), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) This brake disc system allows the installation of 15” wheel rims.Click here for the matching adapter for the 16 inch axle article 1143 (click here) Advantages: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. Our adaptors do require only small rectifications on your vehicle.Therefore easily transformable in its original condition The registration for public road use should be no problem with correct and complete execution of the work. Scope of delivery: 2 brake adapter (see photo) Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities) High resistant screws for fixation Stress analysis

€174.68*

Golf 3 VR6 Brake caliper system 996er Porsche Caliper Adapter Brake 323x28

Brake caliper adapter for original Seat Leon Cupra R 323 brake discs with 4 piston Porsche Brembo calipers on all VW with bolt circle connection with 5x100 VR6 front axle (plus axle) Suitable e.g. for: VW Golf 3 VR6 and all other 5 holes Seat Leon Cupra R VW Passat VR6 VW Corrado VR Seat Toledo Required components: Brake calipers from the Porsche Boxster S part number: (stands on the brake calipers - rear number distinguishes right and left calipers) 996.351.426 + 996.351.425 (only 100% suitable with the specified Porsche calipers) We recommend the brake pads from the rear caliper 996.352.421+422 BremboPart No: P65008 (these are a little smaller and perfectly suited for the disc surface. The pad therefore does not protrude) Brake discs from the Seat Leon Cupra R 323x28 part number: 1ML 615 301 Advantages of this braking system: Best possible delay values and performance! Also indispensable for performance increases The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Delivery: 2x brake caliper adapter complete/galvanized (see picture) High strength screw material complete. material certificate

€187.56*

VW Golf Corrado Passat 2 3 G60 312x25 S3 Brake Brake Caliper Adapter 996 Porsche

Brake caliper adapter for conversion to the brake calipers from Porsche 996, combined with the brake discs 312x25mm from Audi S3/Golf 4 GTI. Suitable for the following vehicles, for example: VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 (rear axle), reference 996.352.422 + 996.352.421 (only 100% suitable with the specified Porsche calipers) brake disc: Audi S3 (8L) /Golf MK4 GTI 312x25mm, reference 8N0 615 301 A The bolt circle must be re-drilled to 4x100 (with us in house feasible for 99€ for the pair of brake discs click here) It can be used with from 16 inch Delivery: 2x brake caliper adapters (see pictures) complete high-strength screw kit (10.9) material certificate

€192.70*

Audi TTRS TT TTS 8J Passat R36 Brake Caliper Adapter to RS7 Ceramic Brake Disc 356x22

Brake caliper adapter on the models mentioned below for conversion to the large RS7 brake discs, rear axle. Suitable for the following Quattro models : AUDI TT Quattro AUDI TT Roadster AUDI TT 2,0 TDI AUDI TT 2,0 TFSI AUDI TT 2,5 TFSI AUDI TT 3,2 V6 AUDI TT S AUDI TTS AUDI TT RS AUDI TTRS VW Passat R36 Advantages: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS , reference left: 8J0.615.423.E brake disc: 356x22mm RS7 rear, reference: 4G8.615.601 Brake disc internally ventilated 356x22 from Audi A6 Part No: 4H0 615 601 F In the case of 9 mm rims, the handbrake cable must be turned over or the mount on the caliper reworked, otherwise the cable on the inside of the rim flange will drag Info: If you want to drive a cheaper brake disc, the brake disc from the Audi A6 with 356x22mm (part number: 4H0 615 601 F) will also fit. The brake discs are exactly identical in dimensions. Delivery: 2x brake caliper adapters high strength screw set 2x centering ring for brake disc material certificate Stress analysis / FEM calculation for entry

€165.68*

Golf Mk1 Caddy Brake Caliper Adapter G60 S2 Brake System

Brake caliper adapter, front axle, to install on models Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco the 280mm brake disc of Golf MK2 G60, combined with the Audi S2 brake caliper. These adapters were developed by us NEW.Extra for the S2 Girling 60 brake calipers! Required components: brake discs front 280mm diameter Golf MK2 G60 (including Syncro), PassatG60 (including Syncro), CorradoG60 Brake calipers from the S2 Girling 60, part number: 895 615 124 A / 895 615 123 A Brake caliper carrier, part number: 447 615 125 Advantages of this brake system: even more powerful braking than with the conversion to G60 brake by double piston brake still usable with 15 inch. Wheel offset must be tested according to the rim. Spacers plates may have to be installed a registration for public traffic should not be a problem, provided it has been correctly and completely installed. directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Delivery: 2x brake caliper adapters for Golf1, Golf 1Cabrio, Caddy 14d, Jetta 1, Scirocco 1x installation instructions with detailed picture material 1x material certificate Stress analysis for registration

€103.20*

VW Golf 4 VW Polo 6r WRC Bora 1.8T Polo Audi A3 adapter Porsche brake caliper rear axle

Brake caliper adapter to convert the rear axle from all 4WD Golf MK4 Bora Vento Audi A3, etc. to Porsche umzubauen. The conversion is combined with the 310x22 mm brake discs from VW Phaeton rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf 4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With the plates, the track widens by 15mm per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora/Jetta MK4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche reference 996.352.421 + 996.352.422 rear axle, brake caliper with support / bracket from Audi S3 8L or VW Golf R32 brake disc: 310x22 rear from VW Phaeton (must be re-drilled to 5x100, can also be done by us.) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x spacers / track plates under brake discs 4x steel braided brake lines high strength mounting screws material certificate stress analysis

€515.81*

Audi S4 b6 b7 8H Brake Caliper Adapter Caliper Mounting Bracket TTRS RS3 370x32

Brake caliper adapter, front axle, for Audi A4 and S4 b7 to install the calipers TTRS , combined with the original TTRS brake discs 370x32. Suitable for the following vehicles: Audi S4 B7 Audi A4 B7 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: original TTRS brake calipers. reference left : 8J0 615 107. reference right : 8J0 615 108 brake pads, reference : 8J0 698 151 E brake discs Audi TT RS 370x32mm reference 8J0 615 301F Hub bore must be turned from 65mm to 68mm. (also possible in our house, click here) Delivery: 2x brake caliper adapters for Audi S4 B7 high strength mounting screws copy of the vehicle document to simplify the registration material certificate

€433.44*

Bremssattel Adapter Audi A4 S4 C6 TTRS Bremssättel TTRS Bremsscheiben 370x32.

Bremssattel Adapter für den Audi S4 C6 auf die TTRS Bremssättel in Verbindung mit den TTRS Bremsscheiben 370x32. Die Adapter passen für folgende Fahrzeuge : Audi S4 C6 Audi A4 C6 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Die Nabenbohrung der Bremsscheibe muss auf 68mm augedreht werden. ( auch bei uns im Haus machbar ) Lieferumfang: 2x Bremssatteladapter für den Audi A4 S4 C6 Materialzertifikat KFZ Schein mit Eintragung es sollten mindesten 18 Zoll Felgen gefahren werden.

€269.00*

Golf 3 VR6 Corrado Passat 35i 312x25 S3 Porsche 996 Brake Caliper Adapter Brake Caliper Bracket

Suitable for all vehicles with VR5 engine and axle (5x100 PCD ), e.g : Golf VR6 Corrado VR6 Passat 35i VR6 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers from Porsche 996 (rear axle) , referencef: 996.352.422 + 996.352.421 (only 100% fits with the indicated Porsche calipers) brake discs from Audi S3 (8L) /Golf 4 GTI 312x25 mm , reference : 8N0 615 301 A rims: at least 16 inch Delivery: 2x brake caliper adapters (see picture) high-strength mounting screws material certificate

€207.83*

Brake Caliper Adapter Golf MK1 Rear Axle to 310x22 Phaeton Golf MK4 R32 Caliper

Brake caliper adapter, rear axle, for the mentioned below models to install the Phaeton brake dics 310x22 mm, combined with the original R32 / S3 caliper Suitable for the following vehicles (front WD only): VW Golf MK1 VW Gol MK1 Cabrio Caddy 14d Jetta 1 Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake discs 335x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modified to 5x100, what we can do ourselves in our workshops) brake caliper and brake from R32 / S3 The adapters are delivered black galvanized, therefore best rust protection and great look! Delivery: 2x brake caliper adapters VW Golf MK1 MK2 MK3 Caddy Scirocco Jetta VR6, etc 2x axle stubs, left and right 2x wheel hubs 4x100 or 5x100 PCD 2x suitable centric rings complete screw kit (10.9) material certificate

€286.48*

Details

VW T3 BUS Caliper Adapter Brake Caliper Audi Ate 57 288x25 15-inch Brake System

We finally designed a brake caliper adapter that be installed on the T3 2WD bus (not Syncro) under the 15-inch rims. The adapters are mounted with 288x25 mm internally vented brake discs and with the Audi A6 calipers. Advantages: top deceleration system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase possible quick and easy assembly with the supplied mounting screws Required components: brake discs 288x25 mm Audi A4 Quattro, Audi A6 z.B. OE-number:4A0 615 301 C (VAG), 4A0 615 301 D (VAG), 4A0 615 301 E (VAG), 8E0 615 301 Q (VAG) other comparaison number:V10-80049 (VAICO), 100.1216.20 (ZIMMERMANN), 100.1216.70 (ZIMMERMANN) bracke calipers Audi 100/A6 C4 Girling/ ATE 57 reference : 4A0615123A/4A0615124A (left, right) brake caliper brackets required for mounting the 288th brake system. Part No.:4A0615125A(required because of the shorter shape of these brackets) Brake Pads Original Parts NR VW 4A0698151A (We also have matching ones from EBC in our assortment (see accessories on this page below) Only suitable with the 14 inch axle of T3 (you can see it with the screws fixing the calipers. The thread should be 16 mm) Because of the thickness of the brake discs, the track is widened by 7mm for each side. Important!!! So that you can bleed the brake system cleanly, we recommend to mount the brake calipers reversed, i.e. to mount the left brake caliper on the right vehicle side and the right brake caliper on the left vehicle side. Delivery: adapter system for brake caliper complete set of high-strength screws for both sides hub centric rings for the discs matching wheel hubs material certificate stress analysis

€251.60*

Ford Capri Escort Adapter modification brake discs rear axle brake system

Adapter plates for rear axle disc brake system for Ford Capri 1,2,3 and Ford Escort 1 , RS 2000. Full adaptation/fixation kit for brake calipers coming originally from Ford Sierra or Scorpio. No overheating like currently with the standard drum brakes. Assembly option on all vehicles with wheel rims size 13'' Required components: Brake discs from Ford Scorpio Sierra with disc brakes on the rear axle 253x11 Manufacturer number: 5815202536 Brake calipers of the same model. The components from the Scorpio Cosworth with internally ventilated discs can also be used, but it is then important that the brake calipers and brake caliper brackets are also taken from the Corsworth. Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require you to send in your serial parts, no re-welding - re-milling or re-drilling. Scope of delivery: 2x adapter conversion brake discs rear axle for Ford Capri Escort Certificate of material High resistant fixation screws Copy of the german document 'Fahrzeugbrief' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.

€215.09*

Complete Kit Rear Golf MK3 Porsche + S3 5-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32

Brake caliper adapters with special hub / hub adapter for vehicles with 5x100 or 4x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, combined with the front 280mm G60 GTI 16V brake discs on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf MK1 (only with our axle pivot - see item 313 in our shop.) Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche , reference: 996.352.421 + 996.352.422 rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32 front 280mm brake discs from VR6. Total height: 28,5mm VAG reference : 1H0615301 brake disc PCD habe to be modified to 4x100 (service available from EPYTEC) Delivery: 2x special hubs / hub adapters with 5x100 or 4x100 PCD 2x brake caliper adapters high strength mounting screws material certificate

€392.98*

Details

Brake Caliper Adapter Porsche 911 964 996 GT3 Brake System GT3 Brake Disc 350x34

Brake caliper adapter on Porsche 911 964 for conversion to 996 GT3 brake calipers, combined with Porsche GT3 brake discs 350x34 mm Suitable for the following vehicles: Porsche 911 Porsche 964 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original Porsche GT3 brake disc: Porsche GT3 350x34 mm Delivery: 2x brake caliper adapters high strength mounting screws material certificate

€279.00*

Brake Caliper Adapter Audi 200 20v S4 for Porsche 993 Biturbo Brake System

1 pair of high strength caliper adapters for the front axle to mount the Porsche Turbo or the identical large RS2 calipers (also called The Big Red) on the Audi S4 c4 and Audi 200 Turbo 20v. Fits all models that were equipped with the undersized and vulnerable so-called UFO brake. Hole spacing on the brake caliper mounting: 130mm.With our adapters you can combine the Porsche brake calipers with the 323x30 discs from the Audi A6 A8 and S8. This has the following advantages for you: The AUDI bolt circle of 5x112 mm can be retained. therefore no costly Porsche bolt circle conversion. Cost-effective brake discs, you get the pair already for about 150€. Deceleration values similar to Porsche Turbo Only small adjustments to strut and hub nötwendig Problemos again in original condition Rückrüstbar Double the service life compared to the original brake system Brackets are made of high strength steel alloy (Including material certificate) Adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227 By the material certificate included in the scope of supply a registration can be made possible by individual acceptance also with series vehicles Required components: Brake discs part number: 4D0 615 301 J, 4D0 615 301F Brake caliper part number: 993.351.425.10 / 993.351.426.10 (Only 100% suitable with the specified Porsche calipers) Scope of delivery: 2 high strength brake caliper holders for the UFO strut. Material certificate Installation cable

€304.46*

Brake Caliper Adapter Porsche for Audi TT A3 S3 VW Golf Polo

Brake caliper adapter, front axle, for Audi TT A3, etc, to convert to Porsche or Brembo 6-piston ZR18 brake caliper, combined with the R32 334 x 32mm brake discs.These calipers are used as standard for Porsche Cayenne, VW Touareg and Q7. Suitable for the following models of VW/Audi group: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo (9N) Seat Ibiza Seat Leon Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Required components: brake caliper Porsche Cayenne ZR18 ZL18 , référence 95535142153 + 95535142253 brake disc VW Golf 4 R32 334x32mm part number: 8N0 615 301 B / 1J0 615 301 AA Delivery: 2x brake caliper adapters (see pictures) copy of vehicle document to simplify the registration high-strength mounting screws Template to check whether the brake system fits under your rim material certificate You also find the corresponding adapter for conversion to ZR17 6-piston brake calipers in our shop (click here)

€160.71*

VW T3 bus brake conversion Porsche brake caliper rear axle Brake caliper adapter Doka 300x22

Brake caliper adapter, rear axle on all T3 bus models for conversion combined with the Porsche brake calipers. In addition, a handbrake caliper and handbrake cable from the Golf 4 R32 must be installed.The adapters are made of high-strength steel and completely galvanized. The Porsche calipers are connected to the vehicle's hydraulics and can therefore develop enormous braking power. However, since these do not have a handbrake function, the rear Audi S3 or Golf 4 R32 is also used as a handbrake caliper adapter. The hydraulic connection is sealed with a blind plug. Thus, this only serves as a handbrake caliper. On the T3 BUS with ABS, the holders have to be adjusted a little. The fact that the wheel bearing housing has 2 small bulges on the right and left prevents the adapter from being fully seated. To do this, 2 small bevels can simply be sanded. Then the adapter fits perfectly and the distances between the brake caliper and disc fit The adapter is mounted in such a way that the Porsche brake caliper sits towards the front axle and the handbrake caliper towards the rear axle. Advantages: top deceleration the system no longer warms up and no mor thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws For rear discs, the hubs must be modified.(even the ones we have in the range have to be turned off a bit) Required components: brake discs from A4 S4 rear axle 300x22mm , original reference : 8E0 615 601 R brake caliper from Porsche 996 (rear axle) reference: 996.352.422 + 996.352.421 (only 100% fits with the indicated Porsche calipers) brake caliper VW Golf 4 R32 for handbrake function , left VW reference: 8N0615423C, right VW reference: 8N0615424C Matching brake pads hand brake caliper part number: JZW698451 brake caliper support / bracket VW reference 8N0 615 425 B. longer stud bolts for the rear axle Corresponding adapters for the front axle also are available from us! Delivery: 2x brake caliper adapters for VW T3 to Porsche, rear axle 2x matching center rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry

€355.06*

Brake Caliper Adapter Audi S6 Porsche 993 Brake Caliper Audi S4 320x30mm Brake Disc

Brake caliper adapter on Audi S6 C4 model for conversion to Porsche 993 brake calipers, combined with the Audi S4 B5 320x30mm brake discs. Suitable for the following vehicles: Audi S6 C4 A reference number and the EPYTEC logo is engraved on our caliper adapters. Thus, it is possible to register your purchase even for series vehicles, according §21 i.V.m. § 19/2 StVZO (German Road License Legislation). Advantages high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers: Porsche 993 turbo , reference 993 351 426 , Brembo reference 20.5249.00 brake discs: Audi S4 B5 320x30mm , reference 8E0615301AE brake pads: original 993 turbo Delivery: 2x brake caliper adapters for Audi S6 C4 high strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€320.49*

Brake Caliper Adapter VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta ZR17 Brake System Golf 4 R32 334x32

Brake caliper adapter for the Golf 2, 3 series (narrow axle) to be able to drive the Golf 4 R32 brake disc 334x32mm in connection with the Brembo/Porsche Cayenne ZR 17 brake calipers. Suitable for the following vehicles: Golf MK1 (only with G60 wheel bearing housing) VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: brake calipers: Porsche Cayenne or Tuareg, reference 7L6 615 123 T + 7L6 615 124 T brake discs: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A brake pads: from 18 inch calipers reference 7L0 698 151 J Brake disc must be redrill to 4x100 (can also be done in our house) Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance suitable for 17 inch rims components come from the production series of VW thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles including set of mounting screws Delivery: 2x brake caliper adapters for Golf MK1, MK2, MK3, Scirocco Passat Corrado Jetta Polo G60 high strength mounting screws Template to check whether the brake system fits under your rim material certificate The "nose" on the axle pin / stub must be adapted by cutting / grinding it.

€151.39*

VW Golf 1 Caddy Scirocco brake caliper adapter 4 piston Porsche 996 Boxter brake caliper 305x28mm Abarth

Brake caliper adapter for front axle brake system.Allows the installation of brake discs typ Abarth Punto EVO diameter 305x38mm in combination with Porsche 986 4 Piston brake calipers. Tailor-made for the following VW vehicles: Golf 1 Golf 1Cabrio Caddy 14d Jetta 1 Scirocco Advantages: extreme deceleration values also in connection with our rear axle brake system Brake discs with 4x100 bolt circle, so the original Golf 1 bolt circle can be retained. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles. Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems. Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. Required material for installation: brake disc Abarth Punto EVO 305x28 total height 45mm original part no: 51778054 The hub bore must be widened to 65.00mm (can be done in our house for 59€ for the pair of brake discs click here) Porsche brake caliper from 986er Porsche Boxter original part no: 986.351.421 / 422 (only 100% suitable with the specified Porsche calipers) Scope of delivery: Set of brake caliper adapters VW Golf 1 Caddy Scirocco on Porsche brake system matching high-strength screw Certificate of material

€199.09*

Corrado Passat VW Golf 3 VR6 Cupra Bremsanalge 323x28 Brembo caliper adapter

Brake Caliper Adapter for Corrado Golf 2 3 Passat 35i VR6 on the original Cupra R brake system with Brembo 4 piston calipers and the 323x28mm disc brake circle 5x100. The adapters fit all vehicles with VR6 engine and plus axle eg: Golf VR6 Corrado VR6 Passat 35i VR6 Advantages of this brake system: Extreme deceleration values also in connection with our rear axle brake system Due to the material certificate included in the scope of delivery, registration by individual acceptance can also be made possible with production vehicles. Direct fitting to the above mentioned models and therefore easy to restore to their original state at any time Our EPYTEC brake calliper adapters do not require the return of their serial parts, no rewelding - milling or reaming. Required Components: Original 4-piston Brembo brake calipers from the Seat Leon Cupra R(1M1);1.8 T build 02.02-06.06, part number: 1ML615105 and 1ML615106 brake discs 323x28mm parts no: 1ML615301 / 1ML615301 By converting the VR6 steering knuckle (plus axle) also suitable for many other vehicles! 2x brake discs adapter High strength mounting screws material certificate

€189.36*

VW Golf Scirocco Corrado VR6 16V Adapter S3 R32 Brake Brake Caliper

Brake caliper adapter with special wheel hubs to drive the rear brake calipers from Golf 4 V6/R32 Audi S3 8L My.99 in combination with the front 280mm VR6 or G60 brake discs on the rear axle. Suitable for the following VW and Seat models: Golf 1 (only in combination with our Axle Stud -Article No. 313) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Technic: With the use of our wheel hub (available in 4 and 5 holes depending on the model) the 280mm brake discs are centred and bolted on.the track becomes wider by approx. 6-8mm per side. The wheel hubs are identical to the original wheel hubs on the inside, so the original wheel bearings can be used. There are 2 different installation positions of the brake caliper adapter, depending on which brake disc is installed. Advantages of this brake system: Top deceleration values, no comparison to the conventional rear brake discs. a musthave for performance upgrades Material certificate is supplied Low-priced spare parts procurement The material certificate included in the scope of delivery enables registration by individual acceptance even for series production cars. With our EPYTEC wheel hubs the original rear Golf 2 3 wheel bearings can still be driven. Suitable for the front axle we offer caliper adapters for a conversion to the Porsche brake system in connection with the R32 brake disc. Look in our shop. Required components: Brake caliper left VW part number 8N0615423C, Brake caliper right VW part number 8N0615424C, brake caliper holder VW part number 8N0 615 425 B or painted blue from R32: 1J0 615 425 F. Brake disc: if 5 hole is used: Golf 3 VR6 brake disc 280x22mm VW part number 1H0615301A pot depth 29mm if 4 hole is used: Golf 2 G60 brake disc 280x22mm VW part number 535615301 pot depth 40mm Scope of delivery: 2 pieces brake caliper adapter 2 pieces wheel hubs for mounting the brake discs Material certificate Stress analysis / FEM calculation for registration

€223.96*

Details

Brake Caliper Adapter VW T3 Bus Conversion Porsche Brake System

Brake caliper adapter, VW T3 Bus to convert to front 4-piston Porsche Boxter brake caliper, combined with the 312x28mm Mercedes brake disc. Our adapter kit works with or without ABS. Furthermore, the price-performance ratio of the Porsche calipers, as well as the Mercedes discs (the pair allready from 130 € from Zimmerman) is right. Required components: special wheel hubs, front axle (EPYTEC item number 341). A complete kit is available in our shop, item number 276 rims: at least 16 inch brake caliper: Porsche Boxter , reference 996.351.426 + 996.351.425 (only 100% suitable for the mentioned Porsche calipers) brake disc: Mercedes S-Klasse 312x28 , reference 220 421 09 12 rims: at least 16 inch Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see pictures) high-strength mounting screws material certificate Stress analysis / FEM calculation for entry

€174.89*

BMW E36 M3 Brake Caliper Adapter Front Axle Porsche 996 Brake System Brake 345x28

Brake caliper adapter on front axle of BMW E36 M3 for conversion to brake caliper from Porsche 996, combied with the 345x28mm E46 M3 brake dics. Thanks to our adapters, the Porsche calipers are easily installed on the original axle support in place of the original calipers. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 (rear axle) reference 996.352.425 + 996.352.426 brake disc: BMW E46 M3 (front axle) 345x28mm Delivery: 2x brake caliper adapters for BMW E36 M3 high-strength mounting screws material certificate Notes/tips: For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate. For brake conversion on the rear axle, we recommend that you generally proceed as follows: install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren << always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

€312.12*

VW T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter

Brake caliper adapter to convert the T3 BUS to ventilated 312x25 brake discs with Audi A6 calipersAn independent conversion description from one of our customers can be found here: https://schrauberlaube.de/'page_id=25899 Advantages of this brake system: Top deceleration values no more overheating and fading of the brakes Very cheap procurement of the components brake calipers used from 49.- € new brake discs from 70.- € The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Quick and easy assembly possible with the supplied wheel hubs and screws! The wheel hubs supplied retain the standard VW bolt pattern and are identical to the original dimensions. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Required material for installation: Brake discs 312x25 mm Audi A4 quattro, Audi A6 e.g. 4B0 615 301 A Brake calipers Audi 100 / A6 C4 Girling / ATE 57 Part No: 4A0615123A / 4A0615124A (left, right) Brake caliper brackets that were installed with the 288 brake system.(are required because of the shorter design of the holder Part number: 3B0615125 At least 16 inch rims should be used Advice: This adapter is for all T3 buses built after 1986. Yours before 1986 require the >> adapter with article no. 466 << Scope of delivery: 2 high resistant adapter-plates 2x matching centering rings Certificate of material Complete set of high resistant srews 2x wheel hub for installation on front axle. Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities. stress analysis You can find installation instructions from a customer here: https://schrauberlaube.de/'page_id=25899 Here is an installation video from our customer, the steering knuckle is lightly machined as it is built before 1986, nothing needs to be machined on steering knuckles built after 1986, and a different brake caliper is used, hence the light machining:

€252.13*

Golf Corrado VR6 16V Brake calipers adapter R32 S3 TT 1,8T 312x25 334x32

Brake caliper adapter made of high-strength steel alloy for Golf VR6 plus axle to convert to S3 TT 1.8T or R32 brake system Fits for the following models: Passat Corrado Golf 2 3 / GTI 8V / 16V GTI / VR6 or any vehicle with upgraded front axle typ 'plus'. There are 2 possibilities to convert with these adapters! On the 312x25 brake system with the brake caliper, installed in the following vehicles: Golf 4 25 Jahre Jubi GTI/ V5 Golf 4 V6 Audi S3 8L Audi TT 225 PS Or on the large R32 /S3 brake system (brake disc 334x32 with the original double-piston brake caliper from the R32 /S3) installed in the following vehicles: Golf 4 R32 Audi S3 Audi TT Advantages: Easy and fast assembly Significantly better perfomance than the standard brake system. Adaptor does not require rectications on your vehicle,therefore easily transformable in its original condition. The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles The adapters are 6mm thick.For the rear we have to also go right to the HA program Adapteri m S3 saddles in connection with the brake disc 280. This can also be found in our store. Scope of delivery: 2x brake adapter for Golf VR6 plus axle on S3 TT 1.8T R32 and S3 brake 4x longer high strength bolts material certificate

€34.64*

Audi S2 80 90 Brake Caliper Adapter Big Red 993 Brake Calipers 323x30 Audi A8 Brake Disc Tuning Adapter

Brake caliper adapter to mount the Porsche Big Red 993 calipers in conjunction with the large brake discs in 323x30 from the Audi A8 on the Audi S2, Audi 80 / 90, with original 5 x112 or 5x112 bolt circle conversions.The standard Audi bolt circle can be retained. Thus, the complex and costly 5x130 mm Porsche bolt circle conversion is not required. Furthermore, 16 inch rims can be driven with this brake system Required components: Porsche 993 Big Red Brake Calipers Part No: 993.351.425 / 993.351.426 Brake pads part number: 92835194002 Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A Wheel hub from Audi S2 with 5x112 must be installed (also available in our store. Part number: APA185 click here) Important: Our brake caliper adapters only fit with the specified components, please be sure to use them exactly. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly anticorrosiv according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see pictures) suitable high-strength screw set material certificate copy of vehicle documents to simplify the registration Stress analysis / FEM calculation for entry

€184.44*

BMW Z1 E30 Brake Caliper Adapter E34 540i Brake Discs 312x25

Brake caliper adapter on front axle from BMW E30 for conversion to the large brake system from BMW E34 540i, combined with Audi S3 brake discs 312 x 25mm. Required components: brake calipers: BMW E34 540i with support / bracket and brake pads brake discs: Audi S3 (8L) / Golf 4 GTI 312x25mm reference 8N0 615 301 A brake disc PCD habe to be modified to 4x100 (service available from EPYTEC Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) high-strength screw set material certificate Rims: at least 17 inch.

€159.75*

VW Golf 4 Polo 9N VW Polo 6r WRC Bora Audi A3 TT TTRS RS3 Audi TT Brake Caliper Adapter 370x32 Disc

Brake caliper adapter for Golf 4 series, front axle, to install the brake caliper of Cayenne ZR18, combined with the original brake disc of TTRS. Suitable for following vehicles: Audi A3 (8L) Audi TT (8N) VW Golf MK4 VW Bora VW Beetle VW Polo 6R WRC Seat Ibiza Seat Leon As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 8mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. Article APA100 The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake calipers Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253 brake pads: we recommend to use the pads from the ZR 17 brake calipers brake discs TTRS 370x32 mm , reference 8J0615301F (The RS3 disks are not suitable, it is another depth) adapters are suitable only with the original ball joints. modification of the disc PCD from 5x112 to 5x100 (possibility of making it directly from EPYTEC) At least 19 inch rims must be used Delivery: 2x brake caliper adapters 2x spacers under discs high-strength mounting screws copy of vehicle documents material certificate Template to check whether the brake system fits under your rim stress analysis

€196.73*

Audi S6 A6 C5 Passat V8 A8 Brake disc transformation Brake caliper adapter Rear axle brake adapter 310x22

Brake caliper adapter to mount brake discs 310x22mm on the rear axle Audi A8 in connection with the original brake calipers. Suitable for all: Audi A6/ S6 C5 (Type 4B) year of manufacture 1997-2004. VW Passat B5 Type 3B not suitable for the C5 2.7T, 2.7T four-wheel drive, V8 four-wheel drive, or RS6 When converting to the larger A8 brake discs, the braking performance is significantly increased due to the efficiency and better cooling of the brake discs. Another advantage is that the brake discs of the A8 cost almost half compared to the original 269x22 brake discs. Thus, our holders have already paid for themselves after the first brake conversion. With this conversion, 17 inch rims can still be retained. Required components: A8 brake discs 310x22 (ATE No: 24.0122-0212.1) Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. Delivery: 2x brake caliper holder (see picture) high-strength screw material materials certificate

€144.89*

Opel Kadett Calibra Vectra Porsche Brake calipers Adapter Brake system Brake caliper adapter for front axle

Brake caliper adapter for the large Vectra C GTS brake discs 314 x 28mm to be used in conjunction with the Porsche Boxster S and 996 brake calipers (996.351.425 or 426). Can be used without modifications on all Opels with a standard 5x110mm bolt circle such as Omega A B Otherwise with wheel hub conversion to 5x110 bolt circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra can be mounted directly on the strut. low conversion effort for enormous braking power. Advantages: Extreme deceleration values also in connection with our rear axle brake system The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles directly suitable for the above models and can therefore be restored to the original condition at any time without any problems our EPYTEC brake caliper adapters do not require you to send in your serial parts, no re-welding - re-milling or re-drilling. Scope of delivery: material certificate 2x brake caliper adapters for Vectra C discs with Porsche 996 brake calipers high-strength screw material

€207.59*

VW Golf 4 R32 Polo VW Polo 6r WRC Audi S3 adapter brake caliper adapter rear axle 310x22 brake disc

Brake caliper adapter, rear axle, for the models Golf R32 Audi S3 to install the Phaeton brake dics 310x22 mm, combined with the original caliper R32 / S3 Fits the following vehicles (4WD only): VW Golf 4 R32 VW Polo 6R WRC Audi S3 (8L) Audi TT 8N Seat Leon Advantages of this brake system: High deceleration Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: internally vented brake disc 310x22 of VW Phaeton, reference: 3D0 615 601 D (the 5x112 PCD must be modificated to 5x100, what we can do ourselves in our workshops) rear axle brake caliper with bracket from Audi S3 8L or VW Golf R32 Delivery: 2x brake caliper adapters VW Golf 4 R32 Audi S3 2x centering rings for brake discs complete screw kit (10.9) material certificate Stress analysis for the adapter

€147.12*

Seat Ibiza 6L VW Polo 9N Audi A1 Brake Caliper Adapter Porsche Rear Axle 280x21

Brake caliper adapter for rear axle conversion to brake caliper of Golf MK4 V6/R32 Audi S3 8L, YoC 99, combined with the front 280 mm brake discs from Golf MK4. Suitable for the following VW and Seat models Ibiza 6L Polo 9N Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate cheap spare parts thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Required components: brake caliper: VW , reference left 8N0615423C + right 8N0615424C brake caliper support / bracket , reference 8N0615425B brake disc: VW Golf MK4 (front axle) 280x22mm VAG reference 1J0615301E Delivery: 2x brake caliper adapters complete mounting screws set material certificate

€161.56*

BMW performance brake caliper adapter E46 Z4 E85 front axle

Brake caliper adapter for the front axle of BMW E46 and Z4 E85 to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 CSL brake discs.Thanks to our adapters, the BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: Performance 6 piston brake caliper from 135i reference: 34 11 6 786 741 Brake pads from the BMW 135i Part No. 34 11 6 786 044 brake disc from BMW E46 M3 CSL front axle 345x28mm part number: 3411 2 282 445 Delivery: 2x brake caliper adapters for BMW E46 and Z4 E85 matching set of screws material certificate stress analysis for better registration

€177.96*

Audi 100 S4 C4 200 20v Turbo V8 A6 S6 4b VW Passat Rear Brake Caliper Adapter

Brake caliper adapter for original brake calipers in connection with the large 330 x22 brake disc from the S6 4f suitable for all VW/Audi with rear axle brake discs in size 269x22 e.g.: Audi 100 S4 C4 Audi 200 20V Turbo Quattro AUDI A6 TDI AUDI A6 4,2 AUDI A6 Avant AUDI A6 Quattro AUDI S6 V8 Quattro AUDI S6 V8 Avant VW Passat W8 4-Motion VW Passat 2,8 4-Motion VW Passat 2,5 TDI 4-Motion Can also be used in conjunction with all A6 4b and Passat models with small brake discs. There you have to get the ventilated brake calipers of the above models! Required components: Brake calipers Girling 41/43 Teilenummer: 4B0615424 Brake caliper brackets must also be from the calipers that were originally installed with the 269x22 disc Brake discs typ A6 4f 330x22 mm Nr.OE-VAG: 4F0 615 601 B Advantages: Best possible delay values and performance! Also indispensable for performance increases Components come from series production by VW/Audi The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles Scope of delivery: 2 high resistant adapter galvaniced (see photo) suitable screw set high-strength material certificate

€93.38*

%

VW Golf Corrado Passat VR6 3 TTRS RS3 Audi TT Brake Caliper Adapter 334x32

Brake caliper adapters for Corrado Golf MK2 MK3 Passat 35i VR6 ti install the TTRS brake calipers, combined with the original R32 brake discs from Golf MK4 R32 (334x32 mm with 5x100 PCD) Suitable for the following vehicles with VR6 engine and VR6 axle: Golf VR6 Corrado VR6 Passat 35i VR6 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Minimum rim size: from 17 inch. Depending on the type and shape of the rims, the inside minimum diameter may vary. Required components: brake caliper: original TTRS caliper , reference : left 8J0 615 107 + right 8J0 615 108 brake pad: reference 8J0 698 151 E brake disc: Golf MK4 R32 334x32mm , reference : 1J0 615 301AA + 1J0 615 302 A If you have made a conversion to VR6 axle stub , then conform to other vehicles. Delivery: 2x brake caliper adapters (see picture) high strength mounting screws material certificate

€82.75* €169.54* (51.19% saved)

Golf VR6 16V Brake Adapter Brake Caliper Adapter S3 TT 1.8 TPolo 6r WRC 312x25

Brake caliper adapter for Golf MK3 VR6 series with VR6 axle to convert to the large Golf MK4 V6 Jubi brake system. (brake disc 312x25 , brake caliper Golf 4 V6) Suitable for the following vehicles: Golf VR6 Corrado VR6 Passat 35i VR6 Polo 6r WRC Suitable for other vehicles, if the VR6 Plus axle is installed. The 312x25 brake system was installed in the following vehicles: Golf 4 25 Jahre Jubi GTI/ V5 Golf 4 V6 Audi S3 8L Audi TT 225 PS Advantages: easy and quick assembly significantly better braking than the standard braking system can always be restored to the original state without any problems for the rear axle, we also have adapters in our shop to drive with the rear S3 calipers , combined with the 280 brake disc Required components: brake caliper front original S3 /R32 caliper reference: left 1J0615123E , right 1J0615124E brake caliper support / bracket S3 /R32 reference : left 1J0615125B , right 1J0615126 brake pads front original S3 /R32 reference: 8D0698151D brake discs front original 312x25 S3 / R32 reference : left 1J0615301AA , right 1J0615302A The adapter plates have a thickness of 6mm and the hole distance is 90mm from center to center hole. Delivery: 2x brake adapters for Golf VR6 16V to S3 TT 1,8T brake material certificate

€24.99*

Audi A6 C5 S4 8D B5 Brake Caliper Adapter Audi TTRS Brake Caliper Audi A4 Brake Disc 345x30 Brake System

Brake caliper adapter for all VAG models listed below, for conversion to the TTRS brake calipers, combined with the brake discs from the Audi A4 (345x30 bolt circle 5x112), Suitable for the following vehicles: Audi A6 (C5 4B) Audi S4 (8D B5) To use the standard 17 inch Avus rims, the saddle has to be slightly adjusted. With 18 inch rims, the adapters fit Plug & Play. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS, reference left 8J0 615 107 + right 8J0 615 108 brake pad: referenceJ0 698 151 E brake disc: Audi A4 345x30mm, reference 8E0615301K Delivery: 2x brake caliper adaptera (see picture) high-strength mounting screws material certificate

€418.01*

VW Golf 5 6 Auadi A3 TT S3 8P Seat Leon Brake caliper adapter 375x36 Brake disc Mercedes Porsche Panamera Brake caliper

Brake caliper adapter for the front axle on the VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more to the Porsche Panamera 6 piston Brembo brake calipers in conjunction with the brake discs 375x36 from the Mercedes ML / GL 350. Suitable for the following vehicles with steel axle stubs: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 Suitable for all vehicles listed that have a steel steering knuckle (not suitable for vehicles with an aluminium steering knuckle) Advantages of this brake system: extreme deceleration values also in conjunction with our rear axle brake system The material certificate included in the scope of delivery enables registration via individual approval, even for standard vehicles directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling . Required components: Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper must be 82mm, see yellow marking on the last picture) Brake discs from Mercedes Benz ML / GL - class 375x36mm part number: 166 421 0912 The brake pads must be slightly chamfered at the upper edge. Scope of delivery: 2x brake caliper adapter for VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more. High-strength screw material Material certificate Template to check whether the brake system fits under your rim stress analysis

€223.40*

VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Bremssatteladapter 360x32 Scheibe Audi RS4 B5 Brembo 8-Kolben Bremssattel Audi RS5 Bremsanlage

Bremssattel Adapter für die Vorderachse der die VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon uvm. auf die Audi RS4 RS5 8-Kolben Brembo Bremssättel in Verbindung mit den Audi RS4 B5 360x32 mm Bremsscheiben. Die Adapter passen für folgende Fahrzeuge mit Stahlachsschenkel: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Stahlachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Aluachsschenkel)Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör. Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannte Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Audi RS4 RS5 8-Kolben Original Brembo Bremssättel Bremssattel links Teile Nr: 8E0615107 Bremssattel rechts Teile Nr: 8E0615108 Bremsscheibe: Audi RS4 B5 360x32 mm T.-Nr. 8D0615302B oder RS4 B7 Bremsscheibe 365x34mm Teilenummer 8E0615301AB ( wenn die 365 Scheibe verbaut wird, muss an der Bremssattelaufnahme unterlegt werden, damit die Bremsscheibengröße ausgeglichen wird. ) Lieferumfang: 2x Bremssattel Adapter VW Golf 5 6 Audi A3 Baureihe Materialzertifikat hochfestes Schraubenmaterial

€209.87*

Brake Caliper Adapter BMW E30 to E36 M3 Brake Disc 315x28 Brake E38 Brake Caliper

Brake caliper adapter, front axle, for BMW E30 with BMW E36 E46 wheel hub, for conversion to 315x28 E36 M3 brake discs, combined with the brake calipers and brake caliper mounting brackets from BMW E38. Required components:: brake caliper and brake caliper mounting bracket: BMW E38 , reference: left 34111163757, right 34111163758 brake disc: BMW E36 M3 315x28mm , reference 34112227171, 34112227737 conversion kit to 5-hole wheel hub (item n° 126 in our shop;) Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) 2x spacers under discs high-strength mounting screws material certificate Rims: at least 17 inch

€214.12*

BMW E30 325i 320i Brake Caliper Adapter rear Porsche E46 M3 328x20 brake disc

Brake caliper adapter, rear axle, for BMW E30 to install the large E46 M3 brake discs, combined with the 328x20 mm brake caliper of Porsche 996.In this kit, there are two rings in order to adapt the handbrake.Suitable for M3 E30 models without modification. The brake system can also be installed on all other E30 models without problems. It is only necessary to convert on the M3 E30 steering stub axles or wheel hubs. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Rims: at least 16 inch. Required components: brake caliper: Porsche 996, reference 996.352.421 + 996.352.422 the original BMW brake disc must be used, because the handbrake ring could not fit otherwise, since other manufacturers have tolerances in the brake discs brake disc: BMW E46 M3 328x20mm, reference 34212282303 or 34212282304 Delivery: 2x brake caliper adapters for BMW E30 2x O-rings to adapt the handbrake high-strength mounting screws copy of a vehicle document to simplify the registration material certificate

€380.23*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssattel Adapter Bremsanlage 370x34 Audi A3 S3 RS3 8V R8 8 Kolben Bremssattel Tuning Adapter

Bremssattel Adapter für die Vorderachse der Golf 7 8 Audi A3 8V Baureihe auf die 8-Kolben Bremssättel vom R8 in Verbindung mit der Audi RS3 Bremsscheiben ( 370x34 ) Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel) Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannten Modellen und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Bremssättel: Original RS4 B7 / R8 8 Kolben Brembo ( 20767502 ) Bremssättel Bremssattel links Teile Nr: 8E0615107 / 3D0615107A Bremssattel rechts Teile Nr: 8E0615108 / 3D0615108A Bremsscheibe: Audi RS3 370x34 mm T.-Nr. 8V0.615.301.P ( Topftiefe 59,8mm ) Lieferumfang: 2x Bremssattel Adapter Materialzertifikat

€224.32*

Brake Caliper Adapter Audi RS4 B5 Ceramic Brake Disc 420x40 10-piston Brake Caliper RS6 C7 Brake System Tuning Adapter

Brake caliper adapter, front axle, on models Audi RS4 B5, for conversion to the 10-piston brake calipers from the Audi RS6 C7, combined with the ceramic brake discs 420x40mm from Audi RS6 C7. Suitable for the following vehicles: Audi RS4 B5 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS6 C7 10-piston original Akebono Part Number: (4M8615107B / 4M8615108B) brake disc: ceramic Audi RS6 C7 420x40 mm, reference 4G0.615.302.J Delivery: 2x brake caliper adapters for Audi A4 B5 buschings for the 365 disc material certificate stress analysis / FEM calculation for registration high-strength screw material At least 21 inch rims must be used.

€275.04*

Brake Caliper Adapter VW Scirocco Passat EOS Tiguan Audi Q3 TT Seat Wave Brake Disc Audi RS7 356x22 Porsche Cayenne Brake Caliper

Brake caliper adapter, rear axle, on models VW Passat Eos Audi Q3 TT series, for conversion to Porsche Cayenne brake calipers, combined with the Audi RS7 Wave brake discs 356x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Scirocco R is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with aluminum axle (manufacturer reference: 3C0505435F): VW Eos VW Passat VW Scirocco VW Sharan Audi Q3 Audi TT / TT Roadstar Seat Alhambra Skoda Yeti Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear xale, reference 955.352.421 + 955.352.422 / Brembo reference 20.7673.03 + 20.7673.04 brake caliper mounting bracket: for hand brake, Golf 7R, reference 5Q0615424 / 5Q0615424 brake disc: Audi A6 A7 356x22 mm, reference 4H0 615 601 F Delivery: 2x brake caliper adapters, rear axle, for VW Eos, Passat, Scirocco, Sharan, Audi Q3, Audi TT / TT Roadstar, Seat Alhambra, Skoda Yeti high-strength screw material material Ccertificate installation instructions

€318.47*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssattel Adapter Bremsanlage 380x38 Bremsscheibe Audi R8 6 Kolben Bremssattel

Bremssattel Adapter für die Golf 7 8 Audi A3 8V Baureihe Baureihe uvm. auf die 6-Kolben Bremssättel vom R8 in Verbindung mit der Audi R8 Keramik Bremsscheiben 380x38mm Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel)Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör. Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannten Modellen und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Audi R8 6-Kolben Bremssättel Bremssattel links Teile Nr: 420615107A Bremssattel rechts Teile Nr: 420615108A Bremsscheiben Ceramic vom Audi R8 380x38mm, Teilenummer: 420.615.301K Lieferumfang: 2x Bremssattel Adapter für VW Golf 7 8 Audi A3 uvm. mit Aluachse 2x Zentrierringe für VW Golf 4 Audi S3 A3 Cupra R und viele weitere Modelle Materialzertifikat Spannungsanalyse

€222.54*

VW T3 Bus Transporter Conversion to Porsche Brake System Brake Caliper Adapter Wheel Bearing

Brake caliper adapter for conversion to the front 4-piston Porsche Boxter S brake caliper, combined with the der 312x28er brake discs from Mercedes .With this brake conservion to Porsche brake system, the wheel hubs are supplied, which maintain the standard VW pitch circle diameter (PCD) and are identical. Advantages of this brake system are the perfect deceleration values. Rims: at least 16 inch. Required components: brake caliper: Porsche Boxter S, reference 996.351.426 + 996.351.425 brake disc: Mercedes S-Klasse 312x28 , reference WD00604 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters (see picture) 2x wheel hubs 2x wheel bearings for the front axle high strength mounting screws material certificate Stress analysis / FEM calculation for entry

€362.78*

Brake Caliper Adapter Golf MK1 G60 Brake Disc Porsche 986 Brake Caliper

Brake caliper adapter, front axle, for Golf MK1 serie to convert to 4-piston Porsche Boxter 986 brake calipers rear axle, combined with the 280mm G60 brake discs. Suitable for following vehicles: VW Golf MK1 VW Golf MK1 Cabrio Caddy 14d Jeta 1 Scirocco Polo g40 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system 15 inch rims is possible brake disc with 4x100 PCD. Therefore, the original Golf MK1 PCD can be maintained. thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: 986 Porsche Boxter , reference 986.352.421 / 422 (only 100% suitable for the mentioned Porsche calipers) brake disc: VW Golf MK2 / MK3 G60 280x22 , reference: 6KL 615 301 Delivery: 2x brake caliper adapters for VW Golf MK1 Caddy Scirocco to Porsche brake system high-strength mounting screws material certificate

€306.23*

VW Golf MK4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Brake Rear Axle

Brake caliper adapter, rear axle, on all 4WD models Golf MK4 Bora Vento Audi A3, etc, for conversion to Porsche Cayenne caliper, combined with the 310x22 mm VW Phaeton brake discs, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf MK4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Thanks to the plates, the track is 15 mn wider per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora/Jetta mk4 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 brake caliper mounting bracket , rear axle, Audi S3 8L or VW Golf R32 brake disc: 310x22 rear VW Phaeton (PCD of the disc have to be modified to 5x100 - service available from EPYTEC) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R32 / S3 hand brake caliper 2x spacers under the discs 4x flexible braided brake lines high strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€495.68*

Brake / Pitch Bolt Circle Conversion Kit from 4x100 to 5x100 VW Golf MK1 Solid Brake Disc

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to keep the brake system on his first original, but would still like to install 5x100 rims, has found the right kit here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco with solid brake discs on the front axle, 239x10mm. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing etc. (see picture)

€308.31*

Brake / Pitch Bolt Circle Conversion Kit from 4x100 to 5x100 VW Golf MK1 Vented Brake Disc

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to keep the brake system on his first original, but would still like to install 5x100 rims, has found the right kit here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco with solid brake discs on the front axle, 239x10mm. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing etc. (see picture)

€308.31*

Conversion Kit VW Golf MK1 Caddy Jetta 16V Brake System to 5x100 G60 Disc Brake Rear Front

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to convert to the G60 brake system of the Golf MK2 front and rear, but still would like to use 5x100 rims, has found the right set here.This is probably the best alternative to our PCD adapters, because the track does not become wider.Suitable for all Golf MK1 Caddy 14d Jetta and Scirocco. Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle on model Golf MK1, with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing, brake caliper adapter, etc. (see picture)

€410.94*

VW Golf Mk5 MK6 Jetta 3 Audi A3 Seat Leon Skoda Brake Caliper Adapter 356x22 Brake Disc Audi Porsche Panamera Brake Caliper

Brake caliper adapter, rear axle (aluminium axle), om models VW Golf Mk5, Golf Mk6, Audi A3 and more, for conversion to the Porsche Panamera 4-piston Brembo brake calipers, combined with the 356x22mm Audi S6 S7 S8 brake discs. Suitable for the following vehicles with aluminum axles: Audi A3 8P Seat Altea Seat Altea XL Seat Leon Skoda Octavia II Skoda Octavia II Estate VW Golf Plus VW Golf Mk5 VW Golf Mk5 Variant VW Golf Mk6 VW Golf MK6 Variant VW Jetta III VW Touran Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Panamera, rear axle, which was originally installed with a 330x28mm brake disc (Porsche Panamera all 3.0-3.6 and 4.8 S and 4S) brake caliper of the 350mm brake does not fit (pad sticks out the disc) reference: 970.352.425 / 970.352.426 (only 100% suitable with the specified Porsche calipers) Brembo left: 20.A249.05 right: 20.A249.06 rear brake calipers with support for handbrake from Golf Mk4 R32 8N0615423C / 8N0615424C original Audi S6 S7 S8 brake disc 356x22 mm, reference 4H0615601 Delivery: 2x brake caliper adapters for VW Golf Mk5 Mk6 Audi A3 Seat Skoda, and much more. high-strength screw material material certificate

€438.48*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Brake Caliper Adapter 390x36 Brake Disc Mercedes Porsche Panamera Caliper

Brake caliper adapter, front axle, on Golf 7 8 Audi A3 8V etc, for conversion to the Porsche Panamera 6-piston Brembo brake caliper, combined with the brake discs 390x36 Mercedes GL 500. Suitable for the following vehicles: Audi A3 8V Audi A3 Cabriolet 8V7 Audi A3 Sportsback 8YA Cupra Formentor KM7 Cupra Leon KL1 Cupra Leon Sportstourer KL8 Seat Leon Seat Leon Sportstourer KL8 Seat Leon ST 5F8 Skoda Octavia III Skoda Octavia IV Skoda Superb III 3V3 VW Arteon 3H7 VW Golf Sportsvan AM1 VW Golf 7 5G1 VW Golf 8 CD1 VW Passat 3G2 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake caliper: Porsche Cayenne 958 GTS Panamera / brake caliper 390mm brake system reference: 7PP615149J / 7PP615150J (Shaft length from the caliper must be 104mm, see yellow mark on the last picture) brake disc: Mercedes Benz GL - Klasse 390x36mm reference: 166 421 0512 Delivery: 2x brake caliper adapters for Golf 7 8 Audi A3 8V Seat Skoda, etc. high-strength mounting screws material certificate

€223.25*

Conversion Kit VW GOLF MK1 Caddy Jetta 16V Brake System to 5x100 G60 Disc Brake Rear Front

Who wants to finally drive with 5x100 rims, is here just right.Complete conversion kit for front and rear axle to drive with rims PCD / Pitch Circle Diameter 5x100 on Golf MK1.Who would like to convert to the G60 brake system of the Golf MK2 front and rear, but still would like to use 5x100 rims, has found the right set here.This is probably the best alternative to our PCD adapters, because the track does not become wider. Suitable for all: Golf 1 Golf 1 Cabrio Jetta I Scirocco 53B Caddy14d (only in connection with our adapter plates item 597 for the rear axle) Advantages: no PCD adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be pulled (of course depending on the width of the rim) Delivery: complete conversion kit for front and rear axle on model Golf MK1 to drive with rims PCD / Pitch Circle Diameter 5x100 and complete brake system with wheel bearing, brake caliper adapter, etc. , (see picture)

€553.52*

VW Golf Mk4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Rear Axle

Brake caliper adapter, including wheel hubs (5x112), rear axle, on models 4WD Golf Mk4 Bora Vento Audi A3, etc., for conversion to the Porsche Cayenne brake caliper. The conversion is combined with the 330x22 mm brake discs from Audi A6, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf Mk4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With the plates, the track widens by 15mm per side. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora / Jetta MK4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate the rear Cayenne calipers are very cheap to get on the market Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 rear axle brake caliper with mounting bracket from Audi S3 8L or VW Golf R32 brake disc: 330x22 rear from Audi A6 , reference 4F0 615 601 B ( PCD must be modified to 5x100. This service could be done at EPYTEC) Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adapers for R32 / S3 hand brake caliper 2x spacers / spacing plates under brake discs 4x steel braided brake lines high strength mounting screws material certificate Installation instructions (click here)

€534.17*

VW Golf 2 3 Corrado Passat 35i Jetta Brake Caliper Adapter Porsche Cayenne Brake System

Brake caliper adapter for original Seat Leon Cupra R 323er brake discs, combined with 4-piston Porsche Cayenne Brembo calipers. Suitable for all VW with PCD 4x100mm on the front axle: VW Golf MK2 and MK3 Seat Ibiza Cupra R VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Required components: brake caliper: Porsche Cayenne (rear axle), reference 955.352.421 + 955.352.422/ Brembo reference left 20.7673.03 + right 20.7673.04 brake pads: from original calipers 955.352.421 + 955.352.422 brake disc: Seat Leon Cupra R 323x28, reference 1ML 615 301 brake disc PCD must be modified to 4x100, which can also be made in our factory Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance suitable for 17 inch rims components come from the production series of VW registration is possible if correct assembly including set of mounting screws Delivery: 2x brake caliper adapters, galvanized (see picture) set of high-strength mounting screws material certificate Stress analysis

€155.57*

%

VW Golf MK5 MK6 Audi A3 TT R8 Brake Caliper Adapter Porsche Cayenne Rear Axle Front Wheel Drive

Brake caliper adapter, rear axle, on front-wheel drive models Golf MK5 MK6 Audi A3, etc. with steel axle for conversion to Porsche Cayenne brake calipers, combined with the Mercedes ML 350 brake discs 345x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi R8 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with steel axle (front-wheel drive): VW Golf Mk5 VW Golf MK6 Touran Caddy 3 Audi A3 8P Audi S3 8P Seat Leon Cupra Seat Altea Skoda VRS They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne rear axle , reference 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche caliper), Brembo left: 20.7673.03 right: 20.7673.04 rear floating caliper: Audi R8 original brake caliper: 345x22 mm , reference 166 423 0312 Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adaper for R8 hand brake caliper 2x centric rings high strength mounting screws material certificate

€265.26* €393.03* (32.51% saved)

Brake Caliper Adapter T2 YoC 77 Porsche 996 Boxter Caliper Audi A6 Brake Disc

Brake caliper adapter on model T2 bus transporter, front axle, for conversion to internallly vented 312x25mm brake discs, combined with the Porsche Boxter brake calipers. Advantages: top deceleration the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A6 312x25 , reference 3B0 615 301 B brake caliper: Porsche Boxter, reference 996.352.421 + 996.352.422 Delivery: 2x brake caliper adapters high strength mounting screws Rims: at least 17 inch.

€318.58*

VW Golf 4 Polo VW Polo 6r WRC 9N Bora Audi A3 TT Audi RS4 B5 brake system caliper adapter 360x32 5mm spacer

Brake caliper adapter, front axle, for Golf MK4 series (wheel bearing housing with with shorter supporting joint holder) to convert to Cayenne ZR18 brake calipers, combined with the original Audi RS4 B5 brake discs. Suitable for following vehicles with a shorter supporting joint holder: Audi A3 (8L) Audi TT (8N) VW Golf MK 4 VW Bora VW Polo 6r WRC VW Beetle Seat Leon Important!: The adapter is only suitable for cast wishbones OE: 8N0 407 151 A. These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard. We have the right wishbones in the matching accessories and can be ordered directly. The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones. As the TTRS disc could touch the wishbone because of its high height, we have developed spacers of 5mm thickness, which are mounted under the brake disc. The discs are thus pushed outwards. In addition, the disc with the plate is perfectly centered on the axle stub. The spacers are naturally contained in the delivery. Important: These can only be used if the wheel bearing housing is installed with a shorter ball joint mount. This must be checked on the vehicle before installation, otherwise the brake disc will come into contact with the ball joint.Here you can see the difference between the normal and short ball joint.Normal ball jointshort ball joint In addition, the supplied 3mm bushings must be mounted under the brake caliper adapter, since the thinner spacer disc means that the brake caliper has to move 3mm further to the engine side. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 + 95535142253 brake disc: Audi RS4 B5 360x32 mm reference 8D0615302B adapter only fits original supporting joint holder modification of the disc PCD from 5x112 to 5x100 (can also be done from EPYTEC) Delivery: 2x brake caliper adapters 2x 5mm spacers under discs 4x suitable 3mm bushs / bushings under the brake caliper adapter 2x centric rings high-strength mounting screws Template to check whether the brake system fits under your rim material certificate

€213.74*

VW Golf MK4 Bora 1,8T Polo VW Polo 6r WRC Audi A3 Adapter Porsche Cayenne Brake Caliper Rear Axle

Brake caliper adapter, rear axle, in all 4WD Golf MK4 Bora Vento Audi A3, etc. for conversion to Porsche Cayenne brake calipers, combined with the 310x22 mm VW Phaeton brake discs, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Audi S3 or Golf MK4 R32 is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With this adapters, the tracking is wider per side by about 10mm. Suitable for the following VW und Seat models: Audi A3 8L Audi A1 Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf mk4 VW Bora/Jetta mk4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 brake caliper mounting bracket: Audi S3 8L or VW Golf R32, rear brake disc: 310x22 , rear, VW Phaeton the caliper mounting brackets of the hand brake caliper should be slightly filed on the outer edge so that the disc rotates freely Delivery: 2x brake caliper adapters for Porsche caliper 2x brake caliper adapers for R32 / S3 hand brake caliper suitable steel braided brake lines 2x centric rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€554.80*

VW Golf 5 6 Audi A3 TT S3 8P Seat Leon Cayenne ZR17 Brake Caliper Adapter R32 Front Axle

Brake caliper adapter for the front axle on VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more for Brembo/ Porsche 6 -piston Z17 brake caliper, combined with the 330 x 32 mm brake discs. Fits the following vehicles with steel axle stubs: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 The calipers were installed as standard on the Porsche Cayenne, VW Touareg, and Q7. Suitable for vehicles having an axle stub / axle journal made of steel and not of aluminum Required components: brake caliper: Porsche Cayenne or VW Tuareg (17 inch version) , reference 7L6 615 123 T and 7L6 615 124 T brake disc: Mercedes 5x112 PCD 330x32mm, Mercedes reference 164 421 0412 ; 164 421 1312 Advantages of this brake system: top deceleration, without comparison with conventional brake discs components come from the series production of VW registration is possible if correct assembly. including set of mounting screws Is not authorized under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Delivery: 2x brake caliper adapters, completely galvanized (see picture) 2x centering rings for brake discs 4x corresponding bushs complete mounting screws set Template to check whether the brake system fits under your rim material certificate

€144.35*

VW Golf MK5 MK6 Plus Audi A3 Jetta Seat Leon Altea Porsche Panamera Brake Caliper Adapter 375x36 Brake Disc

Brake caliper adapter on Golf VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon for conversion to Porsche Panamera brake calipers, combined with the Mercedes ML 350, 375x36, brake discs. Suitable for following vehicles : Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 They are suitable for vehicles having an axle stub made of steel and not of aluminum.It may be that steering angle limiters for complete steering angle must be installed, these can be found below in the appropriate accessories. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system brake discs are very cheap to buy thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 20.A221.03 (Shaft length from the caliper must be 87mm, see yellow mark on the last picture) brake disc: MERCEDES-BENZ GL-KLASSE 375x36mm reference 166 421 0912 The brake pads must be slightly chamfered at the upper edge. The steel wishbone must be installed. Delivery: 2x brake caliper adapters 2x centric rings high-strength mounting screws material certificate

€230.55*

VW T3 Transporter Brake Caliper Adapter Audi ATE 981 982 Brake System 347x30 Front Axle

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Rims: at least 16 inch Delivery: 2x brake caliper adapters, front axle, VW T3 bus/transporter/van high-strength mounting screws material certificate Installation instructions

€192.36*

VW Polo R WRC Adapter Porsche Cayenne Brake Brake Caliper Rear Axle

Brake caliper adapters, rear axle, on models Polo R WRC, for conversion to the Porsche Cayenne brake system. Combined with the 310x22 mm brake discs from VW Phaeton, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the original brake caliper is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.l. The track is wider by about 10mm per side due to the plates. Adapters are suitable for VW Polo R WRC Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear, reference 955.352.421 + 955.352.422 / reference Brembo 20.7673.03 + 20.7673.04 original calipers from the WRC are used as handbrakes. brake caliper mounting bracket: Golf 4 R32 or Audi S3 8L brake disc: 310x22, rear, VW Phaeton (must be re-drilled to 5x100, can also be done by us.) Delivery: 2x brake caliper adapters for the Porsche caliper 2x brake caliper adapters for the adaption R32 / S3 handbrake caliper 2x spacers under brake discs 2x centering extension rim centering 4x steel braided brake lines high strength mounting screws material certificate

€506.67*

VW Golf MK5 MK6 Audi A3 TT R8 Adapter Porsche Cayenne Brake Brake Caliper Rear FWD

Brake caliper adapter, rear axle, in models Golf MK5 MK6 Audi A3 with steel axl, for conversion to Porsche Cayenne brake caliper, combined with the Golf MK5 R brake disc 310x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. Since these have no handbrake functions, the rear Golf MK5 R is also used as a hand brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models with steel axle (FWD and 4WD): VW Golf MK5 VW Golf MK5R Caddy 3 Touran Audi A3 8P Ausi S3 8P Seat Leon Cupra Seat Altea Skoda VRS They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche caliper) Brembo left 20.7673.03 / right 20.7673.04 rear brake caliper for handbrake: Golf MK5 R brake disc: original Golf 5 R 310x22 mm , reference 1K0 615 601 N In the all-wheel drive models, the ABS sensor must be changed because the Cayenne brake caliper is there Delivery: 2x brake caliper adapers, rear axle, for Golf MK5 MK6 Ausi A3 high-strength mounting screws material certificate Installation instructions (click here)

€194.36*

VW Golf MK 2 3 Corrado Passat Syncro Brake Caliper Adapter Rear R32 S3 V6 Brake Caliper 280mm G60 Brake Disc

Brake caliper adapter, rear axle, on models Golf MK3 Corrado Syncro, for conversion to rear brake caliper from Golf MK4 V6/R32 Audi S3 8L YoC.99, combined with the brake discs, front, 280mm, G60. Suitable for the following models of VW and Seat, with Syncro axles: Golf MK2 Syncro Golf MK3 Syncro Corrado Syncro Passat 35i Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs better fading thanks to the internally vented discs better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop. Required components: brake caliper: VW Golf R32 V6 or S3 VW , reference left 8N0615423C right 8N0615424C brake caliper mounting bracket , reference 8N0615425B brake disc: Golf 2 G60 VW , reference 535 615 301 / important: total height 39,5mm Delivery: 2x brake caliper adapters complete screw kit material certificate

€214.36*

VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Porsche Panamera Brake System Brake Caliper Adapter 390x36

Brake caliper adapter on model Golf MK5 MK6, etc, for conversion to Porsche Panamera brake calipers, combined with the Mercedes ML 63 brake discs 390x36. Suitable for the following vehicles: VW Golf 5 6 Golf Plus Jetta 4 Touran Caddy 3 Audi A3 (8P) Seat Leon (1P1) Seat Altea Seat Altea XL They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system Brake discs are very cheap to buy thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 20.A221.03 (Shaft length from the caliper must be 87mm, see yellow mark on the last picture) brake disc: Mercedes Benz GL - Klasse 390x36mm , reference : 166 421 0512 the brake pads should be slightly filed on the upper edge, beacause they would otherwise be over the structure Tip: On the last product picture, you can see how to measure the shaft length. (highlighted in yellow) Delivery: 2x brake caliper adapters 2x matching centric rings 1x complete set of high-strength screws 1x material certificate

€227.95*

VW Golf MK5 MK6 Brake Caliper Adapter Brake System 370x34 Audi A3 S3 RS3 8V R8 8-piston Brake Caliper

Brake caliper adapter on models Golf MK5 MK6 for conversion to die 8-piston brake caliper of R8, combined with the brake discs of Audi RS3 (370x34 ) Suitable for following vehicles: Golf MK5 MK6 Caddy Touran Audi B5 S4 Audi S1 They are suitable for vehicles having an axle stub made of steel and not of aluminum. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi R8 8-piston original Brembo brake caliper, reference left: 8E0615107 , right 8E0615108 brake disc: Audi RS3 370x34 , reference 8V0.615.301.P (depth 59,8mm) Delivery: 2x brake caliper adapters for VW Golf MK5 MK6 material certificate

€208.49*

Brake Caliper Adapter VW T5 T6 Porsche Panamera 87mm Mercedes Benz Brake Disc 375x36 Front Axle

Brake caliper adapter on model VW T5 and T6 bus/transporter for conversion to the Porsche Panamera 6-piston Brembo calipers, combined with the bracke discs of Mercedes ML 350 375x36.Since the new brake disc is thinner than the originals, it may be that the rim cannot be fitted properly because it is at the disc centering point. In such a case, we recommend simply inserting 3mm universal plates in between to compensate for this. The spacer plates are included in the set, but can also be purchased individually, see below in "Suitable accessories". Suitable for following vehicles: VW T5 BUS / Transporter VW T6 BUS / Transporter Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03) (Shaft length from the caliper must be 87mm, see yellow mark on the last picture) brake disc: Mercedes Benz GL - Klasse 375x36mm , reference 166 421 0912 brake pads must be slightly shaped at the upper edge pitch circle diameter 5x120 and hub bore 76,0 must be modified (service from EPYTEC for 149 € for the pair of brake discs) Depending on the axle, there may be a cast edge around the axle mount. This may have to be removed with a file so that the adapter can be screwed to the axle. Delivery: 2x brake caliper adapters for VW T5 and T6 bus/transporte high-strength mounting screws material certificate Stress analysis / FEM calculation for entry

€214.39*

%

Opel Manta Ascona Kadett Adapter Distanzblech Ersatz für original Hitzebleche Edelstahl

Distanzblech das als Ersatz für original Hitzeblech dienen aus rostfreiem Edelstahl an der Hinterachse passend für Kadett C Manta und Ascona B. Lieferumfang: 1x Distanzblech das als Ersatz für original Hitzeblech dienen, aus rostfreiem Edelstahl

€4.30* €11.37* (62.18% saved)

VW Golf 5 6 GTI Audi A3 TT S3 8P Brake Caliper Adapter Renault Megane RS 4-piston Brake Caliper Tuning Front Axle Tuning Adapter

Brake caliper adapter for conversion to Brembo/ Porsche 4-piston brake caliper from Renault Megane III RS, combined with 345 x 30 mm brake dics from Audi A3 / Golf 5. Suitable for the following vehicles with steel knuckle: AUDI A3/ S3/ Sportback/ Quattro (8P) YoC 2004-2011 AUDI A3 Cabriolet YoC 2008-2011 AUDI S1 SEAT Altea (5P) YoC. 2007-2011 SEAT Leon/ Leon 4 (1P) YoC 2006-2011 SKODA Octavia/ Combi (1Z) YoC 2004-2011 SKODA Superb (3T4) YoC 2008-2011 SKODA Yeti YoC 2010-2011 VW Caddy III (2K) YoC. 2004-2011 VW EOS (1F7) BJ. 2006-2011 VW Golf MK5 (1K)/Variant/ 4Motion /GTI YoC 2004-2008 VW Golf MK6 (5K)/Variant/ 4Motion /GTI YoC 2008-2011 Golf MK6 R VW Golf Plus (5M) YoC 2005-2011 VW Jetta/ Syncro III (1K) YoC 2006-2010 VW Scirocco (137) YoC 2009-2011 VW Tiguan (5N) YoC 2008-2011 VW Touran (1T) YoC 2006-2011 Skoda Karoq (NU7) The brake calipers were installed as standard on the Porsche Cayenne, VW Touareg, and Q7.Fits all listed vehicles that have a steel steering knuckle installed (not suitable for vehicles with aluminum steering knuckle ) Required compoents: Brake calipers Renault Megane III RS Part number: 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R Brake discs Golf 5 6 in 5x112 hole circle 345x30 mm part number VW Audi OE-Nr: 1K0 615 301 AB , 1K0 615 301 M Advantages of this brake system: top deceleration, without comparison with conventional brake discs better engine performance components come from the series production of VW registration is possible if correct assembly. including set of mounting screws Delivery: 2x brake caliper adapters, completely galvanized for Golf MK5 MK6 Audi A3 Seat Leon complete mounting screws set material certificate

€229.48*

BMW E39 5er Brake Caliper Adapter Brembo 6-piston Caliper Mercedes E60 M5 374x36 Brake Disc

Brake caliper adapter, front axle, on models BMW E39for conversion to the larfe Brembo 6-piston caliper from Mercedes Benz W205 C63, combined with the 374x36mm BMW E60 M5 brake disc. Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake disc: BMW E60 M5 mit 374x36 mm, reference 334 11 2 282 806 brake caliper: 6-piston Brembo Mercedes Benz W205 C63, reference A2054216998 Lieferumfang: 2x brake caliper adapters for BMW E39 high-strength mounting screws material certificate

€369.97*

VW Golf MK2 MK3 VR6 Syncro Brake Caliper Adapter 4-piston Porsche Cayenne brake Caliper 310x22 Phaeton Brake Disc

Brake caliper adapter, rear axle, on models Golf 2 3 VR6 Syncro for conversion to the Porsche Cayenne brake calipers, combined with the 310x22 mm brake discs from VW Phaeton, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Golf 4 R32 / Audi S3 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW und Seat models (4WD): VW Golf 2 Syncro VW Golf 3 Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear axle, reference 955.352.421 + 955.352.422 / Brembo referecne: 20.7673.03 brake caliper mountin bracker: Audi S3 8L or VW Golf R32, rear axle brake disc: 310x22 rear VW Phaeton, referecne: 3D0 615 601 D the bolt circle / PCD of the disc have to be modified (service available from EPYTEC) the caliper mounting brackets of the hand brake caliper should be slightly filed on the outer edge so that the disc rotates freely Delivery: 2x brake caliper adapters for Porsche Cayenne caliper 2x brake caliper adapers for Golf 4 R32 / Audi S3 hand brake caliper 2x centric rings high-strength mounting screws material certificate Stress analysis / FEM calculation for entry Installation instructions (click here)

€384.56*

Audi 80 S2 Brake Caliper Adapter ZR18 Cayenne Brake Caliper Audi A6 VW Phaeton 360x34 Brake Disc Conversion Tuning

Brake caliper adapter on model Audi 80 S2 B4 for conversion to the die Porsche or Brembo 6-piston brake caliper ZR18, combined with the Audi A6 or VW Phaeton brake disc 360 x 34mm. The calipers were installed on the Porsche Cayenne, VW Touareg and Q7. Required components: brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253 brake pads: reference 4L0 698 151 A brake disc: VW Phaeton 360x34 mm , reference 3D0 615 301 M The wheel hub of the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Delivery: 2x brake caliper adapters for Audi 80 S2 1x complete set of high-strength screws Template to check whether the brake system fits under your rim 1x material certificate

€160.97*

Mercedes Benz E63 W212 CLS 63 W218 ceramic 402x39mm brake system Mercedes Benz 6-piston brake caliper adapter

Brake calipet adapter, front axle, on models Mercedes Benz E63 W212 and CLS63 W218, for conversion to the Mercedes Benz Ceramic brake discs 402x39, combined with the Mercedes Benz 6-piston W205, W213, C190 brake calipers.zu.Since the original Mercedes brake caliper bracket is not available for purchase individually, but only in conjunction with the 6-piston calipers, we have developed this adapter.. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes W197 SLS W205 C63 AMG 6-piston, reference A204 421 99 98 and A204 421 97 98 or 2124219798 and 2124219998 brake disc: ceramic brake disc from Mercedes CLS 63, 402x39mm, front axle, reference : 231 421 15 12 / 231 421 16 12 Delivery: 2x brake caliper adapters for Mercedes Benz E63 W212 CLS 63 W218 complete screw kit material certificate

€194.31*

Brake Caliper Adapter VW Passat 3B 3BG Brake Disc 269x22 Audi Allroad C5 Brake Caliper Rear Axle Conversion

Brake caliper adapter on model Passat 3BG, rear axle, for conversion to rear brake disc 269x22 mm, combined with the brake calipers of Passat 3BG 4 Motion. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate Required components: brake caliper: 3BG 4 Motion brake caliper, reference VW left 4B0 615 423, right 4B0 615 424 brake caliper mouting bracket: reference 4D0 615 425 B brake disc: 269x22 vom Audi Allroad C5 reference, 4Z7 615 601 Delivery: 2x brake caliper adapters complete screw kit material certificate

€93.77*

Bremssatteladapter VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Audi RS4 R8 8-Kolben Bremssattel 355x32mm Bremsscheibe Opel Insignia

Bremssattel Adapter für Vorderachse der Golf 7 8 Audi A3 8V uwv. auf die 8-Kolben Bremssättel vom Audi R8/RS4/TTRS in Verbindung mit den Opel Insignia OPC Bremsscheiben 355x32mm, Die Adapter passen für folgende Fahrzeuge: Audi A3 8V Audi A3 Cabriolet 8V7 Audi A3 Sportsback 8YA Cupra Formentor KM7 Cupra Leon KL1 Cupra Leon Sportstourer KL8 Seat Leon Seat Leon Sportstourer KL8 Seat Leon ST 5F8 Skoda Octavia III Skoda Octavia IV Skoda Superb III 3V3 VW Arteon 3H7 VW Golf Sportsvan AM1 VW Golf 7 5G1 VW Golf 8 CD1 VW Passat 3G2 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannten Modellen und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Bremssättel: Original RS4 B7 / R8 8 Kolben Brembo (20767502) Bremssättel Bremssattel links Teile Nr: 8E0615107 / 3D0615107A Bremssattel rechts Teile Nr: 8E0615108 / 3D0615108A Bremsscheiben vom Opel Insignia OPC 355x32, Teilenummer: 00569132 Bremsscheibe muss der Lochkreis umgebohrt werden. (Auch bei uns im Haus machbar) Lieferumfang: 2x Bremssattel Adapter für Golf 7 8 Audi A3 8V uwv. Schraubensatz hochfest Materialzertifikat

€302.39*

VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta TTRS RS3 Audi TT brake system brake caliper adapter

Brake caliper adapter on models VW Golf MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, for conversion to the TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 bolt circle/PCD 5x100) Suitable for following vehicles: VW Golf MK2 and MK3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Minimum rim size: from 17 inch rim can be used. Depending on the rim shape and type, the minimum size of the inner diameter can vary Required components: brake caliper: TTRS, reference left 8J0 615 107 + right 8J0 615 108 brake pads: reference 8J0 698 151 E brake disc: Golf MK4 R32 334x32mm, reference 1J0 615 301AA + 1J0 615 302 A Delivery: 2x brake caliper adapters for VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta high strength mounting screws material certificate

€187.73*

Brake Caliper Adapter VW T-Roc Brake Disc Golf Mk7R 310x22 Brake System Brake Caliper Conversion

Brake caliper adapter, rear axle, on model VW T-Roc, for conversion to the 10x22 mm Golf Mk7R brake discs, combined with the VW Golf Mk7R brake calipers. Suitable for: VW T-Roc Advantages of this brake system: extreme delay values thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: internally ventilated 310x22, VW Golf 7R, reference 1K0615601N original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Delivery: 2x brake caliper adapters VW T-Roc complete screw material (10.9) material certificate

€61.13*

Brake Caliper Adapter Opel Astra H TTRS Brake System 370x32 TTRS Brake Caliper Conversion Tuning

Brake caliper adapter on models Opel Astra H series, for conversion to the TTRS brake calipers. combined with the original TTRS brake discs. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original TTRS, reference left8J0 615 107 / right 8J0 615 108 brake pads: set, reference 8J0 698 151 E brake disc: TTRS 370x32 mm, reference 8J0615301F (RS3 discs do not fit, different bell depth) brake discs have to be rebored to 4x110 and hub bores have to be modified to 70mm (can also be done in our house) Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€441.30*

Audi RS4 B5 Brake Caliper Adapter Rear Axle Audi RS5 Brake Disc 330x22 VW T5 T6 Caliper Tuning Adapter

Brake caliper adapter, rear axle, on model Audi RS4, for conversion to the RS5 brake discs 330x22, combined with the rear VW T5 T6 transporter brake calipers. The adapters are suitable to all Audi RS4 models Vorteile dieser Bremsanlage: Only other discs are required, all other components are original, i.e. don't buy expensive components Discs can be obtained cheaply, also directly from us. High deceleration Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: Audi RS5 330x22, reference 8T0.615.601.A brake caliper: T5 T6 transporter, reference7H0 615 423 Brake caliper carrier from the Audi A4 part number: 8K0.615.425.A / 8K0.615.426.A brake pads: reference 4G0615415 Delivery: 2x brake caliper adapters for Audi RS4 high-strength mounting screws material certificate

€342.59*

BMW E30 Brake Caliper Adapter 294x22 Brake Disc Mini Countryman BMW E36 Brake Caliper 5-Hole Conversion

Brake caliper adpater (front axle) on model BMW E30 with the BMW E36 E46 hub, for conversion to 294x22 brake discs from Mini Countryman, combined with the brake caliper from BMW E36/E46 320i-328i.A very good advantage with this brake system is that the original rims can be used. Required component: brake caliper: BMW E36/E46 320i-328i, reference 34 11 1 160 352 right / 34 11 1 160 351 left brake caliper mounting bracket: BMW E36/E46 320i-328i, reference: 34 10 6 758 104 brake disc: 294x22 from Mini Countryman, reference: 34 11 9 804 828 consersion kit to 5-hole hub (item-number 126 in our shop ) the brake caliper mounting bracket has to be modified a little so that it does not interfere with the axle support Advantages of this brake system: high deceleration the original rims can be used thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E36 complete screw kit Stress analysis / FEM calculation for entry material certificate the original rims can be used

€145.50*

Brake Caliper Adapter VW T5 T6 Audi RS6 Ceramic Brake Disc 420x40 Brake Caliper Audi RS6 Front Axle Ceramic Tuning Adapter

Brake caliper adapter, front axle, on models VW T5 and T6 bus / transporter, for conversion to the Audi RS6 brake calipers or 6-piston Brembo brake calipers, combined with the ceramic brake discs 420x40 from Audi RS6.Suitable brake caliper adapters for the rear axle are linked below in the "Crossselling" tab! Suitable for the following vehicles : VW T5 BUS VW T6 BUS Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS6, reference 4G0 615 107 E / 4G0 615 108 E ; Brembo reference: 8404.02-01 brake disc: ceramic Audi RS6 420x40mm, reference: 4G0.615.302.J / 4G0.615.301.J bolt circle/pitch circle diameter and hub bore must be modified Delivery: 2x brake caliper adapters for VW T5 and T6 bus / transporter high-strength mounting screws material certificate

€174.73*

Mercedes Benz GLC GLS AMG Brake System 390x36 AMG Brake Caliper Adapter 6-piston Tuning Adapter

Brake caliper adapter, front axle, on models Mercedes Benz GLC, for conversion Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, reference A2314212698 Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Lieferumfang: 2x brake caliper adapters for Mercedes Benz GLC X253 / C253 high-strength mounting screws material certificate installation instructions

€192.99*

Opel Manta A Ascona Kadett C Adapter Disc Brake Conversion Brake Rear Axle Caliper Tuning Adapter

Adapter for convertion to disc brakes, rear axle, on models Kadett C Manta and Ascona B with the small brake drum. Required components: brake caliper: VW or Audi Girling 38 installed in the Golf, Vento, Passat, Scirocco, Corrado on the rear axle brake caliper mounting bracket: rear Golf Mk2 Mk3, reference 6N0615425/6N0615426 handbrake cable: VW / Audi that the calipers are made of brake disc: Audi 80, size 245 x 10, YoC 86-96, rear axle (used with 4 x 108 bolt circle). The bolt circle must be rebored to 4x100) Adapters are supplied galvanized. Therefore best protection against corrosion according to DIN ISO 9227 Suitable from 13 inch rims Delivery including important spacer plates that replace the original heat plates made of stainless steel Dlivery: 2x adapters for Kadett C Manta and Ascona B with the small brake drum 2x spacer plates for Kadett C Manta and Ascona B with the small brake drum installation instructions material certificate stress analysis / FEM calculation for registration

€164.75*

BMW E30 Brake Caliper Adapter E46 M3 Performance Brake Disc 345x28 Brake 6-piston Brake Caliper Tuning Adapter

Brake caliper adapter, front axle, on models the BMW E30 with the BMW E36 E46 wheel hub, for conversion to the BMW E46 M3 Performance brake system with the 345x28mm brake discs combined with the 6-piston brake calipers. The track is approx. 20mm wider on each side. Advantages of this braking system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW Performance 6-piston 135i, reference 34 11 6 786 741 brake pad: BMW 135i, reference 34 11 6 786 044 brake disc: BMW E46 M3 CSL, front axle, 345x28mm conversion kit to 5-hole wheel hub (item 126 in our shop) Delivery: 2x brake caliper adapters for BMW E30 2x spacers for under the brake disc high-strength screw material material certificate

€428.26*

VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake Caliper 312x25 Front Axle

Brake caliper adapter, front axle, on model T3 transporter for conversion to internally vented 312x25mm brake discs, combined with the Audi A6 calipers. Suitable for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle Advantages: top deceleration the system no longer warms up and no more fading very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A Brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A (left,right) brake caliper mounting brackets that were installed with the 288 brake system (required because of the shorter design of the bracket) wheel hubs to center the brake disc are also available in our shop. since the screwing surface for the adapter is not level, it must be planned before installing the adapter so that the adapter fits properly. At least 16 inch rims should be used so that the diameter of the brake disc fits underneath Hint: This adapter is for all T3 bus before Bj 86 is yours after Bj 86 you need the >> adapter with the article no: 346 << Delivery: 2x brake caliper adapters for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle< matching centering rings set of high-strength screws

€145.54*

VW T3 Transporter Brake Caliper Adapter Audi ATE 981 982 Brake System 347x30 Front Axle

Brake caliper adapter, front axle, on model T3 bus/transporter for conversion to auf internally ventred 347x30mm brake discs, combined with the Audi A6 brake calipers. Wheel hubs are supplied with this brake conversion, which retain the standard VW bolt circle /pitch circle (5x112) and are dimensionally identical. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Advantages: top deceleration the system no longer warms up and no more fading very cheap components. thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws The wheel hubs supplied retain the standard VW bolt circle/pitch circle and are identical to the original dimensions. This means that the wheel bearings can continue to be used and the track is only 6 mm wider on each side. Required components: brake disc: Audi A6 347 x 30 mm, reference 4F0615301G brake caliper mit mounting bracket: ATE 981 + 982 from Audi A6 4F for 347mm disc, manufacture reference 8E0615124B wheel hubs to center around the brake disc are also available in our shop only fitting with the 14 inch axle of the T3 (to determine at the caliper mounting screw, this must have 16mm thread) Delivery: 2x brake caliper adapters, front axle, VW T3 bus / transporter / van high-strength mounting screws material certificate 2 x required wheel hubs matching centering rings

€312.18*

VW Golf MK5 MK6 Audi A3 TT Brake Caliper Adapter Audi RS7 Brake Disc 356x22mm Porsche Cayenne Brake Rear Axle Tuning Adapter

Brake caliper adapter, rear, on models Golf MK5 MK6 Audi A3 (series with steel axle) for conversion to the Porsche Cayenne brake calipers , combined with the Audi RS7 brake discs 356x22 mm. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear floated caliper of Audi R8 is additionally used as handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with steel axle (Front-WD and 4WD): VW Golf MK5 VW Golf MK5R VW Golf MK6 VW Golf MK6R Caddy 3 Touran Audi A3 8P Ausi S3 8P Seat Leon Cupra Seat Altea Skoda VRS Suitable for all vehicles listed that have a steel steering axle stub installed (not suitable for vehicles with aluminum steering steering axle stub) Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: Porsche Cayenne, rear, reference 955.352.421 + 955.352.422 , Brembo left: 20.7673.03 right: 20.7673.04 brake caliper mounting bracket for hand brake: Golf 5 R, rear brake disc: original Audi RS7 356x22 mm , reference 4G8615601 4G8615601E Delivery: 2x brake caliper adapters, rear, for Golf MK5 MK6 Audi A3 2x centering rings high strength mounting screws material certificate installation instructions

€251.81*

Brake Caliper Adapter Audi A6 2,7T A4 quattro 1,8T VW Passat Audi R8 VW Phaeton Brembo 8-piston Caliper 365x34mm Brake Disc Front Axle

Brake caliper adapter, front axle, on models Audi A6 C5 for conversion to Audi R8 / VW Phaeton brake system with the 8-piston Brembo brake caliper, combined with the 365x34mm brake discs. Suitable for the following vehicles: Audi A6 C5 Audi A4 B5 VW Passat B5 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original Audi R8 8-piston, reference 3D 0615 107A / 3D0 615 108A, Brembo reference 20767502 brake disc: Audi R8 365x34mm, reference 8T0615301 Lieferumfang: 2x brake caliper adapters for Audi A6 C5, Audi A4 B5, VW Passat B5 high-strength mounting screws material certificate

€355.79*

Brake Caliper Adapter BMW E92 E93 E91 E90 M3 6-piston Caliper BMW M5 F10 400x36 Brake Disc M5 Brake System

Brake caliper adapter, front axle, on models BMW E92 E93 E91 E90 and many more, for conversion to the BMW M5 F10 6-piston brake calipers, combined with the matching 400x36mm brake discs from the BMW M5 F10. Suitable for the following vehicles: BMW E90 M3 BMW E91 M3 BMW E92 M3 BMW E93 M3 BMW M3 4.0 V8 BMW E82 M 1er Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW M5 F10 6-piston, reference 34117852119, 34117852120 brake disc: BMW M5 F10, front axle, 400x36mm, reference 34112284101, 34112284102 the hub bore of the brake disc must be widened to 79mm (can also be done in-house) Delivery: 2x brake caliper adapters for BMW E92 E93 E91 E90 uvm. complete screw kit material certificate

€189.10*

%

Bremssatteladapter VW T5 T6 Audi RS4 Bremssattel GTR Bremsscheibe 380x34 Vorderachse

Bremssattel Adapter für den VW T5 und T6 BUS auf die Audi RS4 6 Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 380x34 vom Nissan GTR. Die Adapter passen für folgende Fahrzeuge : VW T5 BUS VW T6 BUS Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Original RS4 B7 / R8 8 Kolben Brembo ( 20767502 ) Bremssättel Bremssattel links Teile Nr: 8E0615107 / 3D0615107A Bremssattel rechts Teile Nr: 8E0615108 / 3D0615108A Bremsscheiben vom Nissan GTR 380x34mm Teilenummer: 09.A187.13 Der Lochkreis muss auf 5x120 und die Nabenbohrung 76,0 müssen geändert werden (bei uns im Haus machbar für 149€ für das paar Bremsscheiben) Lieferumfang: 2x Bremssattel Adapter für VW T5 und T6 Bus hochfestes Schraubenmaterial Materialzertifikat

€94.51* €187.37* (49.56% saved)

Brake Caliper Adapter VW T5 T6 Brake Caliper Audi A6 Brake Disc 356x22 Rear Axle Tuning Adapter

Brake caliper adapter, rear axle, on models VW T5 and T6 transporter, for conversion to the brake discs 356x22 Audi A6, combined witht the original brake calipers.Suitable brake caliper adapters for the front axle are linked for you below in the "Crossselling" tab! Suitable for following vehicles: VW T5 transporter VW T6 transporter Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: Audi A6 356x22mm , reference 4H0 615 601 F for the brake discs, the bolt / pitch circle must be changed to 5x120 and the hub bore to 76.0mm (we can do this for by us) Brake calipers from the VW T5 T6 Bus part number: 7H0 615 423 / 7H0 615 424 Brake caliper carrier from the VW T5 T6 Bus part number: 7H0 615 425 we recommend using the brake caliper mounting bracket from TRW. With the original it may be that these have to be adjusted slightly (remove approx. 0.5-1mm from the mounting surface) Part number TRW: BDA585 Delivery: 2x brake caliper adapters for VW T5 and T6 transporter complete screw kit material certificate

€188.71*

VW Golf MK3 Corrado Passat Syncro Adapter Rear R32 S3 V6 Brake Caliper Adsapter 310x22mm Phaeton Brake Disc

Brake caliper adapter, rear axle, on models Golf MK3 Syncro, for conversion to the brake calipers of Golf MK4 V6/R32 Audi S3 8L .YoC 99, combined with the VW Phaeton 310x22mm brake discs. Adapters are suitable for the following VW and Seat models with Syncro axles: Golf MK3 Syncro Corrado Syncro Passat 35i Syncro Vorteile dieser Bremsanlage: top deceleration, without comparison with conventional rear brake discs better fading thanks to internally ventilated discs better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Required components brake caliper: VW Golf R32 V6 or S3, left VW reference 8N0615423C, right VW reference 8N0615424C brake caliper mounting bracket: reference 8N0 615 425 B brake caliper: VW Phaeton 310x22mm, VW reference 3D0 615 601 D modification of the disc circle diameter to 5x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters for Golf 3, Passat, Corrado Syncro high-strength mounting screws installation instructions centering rings

€180.97*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Brake Caliper Adapter 375x36 Brake Disc Mercedes Porsche Panamera Caliper

Brake caliper adapter, front, on series Golf MK7 Audi A3, for conversion to the Panamera 6-piston Brembo brake calipers, combined with the brake discs from Mercedes ML 350 375x36. The adapters fit the following vehicles with alloy steering knuckle: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shaft length from the caliper must be 82mm, see yellow mark on the last picture) brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912 the brake pads should be slightly chamfered on the upper edge Delivery: 2x brake caliper adapters for series Golf MK7 Audi A3 complete screw kit material certificate Stress analysis Template to check whether the brake system fits under your rim Installation instructions

€221.27*

Brake Caliper Adapter BMW 5 F10 F11 Xdrive Brake System 4-piston Brake Caliper BMW G30-31 Brakce Disc 348x36 Tuning Adapter

Brake caliper adapter, front axle, on models 5th, 6th BMW F10, F11, F12 and F13 Xdrive, for conversion to the die BMW G30-31 4-piston brake calipers, combined with the BMW F11 Xdrive 348x36mm brake discs.The BMW M5 4-piston brake calipers are simply screwed onto the original axle mount using our tuning adapter instead of the original caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW G30-31 4-piston Brembo, reference 4116891273 / 34116891274 brake disc: BMW F11 X-Drive , front axle, 348x36mm, reference: 3411 6 785 670 Delivery: 2x brake caliper adapters for 5th, 6th BMW F10, F11, F12 andF13 Xdrive models complete screw kit material certificate

€54.99*

VW Golf 5 6 Audi A3 TT Bremssattel Adapter Audi S6 S7 S8 Bremsscheibe 356x22mm Porsche Panamera Bremse Br

Bremssattel Adapter um die Hinterachse von der Golf 5 6 Audi A3 Baureihe mit Stahlachse auf Porsche Panamera Bremssättel umzubauen. Die Kombination wird in Verbindung mit den Audi S6 S7 S8 Bremsscheiben 356x22 mm verbaut. Die Porschesättel werden an die Hydraulik des Fahrzeuges angeschlossen und können somit eine enorme Bremskraft entfalten. Da diese aber keine Handbremsfunktionen haben, wird zusätzlich der hintere Golf 5 R als Handbremssatteladapter verwendet. Der Hydraulikanschluss wird dabei mit einem Blindstopfen verschlossen. Somit dient dieser nur als Handbremssattel. Adapter sind passend für folgende VW und Seat Modelle mit Stahlachse (Front- und Allrad Antrieb): VW Golf 5 VW Golf 5R VW Golf 6 VW Golf 6R Caddy 3 Touran Audi A3 8P Ausi S3 8P Seat Leon Cupra Seat Altea Skoda VRS Passend bei allen aufgeführeten Fahrzeugen die einen Stahlachsschenkel verbaut haben ( nicht passend bei Fahrzeugen mit Aluachsschenkel ) Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten Ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Benötigte Komponenten: Bremssättel vom Porsche Panamera von der Hinterachse die original mit 330x28mm Bremsscheibe verbaut waren ( Porsche Panamera 3.0 bis 4.8 s und 4S bis 400 PS ) Teile Nr: 970.352.425 / 970.352.426 Bremssattel von der 350mm Bremse passt nicht. ( Bremsbelag würde über die Scheibe raus stehen ) hintere Bremssättel mit Träger für Handbremse vom Golf 5 R original Audi S6 S7 S8 Bremsscheibe 356x22 mm Teilenummer: 4H0615601 gelochte Wave Bremsscheibe vom Audi RS7 356x22 mm Teilenummer: 4G8.615.601 Info: Wenn du eine gelochte Bremsscheibe fahren willst, passt auch die Wave Bremsscheibe vom Audi RS7 mit 356x22mm (Teilenummer: 4G8.615.601), da es die Audi S6 S7 S8 Bremsscheibe nicht gelocht gibt. Die Bremsscheiben sind ansonsten von den Maßen genau identisch. Lieferumfang: 2x Bremssatteladapter für Hinterachse Golf 5 6 Audi A3 uvm. 2x passender Zentrierring hochfestes Befestigungsschraubenmaterial Materialzertifikat

€888.38*

Brake Caliper Adapter VW T2 transporter Mercedes W126 Brake Disc 300x28 Caliper Porsche Boxter Brake System Tuning Adapter

Brake caliper adapter, front axle, on model VW T2 transporter for conversion to the internally vented 300x28mm brake discs from Mercedes Benz W126, combiné with the Porsche Boxter calipers. Advantages: top deceleration the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake disc: Mercedes Benz W126 300x28 reference A 126 421 0412 brake caliper: Porsche Boxter reference: 996.351.425 + 996.351.426 The wheel hub must be modified so that the brake bell of the Mercedes brake disc fits over it. (can also be done in our house) Lieferumfang: 2x brake caliper adapters for VW T2 transporter high-strength mounting screws material certificate At least 16 inch rims should be used.

€189.12*

Bremssatteladapter Audi 100 C4 S4 A6 S6 C4 Audi RS6 Bremssattel 356x22 Wave Bremsscheibe Audi R8 Handbremse Hinterachse

Bremssattel Adapter um die Hinterachse von allen Audi 100 S4 C4 etc. auf die Audi RS6 Bremsanlage umzubauen in Verbindung mit dem Audi R8 Handbressattel. Die Audi RS6 Bremssättel werden an die Hydraulik des Fahrzeuges angeschlossen und können somit eine enorme Bremskraft entfalten. Der Hydraulikanschluss am Audi R8 Bremssattel einfach mit einem Blindstopfen verschließen. Somit dient dieser nur als Handbremssattel. Adapter sind passend für folgende Audi Modelle (Allrad): Audi 100 S4 C4 Audi S6 C4 Audi A6 C4 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten Ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Benötigte Komponenten: Bremssattel original Audi RS6 4G für 22mm starke Bremscheiben, Teilnummer: 4G0 615 403 E Bremssattelträger original Audi RS6 4G für 22mm starke Bremscheiben , Teilenummer: 4G0 615 425 Handbremssattel original Audi R8 Schimmsattel Teilenummer Brembo: 22.8274.03 Wave Bremsscheibe 356x22 hinten vom Audi RS6 Teilenummer: 4G0 615 601 E Lieferumfang: 2x Bremssatteladapter für Audi 100 C4 S4 Baureihe hochfestes Befestigungsschraubenmaterial Materialzertifikat

€475.47*

VW T3 Bus Conversion T4 Brake Disc Rear Axle Brake Caliper Adapter

Brake disc adapter on T3 bus model for conversion to T4 brake disc, rear axle. With these adapters, both T4 brake discs, 280 and 294 , can be mounted with the T4 caliper. Just be careful when buying components: if you want to install, for example, the 280 brake discs, you have to use the original brake calipers and the original brake caliper mounting brackets for the 280 brake discs. Advantages: top deceleration compared to the undersized original brake system the system no longer warms up and no more fading thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Completely new wheel hubs with wheel bolts included Required components: Brake discs from VW BUS T4 280x12 mm 15 inch VAG: 7D0 615 601 or for 16 inch 294x13.5 OE numbers: 7D0615601C Brake caliper bracket from VW BUS T4 280x12 mm 15 inch VAG:7D0615425B or for 16 inch OE number: 7D0615425A Brake caliper from VW BUS T4 15 inch OE numbers: 701 615 424 or for 16 inch OE number: 701 615 424A it must be checked whether longer wheel bolts may have to be used for the rear wheel hub, when using e.g. wheel spacers or the rim thickness. The following brake cable fits without modifications to the vehicle if the sleeve is laid generously at the bottom of the swing arm: Brake cable Golf 2, Jetta 2 1988-1992. Cable 1622 mm/ sheath 1221 mm, vehicles with rear disc brakes (except G60) No.: 191 609 721 Suitable adapters for the front axle also available from us. Delivery: 2x conversion adapters for VW T3 to T4 brake discs, rear axle Set of matching centering rings high-strength mounting screws 2x wheel hubs material certificate

€468.94*

VW Golf Scirocco Corrado G60 VR6 16V Brake Caliper Adapter S3 R32 280x22 Brake Disc Polo 9N Wheel Hub Rear Axle

Brake caliper adapter with special wheel hubs to drive the rear brake calipers from the Golf Mk4 V6 R32 Audi S3 8L, combined with the front 280mm brake discs from the VW Golf Mk4 on the rear axle. Adapters are suitable for the following VW and Seat models: Golf MK1 Golf MK2 MK3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Seat Cordoba Seat Ibiza Seat Toledo Advantages: top deceleration, without comparison with conventional brake discs, rear. only manufacturer components installed better performance supplied material certificate inexpensive procurement of spare parts thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles technology: Using the original Polo 9N wheel hubs, the 280 mm brake discs are centered and screwed. The original wheel bearings from the Polo 9N can still be used. Required components: brake caliper: left VW reference 8N0615423C, roight VW Teilenummer 8N0615424C brake caliper mounting bracket VW reference 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F. stub axle from Polo 6N GTI (also available in our shop, item number APA213) wheel hub from Polo 9N reference: 6Q0598611 brake disc: front disc from Golf 4 280x22 mm reference: 1J0 615 301 E Delivery: 2x brake caliper adapters high-strength mounting screws material certificate

€151.45*

BMW E46 316 328i Brake System Brake Caliper Adapter 4-piston Porsche 996 Brake Caliper 328x20 Brake Disc BMW E46 M3 Tuning Adapter

Brake caliper adapter, rear axle, on models BMW E46, for conversion to the E46 M3 brake discs with 328x20 mm, combined with the brake calipers Porsche 986, 996. Suitable for all E46 (except M models) suitable without modifications. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: rear BMW E46 M3, 328x20mm, reference 34212282303 oder 34212282304 brake caliper: Porsche 986, reference 986.352.421 / 986.352.422, or reference 996.352.421 / 996.352.422 Delivery: 2x brake caliper adapters for den BMW E46 high-strength mounting screws material certificate

€179.91*

Brake caliper adapter Mercedes E55 E63 W211 C219 CLS 55 CLS 63 SL63 SL55 R230 CLS 63 AMG brake system Benz 390x36 brake caliper 6-piston tuning adapter

Brake caliper adapter, front axle, on models Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230, for conversion to the Mercedes Benz GLS AMG brake system 390x36, combined with the 6-piston caliper. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, referecne A2314212698 Brembo reference: 20.A495.04 brake disc:Mercedes GLS 63 AMG (X166), front axle, 390x36mm, reference: A2304211212 Brembo reference Nr: 09.9313.33 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Delivery: 2x brake caliper adapters for Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230 high-strength mounting screws material certificate Static stress analysis / FEM calculation for registration installation instructions

€174.69*

%

Audi S6 C4 Brake Caliper Adapter HP2 Brake System Audi TTRS 8V 8-piston Caliper 370x34 Brake Disc

Brake caliper adapter, front axle, on Audi A6 S6 and Audi 100 serie, for conversion to die Audi TTRS 8V brake system, 370x34mm brake disc and 8-piston Brembo brake caliper. Suitable for all front axles equipped with the HP2 suspension strut / shock absorber Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: original Audi TTRS 8V 8-piston, reference 8V0 615 107 / 8V0 615 108 brake disc: Audi TTRS 8V 370x34 mm, reference 8V0 615 301S Delivery 2x brake caliper adapters high-strength mounting screws material certificate

€145.65* €238.48* (38.93% saved)

BMW E31 E32 E34 Brake Caliper Adapter Brake System BMW F21 F30 F32 370x30 Brake Disc

Brake caliper adapter for the front axle of BMW 31 / 32 / 34, for conversion to the large brake system of BMW F21 / 30 / 32Suitable for all BMW 31 / 32 / 34 that have the spring strut/suspension with part number 31 31 2226166 / 31 31 2226167 installed. Required components: brake caliper: BMW F21 / 30 / 32 4-piston reference: 34116799469 34116799470 Brembo reference: 20.A788.03 / 04 brake disc: BMW F21/30/32 370x30mm, reference 34106797603 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for BMW 31 / 32 / 34 high-strength mounting screws material certificate At least 19 inch rims should be used.

€160.41*

BMW E24 E28 E31 E32 E34 Brake Caliper Adapter Brake System BMW F21 F30 F32 340x30 Brake Disc

Brake caliper adapter for the front axle of the BMW E24 / 28 / 31 / 32 / 34 to mount the large brake system of the BMW F21 / 30 / 32.Suitable for all BMW E24 / 28 / 31 / 32 / 34 that have the spring strut with part number 31 31 2226166 / 31 31 2226167 installed. Required components: BMW F21 / 30 / 32 4-piston brake caliper reference: 34116799465 / 34116799466 (with M logo ) reference: 34116850931 / 34116850932 (gray) Brembo reference: 20.A788.01 / 02 brake disc: BMW F21/30/32 340x30mm reference: 34106797602 Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Delivery: 2x brake caliper adapters for BMW E24 / 28 / 31 / 32 / 34 complete screw kit material certificate At least 17 inch rims should be used.

€160.41*

VW Golf MK7 Touran Audi A3 Q3 Brake Caliper Adapter 360x32 Disc Audi RS4 B5 Brembo 8-piston Brake Caliper Audi RS5 Brake System

Brake caliper adapter, front axle, on models VW Golf MK7 Audi A3 for conversion to the Audi RS4 RS5 8-piston Brembo calipers, combined with the Audi RS4 B5 360x32mm brake discs. Suitable for the following vehicles with aluminum axles: Audi A3 Audi A3 Cabriolet Audi Q2 VW Arteon VW Golf Sportsvan VW Golf MK7 VW Golf 7 Variant VW Passat Variant VW Tiguan VW Touran Seat Ateca Seat Leon Seat Leon ST Skoda Octavia 3 Skoda Octavia 3 estate Skoda Superb 3 Skoda Superb estate 3 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS4 RS5 8-piston original Brembo, reference left 8E0615107 right E0615108 brake disc: Audi RS4 B5 360x32mm, reference 8D0615302B or RS4 B7 365x34mm, reference8E0615301AB (when the 365 discs are installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated) Delivery: 2x brake caliper adapters for VW Golf MK7 Audi A3 series material certificate high-strength mounting screws

€198.40*

Brake Caliper Adapter Audi A3 8V Golf 7R Seat Leon Wave Brake Disc 356x22mm Audi RS6 4G Caliper Tuning Adapter

Brake caliper adapter, rear axle, (aluminum steering knuckle, manufacturer's reference 5Q0505435J ) on models listed below, for conversion to Wave 356x22 mm RS6 4G brake discs, combined with the original brake calipers. Suitable for the following vehicles: Audi A3 8V VW Golf MK7 VW Golf 7R Seat Leon 5F Skoda Octavia III Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling. Required components: brake disc: Wave internally vented ;356x22 vom Audi RS6 4G, reference 4g0615601e original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Delivery: 2x brake caliper adapters VW Golf MK7, VW Golf 7R, Seat Leon 5F, Skoda Octavia 3 matching centering rings high-strength mounting screws material certificate

€179.52*

Brake Caliper Adapter Rear Axle VW T4 Transporter Audi Brake Caliper Audi A4 A5 330x22 Tuning Adapter

Brake caliper adapter, rear axle, on VW T4 transporter, for conversion to brake disc 330x22 Audi A4 A5, combined with the original brake calipers.Matching brake caliper adapters for the front axle are linked for you below in the "Crossselling" tab! Suitable the following vehicles: VW T4 transporter Advantages of this brake system: high deceleration, also in conjunction with our front axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: Audi S4 A4 A5 330x22mm, reference 4H0 615 601 H hub bore has to be modified from 68 to 68.2mm (can be done in our house for 69€ for the pair of brake discs) brake caliper. original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424 brake caliper mounting bracket: original VW T5, reference 7H0 615 425 Here is a conversion report from a customer Delivery: 2x brake caliper adapters for VW T4 transporter high-strength mounting screws Material certificate

€208.00*

Brake Caliper Adapter Front Axle BMW E24 E28 E31 E32 E34 Brake Disc BMW E34 E31 M5 345x32 Audi A8 4N 6-piston Brake Caliper

Brake caliper adapter, front axle, on models BMW E24 / 28 / 31 / 32 / 34, for conversion to the BMW E34 E31 M5 345x32 brake discs, combined with the Audi A8 4N 6-piston brake calipers.Suitable for all BMW E24 / 28 / 31 / 32 / 34 that have installed the shock absorber with part number 31 31 2226166 / 31 31 2226167 (not suitable for M models). Required components: brake caliper: Audi A8 4N 6-piston, reference 4N0 615 105 R / 4N0 615 106 R brake disc: BMW E34 E31 M5 345x32, reference 34112227736 / 34112227735 Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for BMW E24 / 28 / 31 / 32 / 34 high-strength mounting screws material certificate

€371.38*

Audi S2 Avant Limo Audi 80 Brake Caliper Adapter Rear Axle 302x12 Brake Disc Brake Conversion

Brake caliper adapter to mount the Audi A6 brake discs 302x12mm on the rear axle of the Audi S2 Avant, Limo and Audi 80 B4 Quatrro with 5-hole wheel hubs, combined with the original Audi S2 Coupe brake calipers on the rear axle. Required components: brake disc: A6 all-wheel drive brake discs 302x12mm, reference: 24.0112-0176.1 brake caliper: original Audi S2 Coupe , rear axle Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters, rear axle, Audi S2 Avant and Limo and Audi 80 B4 Quattro with 5-hole wheel hubs high-strength mounting screws material certificate

€200.24*

VW Scirocco Passat 3C B6 Audi Q3 TT Brake Caliper Adapter Audi A6 Brake Disc 356x22mm Porsche Panamera Caliper

Brake caliper adapter, rear axle, on models VW Passat 3C B6, Scirocco, Audi Q3, TT series with aluminum axle (manufacturer reference: 3C0 505 435 F) for conversion to the Porsche Panamera brake calipersThe conversion is combined with the 356x22 mm brake discs from Audi A6 4G. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, since these have no handbrake functions, the rear Golf 7R brake caliper is also used as a handbrake caliper. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Adapters are suitable for the following VW and Seat models with aluminum axle 3C0 505 435 F: VW Passat 3C B6 VW Eos VW Scirocco VW Tiguan VW Sharan Audi Q3 Audi TT / TT Roadster Seat Alhambra Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: VW Touareg / Porsche Cayenne, Panamera from the rear axle that was originally installed with 330x28mm brake discs. Reference 7P0.615423 / 7P0.615424 ; reference Porsche: 958.352.423.25 / 958.352.424.25 handbrake calipers with mounting bracket from Golf 7R, reference 8V0 615 424 B / 8V0 615 423 B brake disc: original Audi A6 4G 356x22 mm, reference 4H0615601F the upper screwing point of the anchor plate has to be slightly modified (see picture) perforated wave brake disc from the Audi RS7 356x22 mm, reference 4G8.615.601 Info: If you want to drive with a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (reference: 4G8.615.601) also fits, since the Audi S6 S7 S8 brake disc is not perforated. The brake discs are otherwise exactly identical in terms of dimensions. Delivery: 2x brake caliper adapters for aluminum rear axle VW Passat 3C B6, Scirocco, Audi Q3, TT, etc. 2x centric rings high strength mounting screws material certificate

€335.97*

Bremssatteladapter VW T2 Bus Umbau Bremsanlage Porsche 911 282x24 Bremsscheibe Porsche 4 Kolben Bremssattel Red9design Vorderachse

Bremssattel Adapter um den VW T2B Bus auf der Red9design Vorderachse, auf innenbelüftete Porsche 911 282x24mm Bremsscheiben in Verbindung mit den Porsche Boxter Sätteln umzubauen. Vorteile dieser Bremsanlage sind: Top Verzögerungswerte kein Heislaufen und Fading der Bremse mehr TÜV Eintragung mit mitgeliefertem Materialzertifikat möglich Schnelle und einfache Montage durch mitgelieferte Schrauben möglich! Benötigte Umbaukomponenten: Bremsscheiben vom Porsche 911 282x24 Teilenummer: 911.351.041.22 Radnaben vom Porsche 911 Teilenummer: 911.341.065.06 Radlager können vom T2B übernommen werden, diese sind gleich wie beim Porsche 911 Bremssättel Porsche Boxter Teilenummer: 996.351.421 + 996.351.422 Red9design Vorderachse Lieferumfang: 2x Bremssattel Halter für VW T2 Bus Kompletter Satz hochfeste Schrauben für beide Seiten Materialzertifikat Es sollten mindestens 16 Zoll Felgen gefahren werden.

€263.53*

Audi A80 90 B4 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30mm Audi 4-piston Brake Caliper Tuning Adapter Conversion

Brake caliper adapters, front axle, on models Audi S2 and Audi 80 / 90, for conversion to the 4-piston Brembo brake calipers from Audi S8 D2, combined with the Audi S8 brake discs 345x30mm, with original 5x112 or 5x112 bolt/pitch circle conversion. Required components:: brake caliper: Audi 4-piston Audi S8 D2, reference 4D0615107D | 4D0615108D brake disc: Audi S8 345x30mm, reference 4D0615301B Height: 59.5 mm wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages: significantly better deceleration values than the undersized original brake system high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Delivery: 2x brake caliper adapters for Audi 80, 90, S2, uvm high-strength mounting screws material certificate

€194.27*

Toyota MR2 W3 MRS Brake Caliper Adapter 305x28 Fiat 4-piston Brembo Caliper Alfa Romeo 159 Brera Tuning Adapter Conversion Brake System

Brake caliper adapter, front axle, on Toyota MR2 W3 MRS, for conversion to the Alfa Romeo 159 Brera 4-piston calipers, combined with the Fiat Grande Punto brake discs 305x28 mm. Advantages: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Alfa Romeo 159 Brera 4-piston, reference 20841701 / 20841702 or 51920591 +52020592 brake disc: Fiat Grande Punto 305x28 mm, reference 51778054 Delivery: 2x brake caliper adapters for Toyota MR2 W3 MRS high-strength mounting screws material certificate

€352.30*

Ford Focus RS MK2 Bremssatteladapter Audi TTRS Bremsscheibe 370x32 8-Kolben Bremssattel Audi RS4 B7 Umbau Tuning Adapter

Bremssattel Adapter für alle: Ford Focus RS MK2 Ford Focus RS 500 MK2 Ford Focus ST MK2 in Verbindung mit dem Audi RS4 B7 8 Kolben Bremssattel und der 370x32mm Bremsscheibe vom Audi TTRS. Vorteile dieser Bremsanlage: Extreme Verzögerungswerte Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren Benötigte Komponenten: 8-Kolben Bremssättel vom Audi RS4 B7 Teilenummer, links: 8E0615107 / 3D0615107A, rechts: 8E0615108 / 3D0615108A Bremsscheiben vom Audi TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Lieferumfang: 2x Bremssattel Adapter für Ford Focus RS MK2 passende Zentrierringe komplettes Befestigungsmaterial Materialzertifikat

€440.56*

Brake Caliper Adapter Audi UR Quatrro Audi S4 Brake Disc 320x30 Brake Caliper Audi TTRS 4-piston Brake System Tuning Adapter

Brake caliper adapter on models the Audi UR-Quattro, for conversion to the Audi TTRS / RS3 Brembo 4-piston brake calipers, combined with the Audi 3.2 FSI Quattro 320 x 30mm brake disc.The brake calipers were installed in the Audi TTRS 8J and Audi RS3 8J Suitable for the following vehicles: Audi 2.1 20V Turbo Audi 2.1 Turbo Audi 2.2 20V Turbo Audi 2.2 quattro Audi 2.2 Turbo Required components : brake caliper: l Audi TTRS / RS3 Brembo 4-piston reference 8J0 615 107 / 8J0 615 108 brake disc: Audi 3.2 FSI Quattro 320x30mm, reference 8E0615301AE Wheel hub conversion to 5x112 wheel hub from the Audi S2 Delivery : 2x brake caliper adapters for Audi UR-Quattro high-strength screw material material certificate

€364.18*

VW Golf Scirocco Corrado G60 Adapter Porsche Brake Brake Caliper Rear Axle 280x20

Brake caliper adapters with special wheel hub for vehicles with 5x100 or 4x100 bolt / pitch circle in order to install the rear brake calipers of Porsche 996 and Audi S3 8L /VW Golf 4 R32 , combined with the front 280mm Golf G60 brake discs with a total height of 40mm, on the rear axle.In this case, the S3 R32 calipers have only function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake. Suitable for the following VW und Seat models: Golf 1 (only with our axle pivot - see item 313 in our shop.) Golf 2 3 + GTI+ VR6 Corrado Jetta Passat 35i Scirrocco Vento Polo 6N1 Seat Cordoba Seat Ibiza Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system better performance supplied material certificate Technics: The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 /MK3 bracket. With our supplied wheel hubs, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side.The inside of the wheel hub is manufactured like the originals and therefore the wheel bearing remains the same.Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesFor the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.For vehicles equipped with ABS, the ABS disc of all Golf 3 models can be kept and adjusted exactly on our hub spacers. Required components: brake caliper: Porsche, reference 996.352.421 + 996.352.422 brake caliper: rear axle, Audi S3 8L or VW Golf R32 reference 8N0615423C / 8N0615424C brake caliper mounting bracket: VW Golf R32, reference 8N0615425B brake disc: front, 280mm Golf G60 with a total height of 40mm, reference 535 615 301 Delivery: 2x special wheel hubs with 4x100 bolt pitch circle 2x brake caliper adapters 2x matching centering rings high strength mounting screws material certificate

€509.37*

Toyota Supra JZ80 Brake Caliper Adapter 334x30mm Brake Disc Lexus RC Caliper ZR18 ZL18

Brake caliper adapter, front axle, on models Toyota Supra (platforms JZA80), for conversion to the Porsche or Brembo 6 -piston brake calipers ZR18, combined with the Lexus RC brake discs 334 x 30mm.. The brake calipers were installed in the Porsche Cayenne, VW Touareg and Q7. Required components: brake disc: Audi S4 A4 A5 330x22mm, reference 4H0 615 601 H brake caliper. original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424 brake caliper mounting bracket: original VW T5, reference 7H0 615 425 Delivery: 2x brake caliper adapters for Toyota Supra platforms: JZA80 high-strength mounting screws Material certificatet

€315.67*

Bremssatteladapter BMW 5er F10 F11 Xdrive Bremsanlage 4 Kolben Bremssattel BMW 7er G11 G12 Bremsscheibe 395x36 BMW X3 M X4 M Tuning Adapter

Bremssattel Adapter für die Vorderachse des 5er, 6er BMW F10, F11 Xdrive und allen heckgetriebenen BMW, um die BMW G11, G12 4-Kolben Bremssättel in Verbindung mit den BMW X3 M, X4 M, X5 M, X6 M 395x36mm Bremsscheiben zu fahren.Die BMW G11 und G12 4-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning Adapters an die originale Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW G11, G12 4-Kolben Brembo Bremssättel Teile Nr. 34106891335 / 34106891336 Bremsscheibe vom BMW F95, F96, F97, F98 von der Vorderachse in 395x36mm Teilenummer: 34118054825 Lieferumfang: 2x Bremssattel Adapter für 5er, 6er BMW F10, F11 Xdrive und heckgetriebenen Modellen passender Schraubensatz Materialzertifikat

€62.59*

Brake Caliper Adapter Rear Axle VW T5 T6 transporter Audi Brake Disc Audi A4 A5 330x22 4-piston Porsche Cayenne Caliper Tuning Adapter

Brake caliper adapter, rear axle, on model VW T5 and T6 transporter for conversion to the 330x22 brake discs from Audi A4 A5, combined with the Porsche Cayenne 4-piston calipers and with the original T5 T6 transporter caliper for the handbrake.Matching brake caliper adapters for the front axle are linked for you below in the "Crossselling" tab! Suitable for the following vehicles: VW T5 transporter VW T6 transporter Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: < brake discs: Audi A4 A5 330x22mm, reference 4H0 615 601 H brake caliper: original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424 brake caliper mounting bracket: original VW T5, reference 7H0 615 425 brake caliper: Porsche Cayenne 4-piston Bremssattel, reference 955.352.421 + 955.352.422 / Brembo reference left: 20.7673.03 right: 20.7673.04 for the brake discs, the bolt circle / pitch circel must be changed to 5x120 and the hub bore to 76.0mm (can be done in our house for €149 for the pair of brake discs) Delivery: 2x brake caliper adapters for VW T5 and T6 transporter high-strength mounting screws material certificate

€293.57*

Audi A8 4D Hinterachse Cayenne 4 Kolben Bremssattel Bremssatteladapter 330x22 Bremsscheibe Tuning Adapter

Bremssattel Adapter um die Hinterachse von allen Audi A8 4D etc. auf Porsche Cayenne Bremse umzubauen. Die Kombination wird in Verbindung mit den 330x22 mm Bremsscheiben vom Audi A6 hinten verwendet. Die Porschesättel werden an die Hydraulik des Fahrzeuges angeschlossen und können somit eine enorme Bremskraft entfalten. Da diese aber keine Handbremsfunktionen haben, wird zusätzlich der originale Audi S4 B5 Sattel als Handbremssatteladapter verwendet. Der Hydraulikanschluss wird dabei mit einem Blindstopfen verschlossen. Somit dient dieser nur als Handbremssattel. Adapter sind passend für folgende VW und Seat Modelle (Allrad): Audi A8 4D Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten Perfekt passend zu unseren Bremssatteladapter für die Vorderachse Ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert Benötigte Komponenten: Handbremssattel original Audi S4 B5 für 22mm starke Bremsscheiben, Teilnummer: 8D0 615 424 C, 8D0 615 423 C Bremssattelträger original Audi S4 B5 für 22mm starke Bremsscheiben, Teilenummer: 8D0 615 405 S Bremssättel vom Porsche Cayenne von der Hinterachse Teile Nr: (hintere Zahl unterscheidet Rechten und Linken Sattel) 955.352.421 + 955.352.422 (Nur 100% passend mit den angegebenen Porsche-Sätteln) Brembo Nr:20.7673.03 Bremsscheibe 330x22 hinten vom Audi A6 Teilenummer: 562507JC Lieferumfang: 2x Bremssatteladapter für Porsche Cayenne Sattel 2x Bremssatteladapter für Adaption Handbremssattel hochfestes Befestigungsschraubenmaterial Materialzertifikat

€396.85*

Brake Caliper Adapter Audi 80 B4 Brake Caliper Audi S8 Brake Disc S4 B4 B7 345x30 Rear Wheel Hub Audi A4 B5 Quattro Tuning Adapter

Brake caliper adapter on models Audi 80 B4, for conversion to the Audi S8 4-piston brake calipers, combined with the Audi S4 B7 brake disc 345 x 30mm. Suitable for all Audi 80 models that have the steering knuckle with part number 895257G or J installed. Required components : brake caliper: Audi S8, reference left 4D0 615 107 D / right 4D0 615 108 D brake disc: Audi S4 B76 in 345x30 mm, reference : 8E0 615 301 K wheel hub from the Audi A4 B5 Quattro with 5x112 must be installed, part number: 8D0 501 653B (fits plug&play on the front of the Audi 80) Delivery : 2x brake caliper adapters for for all Audi 80 B4 that have installed the steering knuckle with the part number 895257G or J complete set of high-strength screws material certificate

€425.86*

Audi 80 90 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30 TTRS RS3 Brake Caliper Tuning Adapter

Brake caliper adapter, front axle, on models Audi S2 and Audi 80 / 90, for conversion to the Audi RS3 / TTRS brake calipers, combined with the brake discs 345x30 Audi S8, with original 5x112 bolt / pitch circle or with 5x112 modification. Required components: brake caliper: Audi RS3 / TTRS, reference left 8J0 615 107 / right 8J0 615 108 brake disc: Audi S8 in 345x30, reference: 4D0615301B wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227. Delivery: 2x brake caliper adapters for Audi 80, 90, S2, etc. high-strength mounting screws material certificate

€204.53*

Brake Caliper Adapter BMW E46 M3 Z4 Brake Disc BMW E92 M3 360x30 Alfa Romeo giulia quadrifoglio Brembo 6-piston Brake Caliper

Brake caliper adapter, front axle, on models BMW E46 M3, for conversion to the die Alfa Romeo giulia quadrifoglio Brembo 6-piston calipers, combined with the 360x30mm brake discs BMW E92 M3. Suitable for the following vehicles: BMW E46 M3 Coupe BMW Z4 Roadster M Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Alfa Romeo giulia quadrifoglio Brembo 6-piston Brembo, reference 20C32705 brake disc: BMW E92 M3 360x30mm , reference 2283385 / 2283386 Delivery: 2x brake caliper adapters for BMW E46 M3 and Z4 Radster M high-strength mounting screws material certificate

€178.34*

BMW E36 Brake Caliper Adapter Brake Disc BMW E46 M3 325x28mm Brake Caliper 4-piston BMW E38 Tuning Adapter

Brakec caliper adapter, front axle, on models BMW E36/Z3, for conversion to the BMW E38 4-piston Brembo brake calipers, combined with the 325x28mm E46 M3 brake discs. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW E38 Brembo 4-piston, reference Left 34 11 1 163 757 right 34 11 1 163 758 brake pads: BMW E38 Brembo 4-piston, reference 34 11 6 761 254 brake disc: BMW E46 M3 325x28 mm, reference left 34 11 2 282 801 right 34 11 2 282 802 Delivery: 2x brake caliper adapters for BMW E36 high-strength mounting screws material certificate static stress analysis for the registration

€366.06*

Brake Caliper Adapter Rear Axle VW T5 T6 Transporter Brake Disc Audi A6 356x22 4-piston Porsche Cayenne

Brake caliper adapter, rear axle, on models VW T5 T6 transporter, for conversion to 356x22 Audi A6 brake discs, combined with the Porsche Cayenne 4 -piston brakce caliper and the original T5 T6 brake calipers for the brake for the handbrake. Suitable for following vehicles:: VW T5 transporter VW T6 transporter Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system top deceleration, without comparison with conventional brake discs thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: Audi A6 356x22mm, reference 4H0 615 601 F brake caliper: original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424 brake caliper mounting bracket: original VW T5, reference 7H0 615 425 brake caliper: Porsche Cayenne 4-piston, reference 955.352.421 + 955.352.422 ; Brembo reference 20.7673.03 + 20.7673.04 for the brake discs, the bolt / pitch circle must be changed to 5x120 and the hub bore to 76.0mm (we can do this for 149€ for the pair of brake discs) Delivery: 2x brake caliper adapters for VW T5 and T6 transporter high-strength mounting screws material certificate

€401.31*

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 8-piston Brake Caliper W219 CLS 55 AMG 375x36mm Mercedes GL Brake Disc

Brake caliper adapter, front axle, on models Mercedes W639 Viano , for conversion to the Mercedes W219 CLS 55 AMG 8-piston Brembo brake caliper, combined with the 375x36 brake discs of Mercedes ML / GL 350. Suitable for following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes W219 CLS 55 AMG 8-piston, reference A0034200983 / A003420108 ; Brembo reference 20.7919.01 / 20.7919.02 Brake pads part number: A0034207120 brake disc: Mercedes Benz GL - Klasse 375x36mm, reference 166 421 0912 Delivery: 2x brake caliper adapters for Mercedes W639 Viano high-strength mounting screws material certificate

€176.30*

Brake Caliper Adapter VW Passat 3C YoC 2017 Ceramic Brake Disc 4K0615302D Audi RS5/RS7 Brake Caliper Audi RS5/RS7 B40401-01 1A BMS VW AG

Brake caliper adapter on models VW Passat B6 B7 B8, for conversion to the Audi RS5 / RS7 ceramic brake system. Suitable for the following vehicles with installed wheel bearing housing, reference 3C0 407 253F: VW Passat B6 3C VW Passat B6 Variant 3C5 VW Passat B6 CC VW Passat B7 Variant VW Passat B7 Alltrack VW Passat B8 VW CC B7 VW Sharan Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS7 A7 RS5, reference 4H0615107D / 4H0615106D brake disc: ceramic Audi RS5 400x38mm, reference 4K0615302D Delivery: 2x brake caliper adapters for VW Passat B6 B7 B8 CC Sharan material certificate

€263.47*

Brake Caliper Adapter Mercedes E klasse W124 W201 W202 W208 R170 Porsche 996 Brake Caliper 300x22mm Brake Disc C 43 AMG Tuning Adapter

Brake caliper adapter, rear axle, on models Mercedes W124 260E, for conversion to the Mercedes W202 C 43 AMG brake discs 300x22, combined with the Porsche Boxter 4-piston Brembo brake calipers. Suitable for all vehicles with steering knuckles, reference A2023509508 / A2023509408: Mercedes W124 Mercedes W202 Mercedes W201 Mercedes W208 Mercedes C208 Mercedes A208 Mercedes R170 Advantages of this brake system: thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 996 4-piston, reference 996.352.421 / 422 - 986.352.421 / 422 brake disc: Mercedes W202 C 43 AMG 300x22mm, reference A2104230812 Delivery: 2x brake caliper adapters Mercedes W124, W201, W202, W208, R170, etc. complete set of high-strength screws material certificate

€205.08*

Brake Caliper Adapter Porsche 996 986 Targa Boxter Cayman Gt4 380x34mm Brake Disc Porsche 997 GT3 RS Brembo 6-piston Brake Caliper

Brake caliper adapter on models Porsche 996 986 Targa Boxter, for conversion to the Cayman Gt4 380x34mm brake discs, combined with the Porsche 997 GT3 RS Brembo 6-piston brake calipers. The adapters are suitable for the following vehicles with steering knuckles manufacturer number: 996341157 / 996341155: Porsche 996 Porsche 996 Porsche 986 Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 997 GT3 RS Brembo 6-piston, reference left 99735143192 / right 99735143292 brake disc: Cayman Gt4 380x34mm, reference left 98135140580 / right 98135140680 Delivery: 2x brake caliper adapters for Porsche 996 986 Boxter Targa high-strength mounting screws material certificate

€199.35*

VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake System 312x25 Brake Front Axle

Brake caliper adapter including wheel hub, front axle, on model T3 transporter, for converstion to the internally ventilated 312x25mm brake discs, combined with the Audi A6 calipers. Suitable for VW T3 transporter built before 1986 with M12 screw mount on the axle Advantages of this brake system are: top deceleration system no longer warms up and no more fading very cheap components. you can find second-hand caliper from 49.- € / new from 70.-€ thanks to the material certificate supplied with the order, it is possible to register your purchase quick and easy assembly with the supplied mounting screws Required components: brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A brake disc: Audi A4 quattro, Audi A6 312x25 mm, reference 4B0 615 301 A brake caliper mounting brackets that were installed with the 288 brake system. (required because of the shorter design of the bracket) wheel hubs to center the brake disc are also available in our shop. At least 16 inch rims should be used so that the diameter of the brake disc fits. Delivery: 2x brake caliper adapters for VW T3 transporter before year 1986 with M12 screw mount on the axle matching centering rings including high-strength screw material 2x T3 transporter wheel hubs for the front axle.

€323.72*

VW Golf Mk4 Bora VW Polo 6r WRC 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Rear Axle including Wheel Hubs 5x112

Brake caliper adapter, including wheel hubs (5x112), rear axle, on models 4WD Golf Mk4 Bora Vento Audi A3, etc., for conversion to the Porsche Cayenne brake caliper. The conversion is combined with the 330x22 mm brake discs from Audi A6, rear. The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi S3 or Golf Mk4 R32 is additionally used for a handbrake brake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. With the plates, the track widens by 15mm per side. The wheel hubs for the conversion to 5x112 bolt circle is for the front axle of the Golf Mk4 series, including ABS sensor ring. Suitable for the following VW and Seat models (4WD): Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf Mk4 VW Bora / Jetta Mk4 Polo 6R WRC Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate the rear Cayenne calipers are very cheap to get on the market with the supplied wheel hubs you don't to re-drill the brake disc Required components: brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04 rear axle brake caliper with mounting bracket from Audi S3 8L or VW Golf R32 brake disc: 330x22 rear from Audi A6 , reference 4F0 615 601 B Delivery: 2x wheel hubs 5 x 112 bolt circle with M14x1.5 thread and ABS sensor ring for Golf Mk4 Bora Audi A3 TT TTRS RS3 Audi TT quattro 2x brake caliper adapters for Porsche caliper 2x brake caliper adapers for R32 / S3 hand brake caliper 2x spacers / spacing plates under brake discs 4x steel braided brake lines high strength mounting screws material certificate

€661.76*

Opel Omega B 3.0 2.5 V6 Caravan Brake Caliper Adapter Brake Disc Audi RS6 390x36mm 6-piston Brake Caliper Mercedes SL63 AMG

Brake caliper adapter, front axle, on models Opel Omega B V6, for conversion to the Mercedes Benz GLS AMG 6-piston brake calipers, combined with the Wave brake discs 390x36mm from the Audi RS6 Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, reference A2314212698 / Brembo reference 20.A495.04 brake disc: Wave 390x36mm from Audi RS6, reference 4GO.615.301.E Delivery: 2x brake caliper adapters for Opel Omega B V6 3.0 2.5 Omega B Caravan including high-strength screw material material certificate installation instructions

€358.53*

Brake Caliper Adapter BMW E36 Z3 Porsche Boxter 996 4-piston Brake Caliper Mercedes Brake Disc 330x28 Tuning Adapter

Brake caliper adapter, front axle on models BMW E36 / Z3, for conversion to the 4-piston brake calipers of the Porsche 996, combined with the 330x28mm& brake discs from the Mercedes Benz C-Class (W203). Advantages of this braking system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 series, Porsche original reference 996.351.425/426 (only 100% suitable with the specified Porsche calipers) brake disc: Mercedes Benz 330x28mm W203, reference A2034211312 Hub bore must be adjusted to 79.00 mm and the bolt circle can be re-drilled to 5x120- Available in our house by EPYTEC, click here Delivery: 2x brake caliper adapters for the front axle of the BMW E36 including high-strength screw material material certificate installation instructions

€210.42*

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 6-piston Brake Caliper W219 CLS 55 AMG 390x36mm Mercedes GL Brake Disc

Brake caliper adapter on modles Mercedes W639 Viano, for conversion to the Mercedes W212 AMG 6-piston Brembo brake calipers, combined with the brake discs 390x36 from the Mercedes W205 C63 AMG. Suitable for the following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes W212 W218 AMG 6-piston, reference A2314212698 ; Brembo reference : 20.A495.04 brake disc: Mercedes Benz W205 W213 390x36mm, reference : A2314211812 or Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33 Delivery: 2x brake caliper adapters Mercedes W639 Viano high strength mounting screws material certificate

€229.60*

Brake Caliper Adapter Audi S1 A3 S3 RS3 8V Golf Mk7 Seat Leon Skoda Octavia Brake Disc 356x22 Audi A6 original Brake Caliper

Brake caliper adapter, rear axle (manufacturer reference: 5Q0505435), on the models listed below, for conversion to the brake discs 356x22 mm A6 or RS7, combined with the original brake calipers. Suitable for the following vehicles with aluminum axle, manufacturer reference: 5Q0505435: Audi S1 Quattro Audi A3 8V Quattro Audi S3 8V Quattro Audi RS3 8V Quattro Golf Mk7 Quattro Golf Mk7R Quattro Seat Leon ST Quattro Skoda Octavia 3 Quattro Advantages of this brake system: high deceleration thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake disc: internally ventilated 356x22 Audi A6, reference 4H0 615 601 F / or the perforated Wave brake disc from the Audi RS7 356x22 mm, reférence 4G8.615.601 brake caliper: original Golf Mk7 Audi S3 RS3, reférence 8V0615425B brake pad: original, reférence 8V0 698 151G Info: If you want to drive with a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (reference: 4G8.615.601) also fits, since the Audi S6 S7 S8 brake disc is not perforated. The brake discs are otherwise exactly identical in terms of dimensions. Delivery: 2x brake caliper adapters for VW Golf Mk7, Audi S1, Audi A3, S3, RS3, Seat Leon ST, Skoda Octavia 3, etc. high strength mounting screws centering rings material certificate

€163.21*

Brake Caliper Adapter VW Golf Mk7, 7R Ceramic Brake Conversion Audi R8 356x32

Brake caliper adapter, rear axle, on models VW Golf Mk7, Audi A3, Skoda Octavia 3, Seat Leon series with steel axle (manufacfurer reference: 5Q0 505 436 F), for conversion to the Audi R8 ceramic brake system. The 4-piston Audi R8 calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi R8 is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with steel axle 5Q0505436F VW Golf Mk7 VW A3 Seat Leon 3 Skoda Octavia 3 Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: 4-piston Audi R8, reference 209815 / 42615405 hand brake caliper: Audi R8 Brembo, reference Nr.: 22.8274.03 / TRW reference : 53632 brake disc: original Audi R8 ceramic 356x32 mm, reference : 420.615.602F Delivery: 1x set of brake caliper adapters for steel rear axle VW Golf Mk7, Audi A3, Skoda Octavia, Seat Leon 2x matching centering rings high-strength mounting screw material material certificate

€619.72*

Brake Caliper Adapter VW Passat B8 Alltrack VW Arteon Skoda Supherb Ceramic Brake Conversion Audi R8 356x32 Brake Disc 4-piston Brake Caliper

Brake caliper adapter, the rear axle, on models VW Passat 3G, Arteon, Skoda Superb 3 series with aluminum axle (manufacturer reference: 3Q0 505 436 M), for converstion to the Audi R8 ceramic brake system. The 4-piston Audi R8 calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi R8 is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper. Suitable for the following VW and Seat models with aluminum axle, 3Q0505436M VW Passat 3G VW Passat 3C VW Passat Alltrack VW Arteon Skoda Superb 3 Skoda Supherb 3station wagon Advantages of this brake system: top deceleration, without comparison with conventional brake discs better performance supplied material certificate Required components: brake caliper: 4-piston Audi R8, reference 209815 / 42615405 hand brake caliper: Audi R8 Brembo, reference 22.8274.03 / TRW reference : 53632 brake disc: original Audi R8 ceramic 356x32 mm, reference 420.615.602F Delivery: 1x set of brake caliper adapters for aluminum rear axle VW Passat 3C / 3G B8, Arteon, Skoda Supherb. 2x matching centering rings high-strength mounting screw material material certificate

€605.90*

Audi S4 RS4 A6 Passat W8 Brake Caliper Adapter 4-piston Brake Caliper Ceramic Brake Disc 356x32mm Audi R8

Brake caliper adapter, front axle, on models Audi S4 B5, for conversion to the 4-piston Audi ceramic brake calipers from the Audi R8, combined with the original Audi R8 ceramic brake discs 356x32. Suitable for the following vehicles with wheel bearing housing 4B3 407 258 A / 257 A: Audi A4 (8D5, B5) Audi S4 (8D5, B5) Audi RS4 RS5 B5 Quattro station wagon Audi A6 ( 4B C5 ) VW Passat W8 ( 3B3 ) VW Passat Variant ( 3B6, B5 ) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: 4-piston Audi R8, reference 209815 / 42615405 brake disc: original Audi R8 ceramic 356x32 mm, reference 420.615.602F Delivery: 2x brake caliper adapters for Audi S4, RS4, A6, VW Passat W8 high-strength screw material material certificate

€216.77*

Brake Caliper Adapter Audi TT TTS TTRS 8J 6-piston Brake Caliper Porsche 991 911 370x32mm Audi TTRS Brake Disc

Brake caliper adapter, front axle, on models Audi TT, TTS, TTRS 8j series, for conversion to th the 6-piston Porsche 991 brake calipers, combined with the original Audi TTRS brake discs 370x32mm. Suitable for the following vehicles with aluminum axle 8J0407257D: Audi TT (8j) Audi TTS (8j) Audi TTRS (8j) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Porsche 991 911 6-piston, reference 991.351.423 / 991.351.424 brake pad: reference 991.351.949.02 brake disc: Audi TTRS 370x32 mm, reference 8J0615301F (RS3 discs do not fit, other bell depth) Delivery: 2x brake caliper adapters for the Audi TT 8j series high-strength mounting screws material certificate

€217.39*

BMW E36 M3 Z3 M3 Brake Caliper Adapter 996 GT3 6-piston Brake Caliper 360x30mm Brake Disc BMW E92 Tuning Adapter

Brake caliper adapter, front axle, on models BMW E36 M3 and Z3 M3, for conversion to the Porsche 996 GT3 6-piston brake caliper, combined with the 360x30mm brake disc from the BMW E92 M3. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Porsche 996 GT3 6-piston, reference: 996.351.432 and 996.351.431 brake disc: BMW E92 M3 360x30mm, reference 2283385 / 2283386 / 34112283386 / 34112283385 Delivery: 2x brake caliper adapters for BMW E36 M3 and Z3 M3 6mm spacer between wheel hub and brake disc high-strength mounting screw material material certificate stress analysis / FEM calculation for registration

€281.66*

VW Golf Mk3 Corrado VR6 Brake Caliper Adapter Golf Mk4 V6 Audi S3 Brake 312x25mm 4-piston 996 Porsche Brake Caliper

Brake caliper adapter, front axle, for conversion to the brake calipers from the Porsche 996, combined with the 312x25mm brake disc from the Audi S3/Golf 4 V6. Suitable for all vehicles with VR6 Plusaxle: VW Golf Mk3 2.0l 16V and VR6 GTI VW Passat 2.0l 16V 35i and VR6 GTI VW Corrado 2.0l 16V and VR6 GTI Seat Toledo Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components : brake caliper: Porsche 996, reference 996.351.422 + 996.351.421 / 986.351.421 + 986.351.422 (Nur 100% passend mit den angegebenen Porschesätteln) (only 100% suitable with the specified Porsche calipers) brake disc: Audi S3 (8L) /Golf Mk4 GTI 312x25 mm, reference 8N0 615 301 A Delivery: 2x brake caliper adapters for VW Golf Mk3 VR6, Passat VR6, Corrado VR6, Seat Toledo complete high-strength screw material material certificate

€208.49*

Brake caliper adapter BMW 1 series 2 series 3 series 4 series F20 F21 F22 F23 F30 F31 F32 F33 F34 F36 convertible coupe BMW M2 M3 380x30 brake disc 4 piston brake caliper tuning adapter

Brake caliper adapter, front axle, on models series 1, 2 BMW F20, F21, F22 and F23, as well as the 3 and 4 series F30, F31, F32, F33, F34, F36 for conversion to the BMW F20 M 4-piston brake calipers, combined with the 380x30mm BMW M2 M3 M4 brake discs to drive.The BMW F20 M 4-piston brake calipers are simply screwed to the original axle mounting support instead of the original caliper using our tuning adapter. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: BMW F20 M 4-piston, reference left 34116799465 / right 34116799466 brake disc: BMW M2 M3 M4, front axle, 380x30mm, reference left 34112284809 / right 34112284810 Brake pad: reference 34112284969 Delivery: 2x brake caliper adapters for series 1, 2 BMW F20, F21, F22 and F23 high-strength mounting screw material material certificate Stress analysis / FEM calculation for registration car registration certificate

€161.21*

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 6-piston Brake Caliper W205 C63 AMG 390x36mm Brake Disc Mercedes ML 63 W166

Brake caliper adapter, front axle, on models Mercedes W639 Viano, for conversion to the Mercedes C63 AMG W205 6-piston Brembo brake calipers, combined with the 390x36 brake discs from the Mercedes ML 63 W166. Suitable for the following vehicles: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Mercedes C63 AMG W205 6-piston, reference 2054216998 / 2054217098 brake disc: Mercedes Benz ML 63 W166 - Klasse 390x36mm, reference A1664210512 Delivery: 2x brake caliper adapters Mercedes W639 Viano Vito high-strength screw material material certificate

€197.67*

Mercedes Benz C63 W205 W212 Bremsanlage 390x36 AMG Bremssattel Adapter 6-Kolben

Bremssattel Adapter für die Vorderachse des Mercedes Benz C63 W205 und W212 E63 AMG um die Mercedes CLS63 AMG Bremsscheibe 390x36 in Verbindung mit den original verbauten Mercedes 6-Kolben Bremssättel zu fahren.Der Adapter passt mit beiden originalen Bremssätteln, welche beim Fahrzeug verbaut worden sind. Bis zum Baujahr 08/2017 wurde der Akebonobremssattel verbaut, ab dem Baujahr 09/2017 wurde dann standardmäßig der Brembobremssatttel des C 63 AMG (205) verbaut.Endlich ein Adapter um von der original 360mm auf die 390mm Bremsscheibe vom AMG upgraden zu können. Da man die originalen Halter nicht einzeln bekommt, sind diese extrem teuer. Mit unserem Adapterkit kannst du die 390mm Scheibe Plug and Play verbauen. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes C 63 AMG (W205) 6-Kolben Bremssättel Teile Nr. A2044219998 / A204 421 97 98 ( Brembo: 20828205 / 20828206 ) Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 390x36mm Teilenummer: A2304211212 Bremsscheibe vom Mercedes AMG C63 S (S205) von der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz W205 C63 W212 inklusive hochfestes Schraubenmaterial Materialzertifikat Einbauanleitung

€147.27*

VW T3 Bus Allrad Syncro 16 inch conversion Porsche brake system brake caliper adapter 307x24 brake disc

Brake caliper adapter for the T3 Syncro with 16 inch axle to fit the 4-piston Porsche 996 brake calipers in conjunction with the 307x24 brake disc from the BMW Mini Countyman on the front axle. The advantages of this brake system are the perfect deceleration values. Furthermore, the price-performance ratio of the Porsche brake calipers and the brake discs is right. Required components: Rear Porsche 996 brake callipers Porsche part number 996.352.421 + 996.352.422 Brake discs BMW Mini Countryman 307x24 OE numbers: 34116799351 Click here for the matching adapter for the 14 inch axle (click here) Advantages: The remaining fading on the original brake system is gone. Significantly better perfomance than the standard brake system. Our adaptors do require only small rectifications on your vehicle.Therefore easily transformable in its original condition The registration for public road use should be no problem with correct and complete execution of the work. Scope of delivery: 2x brake caliper bracket for the VW T3 Bus Syncro with 16 inch axle Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities) High resistant screws for fixation Stress analysis

€204.69*

Bremssatteladapter BMW E38 740i 730d 750i 374x36mm Bremsscheibe BMW M5 E60 6 Kolben Bremssattel Mercedes GLE 63

Bremssatteladapter für den BMW E38 auf die Mercedes GLE 63 6-Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 374x36mm vom BMW M5 E60 Die Adapter sind passend für alle BMW 7er E38 mit Radlagergehäuse OE: 31211142085 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Mercedes GLE63 6-Kolben Brembo - Bremssättel Teilenummer: A1664214098 rechts und A1664214198 links Bremsscheiben 374x36mm vom BMW M5 E60, Teilenummer: 34112282805 links ; 34112282806 rechts Lieferumfang: 2x Bremssatteladapter für alle BMW 7er E38 mit Radlagergehäuse OE: 31211142085 hochfestes Schraubenmaterial Materialzertifikat

€218.84*

Bremssatteladapter BMW E38 740i 730d 750i 370x24mm Bremsscheibe BMW M5 E60 4 Kolben Bremssattel Mercedes GLE 63

Bremssatteladapter für den BMW E38 auf die Porsche Cayenne 4-Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 370x24mm vom BMW M5 E60 Die Adapter sind passend für alle BMW 7er E38 mit dem Radlagergehäuse OE: 33321090747 Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Porsche Cayenne 4-Kolben Brembo - Bremssättel Teilenummer: 7P0.615.423 rechts ; 7P0.615.424 links Bremsbeläge, Teilenummer: 7P0698451 Bremsscheiben 370x24mm vom BMW M5 E60, Teilenummer: 34212282807 links ; 34212282808 rechts Lieferumfang: 2x Bremssatteladapter für alle BMW 7er E38 mit Radlagergehäuse OE: 33321090747 hochfestes Schraubenmaterial Materialzertifikat

€189.82*

Bremssatteladapter Mercedes E55 E63 W211 C219 SL63 SL55 R230 CLS 63 AMG Bremsanlage 8 Kolben Bremssattel

Bremssattel Adapter für die Vorderachse des Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230, um die Mercedes Benz GLS 63 Bremsscheibe 390x36mm mit dem 8-Kolben Bremssattel vom Mercedes SL55 AMG zu fahren. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes SL55 AMG 8-Kolben Bremssättel Teilenummer: A0034203283 / Brembo Nr: 20.7919.02 Bremsscheibe vom: Mercedes GLS 63 AMG (X166) von der Vorderachse in 390x36mm Teilenummer: A2304211212 Brembo Nr: 09.9313.33 oder Mercedes AMG C63 S (S205) von der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230 inklusive hochfestes Schraubenmaterial Materialzertifikat

€231.00*

Mercedes Benz W213 S213 E220 Bremsanlage 390x36 AMG Bremssattel Adapter 6-Kolben AMG Tuning Adapter

Bremssattel Adapter für die Vorderachse vom Mercedes Benz E-Klasse W213 / S213 ( Radlagergehäuse : OE: 2133324700 ) um die Mercedes Benz C63 W204 AMG Bremsscheibe 390x36 in Verbindung mit den Mercedes Benz 6-Kolben Bremssättel zu fahren.Endlich ein Adapter um auf die 390mm Bremsscheibe vom AMG upgraden zu können. Da man die originalen Halter nicht einzeln bekommt, sind diese extrem teuer. Mit unserem Adapterkit kannst du die 390mm Scheibe Plug and Play verbauen. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Mercedes CLS 63 AMG (C218) 6-Kolben Bremssättel Teile Nr. A2044214798 und A2044214898, Bremsbo Teilenummer: 20.A495.04 Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 390x36mm Teilenummer: A2304211212 Bremsscheibe vom Mercedes AMG C63 S (S205) von der der Vorderachse in 390x36mm Teilenummer: A2314211812 Lieferumfang: 2x Bremssattel Adapter für Mercedes Benz W213 / S213 inklusive hochfestes Schraubenmaterial Materialzertifikat

€231.00*

Bremssatteladapter Ford Capri Escort Wilwood Dynalite Bremssattel Bremsscheibe 245x20 Bremsanlage

Bremssatteladapter für die Vorderachse um die original Capri 2,8i Bremsscheibe 245x20mm in Verbindung mit dem Wilwood Dynalite Bremssattel fahren zu können Passend an folgenden Fahrzeugen: Ford Capri Mk1 ausser 3.0 V6 Ford Capri Mk2 ausser 3.0 V6 Ford Capri Mk3 ausser 3.0 V6 Ford Escort Mk1 Twin Cam Ford Escort Mk1 Mexico Ford Escort Mk1 RS1600 Ford Escort Mk1 RS2000 Ford Escort Mk2 RS Mexico Ford Escort Mk2 RS1800 Ford Escort Mk2 RS2000 Vorteile: Extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage Durch das im Lieferumfang enthaltene Material Zertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an oben genannte Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von deinen Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Bremsscheiben vom Ford Capri 2,8i 245x20, Teilenummer: 1595647 Wilwood Dynalite Bremssättel, Teilenummer: 120-6806 Lieferumfang: 2x Bremssatteladapter für Ford Capri 1, 2 und 3 sowie Escort 1, 2 RS 2000 RS1600 Materialzertifikat

€137.17*

Mercedes Benz C63 W204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston

Brake caliper adapter on Mercedes Benz C63 W204, front axle, for conversion to the Mercedes Benz C63 W204 AMG brake discs, 390x36, combined with the Mercedes Benz 6-piston brake calipers.At last an adapter to upgrade from the original 360mm to the 390mm disc of the AMG. Since you do not get the original brackets individually, they are extremely expensive.. With our adapter kit you can install the 390mm disc Plug and Play. Advantages of this brake system: top deceleration, without comparison with conventional brake discs easy assembly better performance supplied material certificate can easily be restored to the original state Required components: brake caliper: Mercedes CLS 63 AMG (C218) 6-piston, reference A1974212698 brake disc: Mercedes CLS 63 , front axle, 390x36mm, reference A2304211212 Brake disc from Mercedes AMG C63 S (S205) from the front axle in 390x36mm Part Number: A2314211812 Delivery: 2x brake caliper adapters for Mercedes Benz W204 C63 high-strength screw material material certificate installation instructions

€214.97*

Bremssatteladapter Mercedes W639 W447 Vito Viano 6-Kolben Bremssattel W205 C63 AMG 360x36mm Bremsscheibe Mercedes W212 E-Klasse

Bremssatteladapter für den Mercedes W639 Viano auf die Mercedes C63 AMG W205 6-Kolben Brembo Bremssättel in Verbindung mit den Bremsscheiben 360x36 vom Mercedes W212 E-Klasse. Die Adapter passen für folgende Fahrzeuge: Mercedes W639 Viano / Vito Mercedes W447 Viano / Vito Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Mercedes C63 AMG W205 6-Kolben Bremssättel Teilenummer: 2054216998 / 2054217098 / A2054216798 / A2054216798 / 2054210400 / 2054210300 Bremsbeläge Teilenummer: A0004209400 Bremsscheiben vom Mercedes Benz W212 E-Klasse 360x36mm Teilenummer: A2044211212 Lieferumfang: 2x Bremssatteladapter Mercedes W639 Viano Vito hochfestes Schraubenmaterial Materialzertifikat

€214.47*

Brake caliper adapter OPEL Astra G OPC I OPC II Zafira A Porsche Cayenne ZR18 ZL18 Brake 360x32 Brake disc Mercedes CLK

Brembo brake caliper adapter to be able to use the Porsche Cayenne ZR18 / ZL18 6-piston brake caliper in conjunction with the Mercedes CLK 360x32mm brake discs on the front axle of the Opel Astra G OPC. The adapters fit the following vehicles with wheel bearing housing part number: 5308012 / 5308013 : Opel Astra G CC Opel Astra G Caravan Opel Astra G Limousine Opel Zafira A Opel Astra G Coupe Opel Astra G Cabrio Advantages: Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for series vehicles Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling. Required components: Brake calipers Porsche Cayenne ZR18 ZL18 part no. 95535142153 / 95535142253 Brake discs from Mercedes CLK 361x32 mm part number 2094210112 Brake disc must be rebored to 5x110 and the hub diameter must be turned up to 70mm (can also be done in-house) the brake pads must be machined approx. 4mm on the outer edge, otherwise they will protrude beyond the brake disc. Scope of delivery: 2 x brake caliper adapters for the Opel Astra G CC, Caravan, Saloon, Coupe, Convertible, Zafira A Set of high-strength bolts Template to check whether the brake system fits under your wheel rim Material certificate The minimum tyre size must be 19 inches.

€222.46*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon SkodaBremsscheibe 370x34mm Audi RS3 8-Kolben Bremssattel Tuning Adapter

Bremssattel Adapter für die Vorderachse der Golf 7 8 Audi A3 8V Baureihe uvm. auf die Audi RS 8-Kolben Brembo Bremssättel in Verbindung mit den Bremsscheiben 370x34 vom Audi RS3 8V. Die Adapter passen für folgende Fahrzeuge mit Alu Radlagergehäuse OE: 5Q0 407 253A : Audi A3 8V Audi A3 Cabriolet 8V7 Audi A3 Sportsback 8YA Cupra Formentor KM7 Cupra Leon KL1 Cupra Leon Sportstourer KL8 Seat Leon Seat Leon Sportstourer KL8 Seat Leon ST 5F8 Skoda Octavia III Skoda Octavia IV Skoda Superb III 3V3 VW Arteon 3H7 VW Golf Sportsvan AM1 VW Golf 7 5G1 VW Golf 8 CD1 VW Passat 3G2 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Audi RS 8-Kolben Brembo Bremssättel Teilenummer: 8T0615107D / 8T0615108D, Brembo Teilenummer: 20.7675.02 Bremsscheiben vom Audi RS3 8V 370x34mm Teilenummer: 8V0.615.301R Lieferumfang: 2x Bremssattel Adapter für VW Golf 7 8 Audi A3 8V Seat Skoda, uvm. hochfestes Schraubenmaterial Materialzertifikat

€310.29*

Bremssatteladapter Opel Vectra C OPC Caravan Bremsscheibe 345x30mm Renault Megane RS 4 Kolben Bremssattel Brembo Tuning Adapter

Bremssatteladapter für Brembo 4 - Kolben Bremssättel vom Renault Megane III RS in Verbindung mit der 345 x 30 mm Bremsscheibe vom Opel Vectra OPC . Passend für folgende Fahrzeuge mit Radlagergehäuse OE: 13136696 / 5308017: Opel Vectra C Limo Opel Vectra C CC Opel Vectra C Caravan Benötigte Komponenten: Bremssättel vom Renault Megane 3 RS Teilenummer: 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R Bremsscheiben vom Opel Vectra C OPC 345x30 mm Teilenummer: 93188445 Vorteile dieser Bremsanlage: bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar inklusive komplettem Schraubenmaterial Lieferumfang: 2x Bremssatteladapter komplett verzinkt für Opel Vectra C kompletter Schraubensatz hochfest. Materialzertifikat

€250.15*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Porsche Panamera Bremsanlage Bremssattel Adapter 375x36 Tuning Adapter

Bremssattel Adapter für die Golf 7 8 Audi A3 8V Baureihe auf die Porsche Panamera Bremssättel in Verbindung mit den Mercedes ML 350 Bremsscheiben 375x36. Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel)Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör. Vorteile dieser Bremsanlage: Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage Bremsscheiben sind sehr günstig in der Anschaffung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Porsche Cayenne 958 GTS Panamera Bremssättel Teilenummer: 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 20.A221.03 (Schaftlänge vom Bremssattel muss 87mm sein, siehe gelbe Markierung auf dem letzten Bild) Bremsscheiben vom Mercedes Benz GL - Klasse 375x36mm Teilenummer: 166 421 0912 Die Bremsbeläge müssen an der oberen Kante leicht angefast werden. Lieferumfang: 2x Bremssattel Adapter 2x passende Zentrierringe passendes hochfestes Schraubenmaterial Materialzertifikat

€222.43*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssattel Adapter Bremsanlage 360x32 365x34 Audi TT RS4 B5 B7 R8 8 Kolben Bremssattel

Bremssattel Adapter für die Golf 7 8 Audi A3 8V uvm auf die 8-Kolben Bremssättel vom R8 in Verbindung mit der Audi RS6 Bremsscheiben ( 360x32 ) Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. direkt passend an oben genannten Modellen und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren. Benötigte Komponenten: Bremssättel: Original RS4 B7 / R8 8 Kolben Brembo ( 20767502 ) Bremssättel Bremssattel links Teile Nr: 8E0615107 / 3D0615107A Bremssattel rechts Teile Nr: 8E0615108 / 3D0615108A Bremsscheibe: Audi RS4 B5 360x32 mm T.-Nr. 8D0615302B oder RS4 B7 Bremsscheibe 365x34mm Teilenummer 8E0615301AB ( wenn die 365 Scheibe verbaut wird, muss an der Bremssattelaufnahme unterlegt werden, damit die Bremsscheibengröße ausgeglichen wird. In diesem Fall empfehlen wir unseren Epytec Artikel mit der Nr. 707-BU) Lieferumfang: 2x Bremssattel Adapter für VW Golf 7 8 Audi A3 Seat Skoda, uvm. 2x passende Zentrierringe hochfetser Schraubensatz passende Buchsen für die 365er Scheibe Materialzertifikat

€215.75*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda TTRS RS3 Audi TT Bremsanlage Bremssattel Adapter 370x32

Bremssattel Adapter für die Golf 7 8 Audi A3 8V uvm. auf die TTRS Bremssättel in Verbindung mit den original TTRS Bremsscheiben. Die Adapter passen für folgende Fahrzeuge mit Aluachse: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführeten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel) Vorteile dieser Bremsanlage: Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren. Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom TTRS 370x32 mm Teilenummer 8J0615301F (RS3 Scheiben passen nicht, andere Topftiefe) Lieferumfang: 2x Bremssattel Adapter für VW Golf 7 Audi A3 Seat Skoda, uvm. hochfestes Schraubenmaterial Materialzertifikat

€229.78*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssattel Adapter Vorderachse TTRS RS3 Bremssättel Bremse Tuning Adapter

Bremssatteladapter für die Vorderachse des Golf 7 8 Audi A3 8V uvm. um die 4-Kolben Bremssättel des Audi TTRS in Verbindung mit Mercedes Bremsscheibe 350x32 zu fahren. Der TTRS Bremssattel wird einfach anstelle des original Sattels mithilfe unserer Adapter an die original Achsaufnahme geschraubt. Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Passend bei allen aufgeführeten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel) Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: Original TTRS Bremssättel Bremssattel links Teile Nr: 8J0 615 107 Bremssattel rechts Teile Nr: 8J0 615 108 Satz Bremsbeläge Teile Nr: 8J0 698 151 E Bremsscheiben vom Mercedes in 350x32 Teilenummer: 164 421 0512 (MERCEDES-BENZ), 164 421 1412 (MERCEDES-BENZ) Lieferumfang: 2x Bremssatteladapter für VW Golf 7 Audi A3 Seat Skoda, uvm. Zentrierringe für Bremsscheiben hochfestes Befestigungsschraubenmaterial Materialzertifikat

€250.65*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssatteladapter Renault Megane RS 4-Kolben Bremssattel Tuning Vorderachse Tuning Adapter

Bremssatteladapter für die Golf 7 8 Audi A3 8V uvm. auf die Brembo 4 Kolben Bremssättel vom Renault Megane III RS in Verbindung mit der 345 x 30 mm Bremsscheibe vom Audi A3 / Golf 5 . Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Die Bremssättel wurden serienmässig beim Porsche Cayenne, VW Touareg, und Q7 verbaut.Passend bei allen aufgeführeten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel) Benötigte Komponenten: Bremssättel vom Renault Megane 3 RS Teilenummer: 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R Bremsscheiben vom Golf 5 6 in 5x112 Lochkreis 345x30 mm Teilenummer VW Audi OE-Nr: 1K0 615 301 AB , 1K0 615 301 M Vorteile dieser Bremsanlage: bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen Komponenten kommen aus Serienfertigung von VW bei korrekter Montage Eintragung beim TÜV möglich. inklusive komplettem Schraubenmaterial Lieferumfang: 2x Bremssatteladapter komplett verzinkt für VW Golf 7 Audi A3 Seat Skoda, uvm. kompletter Schraubensatz hochfest. Materialzertifikat

€227.67*

Brake caliper adapter Golf 1 Caddy 14D Scirocco Jetta Porsche 996 4-piston brake caliper 330x28 Brake disc tuning adapter

Brake caliper adapter for the front axle of the Golf 1, Golf 1Cabrio, Caddy 14d, Jetta 1, Scirocco to the 330x28mm Lancia Delta III brake discs in conjunction with 4-piston Porsche 996 brake calipers. Advantages of this braking system: Extreme deceleration values also in conjunction with our rear axle brake system Brake discs with 4 bolt circle. The original Golf 1 bolt circle can therefore be retained. Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles Fits directly on the above-mentioned models and can therefore be easily retrofitted back to the original condition at any time Our EPYTEC brake caliper adapters do not require you to send in your standard parts, no rewelding - re-milling or re-drilling Required components: Brake discs Lancia Delta III 330x28 Total height 45mm Original part no.: 51827474. The hub bore must be turned up to 65.00mm (can also be done in-house, click here) Porsche brake calipers from 996 Porsche original part no.: 996.351.425/426 (Only 100% compatible with the specified Porsche calipers) Not STVO-approved, but the material certificate included in the scope of delivery can also be used to enable registration by individual approval for series vehicles. Minimum rim size: Can be used with 17 inch rims and larger. The minimum size of the inner diameter may vary depending on the rim shape and type. Scope of delivery: 2x brake caliper adapter for VW Golf 1, Caddy 14D, Scirocco, Jetta Matching high-strength screw set 1x material certificate

€212.20*

Bremssatteladapter Golf 2 3 Corrado Passat Audi RS2 Porsche 993 Bremssattel Bremsanlage Bremsscheibe 323x28 Seat Leon Cupra

Bremssatteladapter für original Seat Leon Cupra R 323x28 Bremsscheiben in Verbindung mit den 4 Kolben Porsche 993er Turbo oder Audi RS2 Bremssättel. passend an folgenden Fahrzeugen : VW Golf 2 und 3 VW Passat VW Corrado VW Jetta VW Polo Seat Toledo Benötigte Komponenten: Bremssättel vom Porsche 993 Turbo Baugleich mit Audi RS2 Bremssättel Teile Nr: 993.351.426 + 993.351.425 (Nur 100% passend mit den angegebenen Porsche- und Audi-Sätteln) Bremsscheiben vom Seat Leon Cupra R 323x28Teilenummer: 1ML 615 301 Vorteile dieser Bremsanlage: Bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden Lieferumfang: 2x Bremssatteladapter für VW Golf 2, 3, Passat, Corrado, Jetta, Toledo passender Schraubensatz Materialzertifikat

€221.71*

Brake caliper adapter 15 inch BMW E30 316i 320i brake caliper BMW E36 284x22mm brake disc Fiat Coupe

Brake caliper adapter for the front axle of the BMW E30 series with original 4-hole connection to drive the brake disc from the Fiat Coupe 284x22mm in conjunction with the brake calipers from the BMW E36. Required components: BMW E36 brake calipers, part number: Right: 34111160346 / Left: 34111160345 Brake caliper carrier BMW E36, part number: 34111160347 Brake discs from Fiat Coupe 284x22mm part no. 46403958 The brake discs must be rebored to the BMW bolt circle 4x100 and the hub diameter must be turned up to 66mm (can also be done in-house, click here) the brake calliper brackets need to be machined a little so that they do not touch the wheel bearing housing Advantages: 15-inch rims can be driven Extreme deceleration values Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles Fits directly on the above-mentioned models and can therefore be easily retrofitted to the original condition at any time Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling. Scope of delivery: 2x brake caliper adapter for BMW E30 316i, 320i, etc. High-strength screw set Material certificate 15-inch rims can be used with this brake caliper adapter

€190.19*

Bremssatteladapter BMW 5er F10 F11 Xdrive Bremsanlage 4 Kolben Bremssattel BMW G30-31 Bremsscheibe 374x36 Tuning Adapter

Bremssattel Adapter für die Vorderachse des 5er, 6er BMW F10, F11 Xdrive und allen heckangetriebenen BMW um die BMW G30-31 4-Kolben Bremssättel in Verbindung mit den BMW F07 F01 374x36mm Bremsscheiben zu fahren.Die BMW M5 4-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning Adapters an die original Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW G30-31 4-Kolben Brembo Bremssättel Teile Nr.: 34116891303 / 34116891304 Bremsscheibe vom BMW F07 F01 374x36mm Teilenummer: Links: 34116789543 / Rechts: 34116789544 Lieferumfang: 2x Bremssattel Adapter für 5er, 6er BMW F10, F11 Xdrive und heckangetriebenen Modellen passender Schraubensatz Materialzertifikat

€54.99*

Bremssatteladapter Audi 100 C4 S4 A6 S6 C4 330x22 Bremsscheibe Audi A6 C6 Hinterachse

Bremssattel Adapter um die Hinterachse von allen Audi 100 S4 C4 etc. auf die Bremsscheiben vom Audi A6 C6 330x22mm in Verbindung mit dem original verbauten Bremssattel umzubauen. Adapter sind passend für folgende Audi Modelle (Allrad): Audi 100 S4 C4 Audi S6 C4 Audi A6 C4 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben Ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: original Bremssattel Audi S4 C4 für 22mm Bremsscheibe, Teilenummer: 447615423 original Bremssattelträger Audi S4 C4, Teilenummer: 4D0 615 405 M Bremsscheibe 330x22 hinten vom Audi A6 C6 Teilenummer: 4F0 615 601F / 4F0 615 601D Lieferumfang: 2x Bremssatteladapter für Audi 100 C4 S4 Quattro Baureihe hochfestes Befestigungsschraubenmaterial Materialzertifikat

€161.65*

Bremssatteladapter Audi S4 B8 Akebono 6-Kolben Bremssattel Audi A4 B9 349x34mm Bremsscheibe

Bremssatteladapter für den Audi S4 B8 auf die Bremsscheibe 349x34mm vom Audi A4 B9 in Verbindung mit den Audi A4 B9 6-Kolben Akebono - Bremssättel. Die Adapter passen für folgende Fahrzeuge: Audi A4 B8 Audi S4 B8 Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Audi A4 B9 6-Kolben Akebono - Bremssättel Teilenummer: 8W0615105GB / 8W0615106GB Bremsscheiben 349x34mm vom Audi A4 B9 Teilenummer: 4M0 615 301 AB Lieferumfang: 2x Bremssatteladapter für den Audi A4 B8, Audi S4 B8 hochfestes Schraubenmaterial Materialzertifikat

€260.33*

Bremssatteladapter S14 S15 R33 R34 Z31 Z32 Z33 Audi RS6 6-Kolben Bremssattel 365x34mm Bremsscheibe

Bremssattel Adapter um die 6-Kolben Bremssättel vom Audi RS6 in Verbindung mit den Audi RS6 365x34mm Bremsscheiben an der Vorderachse passend für Nissan S13, S14, S15, R32, R33, R34, z31, z32, z33 zu fahren. Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: Bremssättel vom Audi RS6, Teilenummer: Rechts 4F0 615 108 / Links 4F0 615 107 Bremsbeläge, Teilenummer: 4B3698151A Bremsscheiben vom Audi RS6 365x34mm, Teilenummer: Rechts 4B3615302A / Links 4B3615301E Lieferumfang: 2x Bremssatteladapter passend für den Nissan S13, S14, S15, R32, R33, R34, z31, z32, z33 Materialzertifikat

€219.89*

Bremssatteladapter Toyota Supra MK3 Mercedes W220 Bremssattel 345x32mm Bremsscheibe Mercedes ML55 W163

Bremssattel Adapter für den Toyota Supra MK3 BJ 1987-1992 um den Mercedes SL 4-Kolben Bremssattel in Verbindung mit der Mercedes ML55 Bremsscheibe 345 x 32mm zu fahren. Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten : Bremssättel Mercedes Benz S600 Model W220 W211 Teilenummer: 20.7046.03 und 20.7046.04 Bremsbeläge Teilnummer: A0034200520 Mercedes ML55 Bremsscheibe 345 x 32mm Teilenummer: A 163 421 03 12 Lieferumfang : 2x Bremssattel Adapter für den Toyota Supra MK3 BJ 1987-1992 passende Zentrierringe komplettes Befestigungsmaterial Materialzertifikat

€86.34*

Audi A4 B8 A5 Q5 Cabrio Panamera 6-piston brake caliper 82mm 375x36mm brake disc

Brake caliper adapter for the Audi A4 B8, Audi A5, Audi Q5 series and many more to fit the Porsche Panamera 6 piston Brembo brake calipers in conjunction with the brake discs 375x36 from the Mercedes ML / GL 350. The adapters fit the following vehicles with wheel bearing housings OE: 8K0407257G | R8K0407257G | 8K0407253R Audi A4 B8 Audi A4 Allroad B8 Audi A4 Avant B8 Audi A5 8T3 Audi A5 Cabrio 8F7 Audi A5 Sportback 8TA Audi Q5 8RB Advantages of this brake system: extreme deceleration values also in conjunction with our rear axle brake system The material certificate included in the scope of delivery enables registration via individual approval, even for standard vehicles directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake calliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling. Required components: Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper must be 82mm, see yellow marking on the last picture) Brake discs from Mercedes Benz ML / GL - class 375x36mm part number: 166 421 0912 The hub diameter of the brake disc must be turned up to 68mm, this can also be done in-house. The brake pads must be slightly chamfered on the upper edge. Scope of delivery: 2x brake caliper adapter for Audi A4 B8, Audi A5, Audi Q5 and many more High-strength screw material Material certificate Template to check whether the brake system fits under your rim installation instructions

€249.26*

Audi A4 B8 A5 Q5 Cabrio Panamera 6-piston brake caliper 82mm 375x36mm brake disc

With our high-performance brake system kit for the Audi A4 B8, Audi A5, Audi Q5 and many other vehicles, you can convert your front axle to a 6-piston brake system and achieve ideal performance. With this high-performance brake system kit, you can use the Porsche Panamera 6-piston Brembo brake callipers in conjunction with the brake discs 375x36 mm from the Mercedes ML/ GL-CLASS on the Audi A4 B8, Audi A5, Audi Q5 and many other vehicles. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs,that are also installed in series-production vehicles. These OE parts not only make replacing the brakes simple and straightforward, but also make it easier to register them with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic pad, enables ideal performance while simultaneously reducing brake dust, temperature and wear. With this high-performance brake kit, you can get started right away and have everything you need to convert your front axle to a 6-piston brake system. The adapters fit the following vehicles with wheel bearing housings OE: 8K0407257G | R8K0407257G | 8K0407253R Audi A4 B8 Audi A4 Allroad B8 Audi A4 Avant B8 Audi A5 8T3 Audi A5 Cabrio 8F7 Audi A5 Sportback 8TA Audi Q5 8RB Advantages of this brake system: Our components, such as brake callipers and brake discs, come from standard vehicles and are OE parts. This makes replacing the brakes simple and straightforward and facilitates registration with the TÜV. The material certificate included in the scope of delivery can also be used to enable registration via individual approval for series production vehicles High-performance brake pads with a longer service life than original pads extreme deceleration values also in conjunction with our rear axle brake system Directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake caliper adapters do not require you to send in your standard parts, no re-welding, re-milling or re-drilling. Note: The kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake callipers in the colour of your choice and without the logo, whereby the delivery time is around 2-3 weeks longer. Get our high-performance brake system kit now and experience ideal performance and durability. Scope of delivery: 2x Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J ( left / right ) including complete new brake caliper bracket kit matching set of perforated Sport Zimmermann brake discs MERCEDES-BENZ ML/ GL-KLASSE 375x36mm 2x ceramic brake pads for less brake dust and longer service life 2x brake caliper adapters for Audi A4 B8, Audi A5, Audi Q5 and many more 2x matching steel flex hoses High-strength screw material Material certificate Template to check whether the brake system fits under your rim installation instructions

€1,436.36*

Bremssatteladapter BMW 1er 2er 3er 4er F20 F21 F23 F31 F32 F33 Cabrio Coupe BMW M2 M3 400x36 Bremsscheibe 6 Kolben Bremssattel Tuning Adapter

Bremssattel Adapter für die Vorderachse des 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36 um die BMW F10 M5 6-Kolben Bremssättel in Verbindung mit den 400x36mm BMW M2 Bremsscheiben zu fahren.Die BMW F10 M5 6-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning-Adapters an die original Achsaufnahme geschraubt. Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten: BMW F10 M5 6-Kolben Bremssättel Teile Nr. Bremssattel links: 34117845747 / Bremssattel rechts: 34117845748 Bremsscheibe vom BMW M2 400x36mm Teilenummer: Bremsscheibe links: 34118072017 / Bremsscheibe rechts: 34118072018 Lieferumfang: 2x Bremssattel Adapter für 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36 passender Schraubensatz Materialzertifikat KFZ Schein Eintragung

€280.40*

Bremssatteladapter BMW E36 316i 328i Compact Umbau BMW E46 Bremsanlage Hinterachse Tuning Adapter

Bremssatteladapter für die Hinterachse des BMW E36 Compact zur Montage der BMW E46 Bremsanlage mit Bremsscheiben 320x20 mm in Verbindung mit dem BMW E46 Bremssattel. Adapter sind passend für folgende Fahrzeuge: BMW 3er Compact 316g BMW 3er Compact 316i BMW 3er Compact 316i BMW 3er Compact 318Ti BMW 3er Compact 318Ti BMW 3er Compact 323Ti Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. Benötigte Komponenten: Bremsscheiben hinten BMW E46 mit 320x22mm Teile Nr: 34201166073 Bremssättel vom BMW E46 Teile Nr: 34216750161 / 34216750162 Lieferumfang: 2x Bremssattel Adapter für die Hinterachse vom BMW E36 Compact hochfestes Schraubenmaterial Materialzertifikat

€171.89*

Brake systems KIT rear axle VW Golf 7 Audi A3 Porsche Cayenne 4-piston caliper VW Golf 7R hand brake caliper 356x22 brake disc

With our high-performance brake system kit for the VW Golf 7, Golf 7R, Audi A1 8X, Audi A3 8V, Seat Leon ST 5F, Skoda Octavia III 5E and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 7R handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 7R handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the VW Golf 7, Golf 7R, Audi A1 8X, Audi A3 8V, Seat Leon ST 5F, Skoda Octavia III 5E and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE: 5Q0505435J / 5Q0505436J) VW Golf 7 VW Golf 7R Audi A1 8X Audi A3 8V Seat Leon ST 5F Skoda Octavia III 5E Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a aloy steering knuckle (not suitable for cars with an steel steering knuckle). VW Golf 7 R handbrake caliper is not included in delivery original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for VW Golf 7 VW Golf 7R Audi A1 8X Audi A3 8V Seat Leon ST 5F Skoda Octavia III 5E u.v.m. 2x matching steel braided lines Assembly aid for brake disc assembly high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instructions (click here)

€1,340.30*

Brake systems KIT rear axle Golf 5 6 Audi A1 A3 Porsche Cayenne 4-piston caliper VW Golf 5R 6R handbrake caliper 356x22 brake disc

With our high-performance brake system kit for theGolf 5, 6, Audi A1, A3 series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 5R/ 6R handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 5R/6R handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the Golf 5, 6, Audi A1, A3 series and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE: 1k0505433/1k0505434) Audi A1 (8X) Audi A3 (8P) VW Golf V (1K) VW Golf VI (5K) VW Golf Variant V (1K) VW Golf Variant VI (5K) Seat Altea (5P) Skoda Octavia (1Z) Skoda Octavia (5E) Skoda Superb (3T) Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a alloy steering knuckle (not suitable for cars with an steel steering knuckle). VW Golf 5R/6R handbrake caliper is not included in delivery Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for Golf 5, 6, Audi A1, A3 series 2x matching steel braided lines Assembly aid for brake disc assembly high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instructions (click here)

€1,403.59*

Brake systems KIT rear axle Audi TT VW Tiguan Porsche Cayenne 4-piston caliper Audi TT handbrake caliper 356x22 brake disc

With our high-performance brake system kit for the Audi TT, VW Tiguan series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the Auti TT handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the Audi TT handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the Audi TT, VW Tiguan series and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE:3C0505435G / 3C0505436G) VW Passat B6 VW Sharan VW Tiguan Audi Q3 Audi TTRS 8J Audi TT 8J Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a steel steering knuckle (not suitable for cars with an alloy steering knuckle). Audi TT handbrake caliper is not included in delivery Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for Audi TT, VW Tiguan series 2x matching steel braided lines high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instructions (click here)

€1,403.59*

Brake systems KIT rear axle Touran Jetta Audi TT Skoda Porsche Cayenne 4-piston caliper VW Golf 7R handbrake caliper 356x22 brake disc

With our high-performance brake system kit for the VW Touran, Jetta, Audi TT series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 7R handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 7R handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the VW Touran, Jetta, Audi TT series and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE: 5QA505433A / 5QA505434A) VW Touran VW Jetta Audi TT Skoda Octavia III Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Here you have a report about the successful registration at the TÜV (click here) Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a steel steering knuckle (not suitable for cars with an alloy steering knuckle). VW Golf 7 R handbrake caliper is not included in delivery. You still have to get this one, with holder: original brake calipers with carrier for handbrake from Golf 7R part number: Part number brake caliper: 5Q0615424 / 5Q0615424 Part number brake caliper carrier: 5Q0615425 / 8V0615425B Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of Rotinger 356x22mm Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for VW Touran, Jetta, Audi TT series 2x matching steel braided lines Assembly aid for brake disc assembly high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instruction

€1,372.00*

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Brake caliper adapter 360x36 Brake disc Mercedes Porsche Panamera 82mm Brake caliper

Brake caliper adapter for the front axle on the Golf 7 8 Audi A3 8V and many more to the Porsche Panamera 6 piston Brembo brake calipers in conjunction with the brake discs 360x36 from the Mercedes CLS 500 Coupe. The adapters fit the following vehicles with aluminium steering knuckles: Audi A3 8V Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Passat B6 VW Passat B7 VW Tiguan AD1 VW Touran 5T1 Advantages of this brake system 18 inch rims can be used extreme deceleration values also in conjunction with our rear axle brake system the material certificate included in the scope of delivery enables registration by individual approval, even for standard vehicles Directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding, re-milling or re-drilling. Required components: Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper must be 82mm, see yellow marking on the last picture) Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212 Scope of delivery: 2x brake caliper adapter for VW Golf 7 Audi A3 Seat Skoda, etc. High-strength screw material Material certificate Template to check whether the brake system fits under your rim installation instructions

€267.75*

Brake systems KIT VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Brake caliper adapter 360x36 Brake disc Mercedes Porsche Panamera 82mm Brake caliper

With our high-performance brake system kit for the Golf 7, 7, Audi A3 8V and many other cars, you can convert your front axle to a 6-piston brake system and achieve ideal performance. With this high performance brake kit you can use the Porsche Panamera 6-piston Brembo calipers in combination with the 360x36 mm brake discs from Mercedes ML/GL-KLASSE to Golf 7, Golf 7 and Audi A3 series. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and wear. With this high-performance brake kit, you can get started straight away and have everything you need to convert your front axle to a 6-piston brake system. The high performance brake system kit is suitable for the following cars with aluminium axle stub: Audi A3 Sportback 8YA Cupra Leon KL1 Seat Ateca KH7 Seat Leon KL1 Seat Leon 5F1 Skoda Octavia III Skoda Octavia IV NX3 Skoda Octavia IV Combi NX5 VW Golf VII 5G1 VW Golf VIII CD1 VW Passat 3G2 VW Tiguan AD1 VW Touran 5T1 Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability.Suitable for all listed cars with aluminium steering knuckle (not suitable for cars with an steel steering knuckle). Scope of delivery: 2x Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (left/right) including complete new brake caliper bracket kit matching set of Brembo Sport brake discs T 350x36mm 2x ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for Golf 7, 8, Audi A3 Cupra Leon Seat Leon Skoda and others 2x matching steel braided lines Assembly aid for brake disc assembly high strength bolt material Material certificate Stress analysis / FEM calculation for registration Template to check whether the brake system fits under your rim installation instructions The original 18-inch rims can be used

€1,449.15*

VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Brake caliper adapter 360x36 Brake disc Mercedes Porsche Panamera 82mm Brake caliper

Brake caliper adapter for the front axle on the VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more to the Porsche Panamera 6 piston Brembo brake calipers in conjunction with the brake discs 360x36 from the Mercedes CLS 500 Coupe. Suitable for the following vehicles with steel axle stubs: Audi A1 S1 quattro 8X1 Audi A3 8P1 Audi A3 Sportback 8PA Audi TT 8J3 Seat Altea 5P1 Seat Leon 5F1 VW Caddy III Großraumlimosine 2CB VW Caddy III Kasten 2CA VW Golf Plus 521 VW Golf V 1K1 VW Golf V Variant 1K5 VW Golf VI 5K1 517 VW Golf VI Cabriolet 517 VW Golf VI Variant AJ5 VW Jetta IV 162 VW Scirocco 137 VW Touran 1T3 VW Touran 5T1 Advantages of this brake system: 18 inch rims can be used extreme deceleration values also in conjunction with our rear axle brake system the material certificate included in the scope of delivery enables registration by individual approval, even for standard vehicles Directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake calliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling. Required components: Porsche Cayenne 958 GTS Panamera brake calipers part number: 7PP615149J / 7PP615150J (shaft length of the brake caliper must be 82mm, see yellow marking on the last picture) Brake discs from Mercedes Benz CLS 500 Coupe 360x36mm part number: A0004211712 / A2184210212 Scope of delivery: 2x brake caliper adapter for VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and many more. High-strength screw material Material certificate Template to check whether the brake system fits under your rim Installation instructions

€265.51*

Brake system KIT VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea brake caliper adapter 360x36 brake disc Mercedes Porsche Panamera 82mm brake caliper

With our high-performance brake system kit for the Golf 5 6 Audi A3 series and many other cars, you can convert your rear axle to a 6-piston brake system to achieve ideal performance. With this high performance brake system kit you can drive the Porsche Panamera 6-piston Brembo brake calipers in combination with the 360x36 mm brake discs from Mercedes GL-Klasse on the Golf 5 6 Audi A3 series and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your front axle to a 6-piston brake system. The high-performance brake kit is suitable for the following cars with steel steering knuckles VW Golf 5 6 Golf Plus Touran Caddy 3 Jetta 4 Audi A3 (8P) Seat Leon (1P1) Seat Altea Seat Altea XL Suitable for all vehicles listed that have a steel steering knuckle (not suitable for vehicles with an aluminium steering knuckle)It may be necessary to install steering lock limiters for complete steering lock, these can be found below in the appropriate accessories. Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a steel steering knuckle (not suitable for cars with an alloy steering knuckle). Scope of delivery: 2x Porsche Cayenne 958 GTS Panamera brake caliper part no.: 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03)(left / right) including complete new brake calliper bracket kit matching set of Brembo Sport brake discs 360x36 mm ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for Golf 5 6 Audi A3 series 2x matching steel braided lines Mounting aid for brake disc assembly high-strength bolt material Template to check whether the brake system fits under your rim Material certificate

€1,446.71*

Brake systems KIT rear axle VW Golf 5 6 Audi A3 TT R8 adapter Porsche Cayenne 310x22 brake disc

With our high-performance brake system kit for the VW Golf Golf 5/6 Audi TT R8 A3 series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 5 R handbrake caliper and achieve ideal performance. With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 5 R handbrake caliper in combination with the 310x22 mm brake discs from the VW Golf 5 R on the VW Golf 5/6 Audi TT R8 A3 series and many other cars. Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV. The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison. With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system. The high-performance brake kit is suitable for the following cars with steel steering knuckles (front and all-wheel drive) VW Golf 5 VW Golf 5R Caddy 3 Touran Audi A3 8P Ausi S3 8P Seat Leon Cupra Seat Altea Skoda VRS Advantages of this brake system: our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV. The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars. High-performance brake pads with longer service life than the original pads extreme deceleration values also in combination with our rear axle brake system directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling. Note: the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer. Get our high performance brake kit now and experience ideal performance and durability. Suitable for all listed cars with a steel steering knuckle (not suitable for cars with an alloy steering knuckle).On the all wheel drive models the ABS sensor has to be changed because the Cayenne brake caliper is mounted there. VW Golf 5 R handbrake caliper is not included in delivery Scope of delivery: 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit matching set of matching set of original Golf 5 R brake discs 310x22 mm part number: 1K0 615 601 N ceramic brake pads for less brake dust and longer lifetime 2x brake caliper adapter for VW Golf 5 6 Audi A3 series high-strength bolt material Material certificate Stress analysis / FEM calculation for registration Installation instructions (click here)

€992.36*

Bremssatteladapter BMW E92 E93 E91 E90 6-Kolben Bremssattel 400x36 Keramik Stahl Bremsanlage BMW M2 M3 M4

Bremssattel Adapter für die Vorderachse des BMW E92 E93 E91 E90 uvm. um die BMW Stahl Sportbremse vom BMW M2 oder die Keramikbremse vom BMW M3 / M4 zu verbauen. Passend an folgenden Fahrzeugen mit Lochmaß 122mm an der Achsaufnahme: BMW E90 BMW E91 BMW E92 BMW E93 BMW E82 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben einfache Montage ein Muss bei Leistungssteigerung Materialzertifikat wird mitgeliefert einfach wieder in original Zustand rückrüstbar Benötigte Komponenten für den Einbau der Carbon-Keramik Bremsanlage: BMW Performance 6-Kolben Bremssättel vom BMW M3 M4, Teile Nr. 34117850463 / 34117850464 Bremsbeläge vom BMW M3 M4, Teile Nr. 34112284970 Bremsscheibe vom BMW BMW M3 M4 von der Vorderachse in 400x38mm Teilenummer: 34112284805 / 34112284806 Benötigte Komponenten für den Einbau der Stahl Bremsanlage BMW Performance 6-Kolben Bremssättel vom BMW M2 , Teile Nr. 34118745793 / 34118745794 Bremsbeläge vom BMW M2, Teile Nr. 34112284869 Bremsscheibe vom BMW BMW M2, von der Vorderachse in 400x36mm, Teilenummer: 34118072017 / 34118072018 Lieferumfang: 2x Bremssattel Adapter für BMW E92 E93 E91 E90 uvm. hochfestes Befestigungsschraubenmaterial Materialzertifikat

€221.50*

Bremssatteladapter BMW E92 E93 E91 E90 4-Kolben Bremssattel 380x28 Keramik Stahl Bremsanlage BMW M2 M3 M4

Bremssattel Adapter für die Hinterachse des BMW E92 E93 E91 E90 uvm. um die BMW Stahl Sportbremse vom BMW M2 oder die Keramikbremse vom BMW M3 / M4 zu verbauen. Passend an folgenden Fahrzeugen: BMW E90 BMW E91 BMW E92 BMW E93 BMW E82 Vorteile dieser Bremsanlage: Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten deutlich verbessertes Fading durch innenbelüftete Scheiben ein Muss bei Leistungssteigerung durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden. einfach wieder in original Zustand rückrüstbar Benötigte Komponenten für den Einbau der Carbon-Keramik Bremsanlage: BMW Performance 4-Kolben Bremssättel vom BMW M3 M4, Teile Nr. 34217850465 / 34217850466 Bremsbeläge vom BMW M3 M4, Teile Nr. 34212284990 Bremsscheibe vom BMW BMW M3 M4 von der Hinterachse in 380x28mm Teilenummer: 34212284807 / 34212284808 Benötigte Komponenten für den Einbau der Stahl Bremsanlage BMW Performance 4-Kolben Bremssättel vom BMW M2 , Teile Nr. 34218745797 / 34218745798 Bremsbeläge vom BMW M2, Teile Nr. 34218091600 Bremsscheibe vom BMW BMW M2, von der Hinterachse in 380x28mm, Teilenummer: 34118072019 / 34118072020 Lieferumfang: 2x Bremssattel Adapter für BMW E92 E93 E91 E90 uvm. hochfestes Befestigungsschraubenmaterial Materialzertifikat

€241.05*

Brake caliper adapter VW Passat B6 Variant Audi A3 400x38mm brake disc Audi 6 piston brake caliper

Brake caliper adapter for the VW Passat B6, Sharan, Audi A3 8P and many more for the Audi e-tron 6 piston Brembo brake calipers in conjunction with the 400x38 brake discs from the Audi A6 4G. The adapters fit the following vehicles with aluminium steering knuckles 3C0407257F / 3C0407253F : Audi A3 8P Audi A3 Sportback 8P Seat Alhambra 2 710,711 Seat Leon2 1P1 VW CC 358 VW Passat B6 3C2 VW Passat B6 CC 357 VW Passat B6 Variant 3C5 VW Passat B7 362 VW Passat B7 Variant 365 VW Sharan 7N1 VW Sharan 7N1 Advantages of this brake system: extreme deceleration values also in conjunction with our rear axle brake system The material certificate included in the scope of delivery enables registration via individual approval, even for series vehicles directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding, re-milling or re-drilling. Required components: Audi e-Tron 6-piston brake caliper part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C Brake discs from Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T Scope of delivery: 2x brake caliper adapter for VW Passat B6, Sharan, Audi A3 8P and many more High-strength screw material material certificate installation instructions

€253.01*

Bremssatteladapter W447 Vito V-Klasse Hinterachse auf 4-Kolben Bremssattel mit 360x26mm Bremsscheibe

Bremssatteladapter für die Hinterachse des Mercedes W447 Viano auf die Mercedes E55 AMG W211 4-Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 360x26 vom Mercedes SLS C197 AMG.Um die Bremsanlage umzubauen, muss die Handbremse auf die Handbremsbacken von der Mercedes Benz E-Klasse (W211) umgebaut werden. Das ist kein großer Aufwand, da die Spreizbleche vom W447 übernommen werden können und einfach nur die Bremsbacken getauscht werden müssen, damit die Bremsscheibe 360x26 vom Mercedes SLS C197 AMG montiert werden kann. Die Adapter passen für folgende Fahrzeuge: Mercedes W447 Viano / Vito Vorteile dieser Bremsanlage: extreme Verzögerungswerte auch in Verbindung mit unserer Vorderachsbremsanlage Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben hinten durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. originales Handbremsseil kann weiter verwendet werden und muss nicht gekürzt werden Benötigte Komponenten: Mercedes E55 AMG W211 4-Kolben Brembo - Bremssättel, Teilenummer: A0044233698 ; Brembo Nummer: 20.8492.00 2A / 20849200 2A Bremsbeläge, Teilenummer: A 003 420 62 20, A 004 420 47 20, 005 420 41 20 Bremsscheiben vom Mercedes Benz GL - Klasse 360x26mm Teilenummer: A1974230112, 1974230112, Brembo Teilenummer: 09.A907.11 Handbremsbacken von der Mercedes Benz E-Klasse (W211) Teilenummer: 2304200312, 2304200320 Lieferumfang: 2x Bremssatteladapter für die Hinterachse des Mercedes W447 Viano Vito, V-Klasse hochfestes Schraubenmaterial Materialzertifikat Einbauanleitung (hier klicken)

€184.71*

Ford Focus RS MK2 Bremssatteladapter 375x36 Bremsscheibe Audi RS4 B9 6 Kolben Brembo Bremssattel Tuning Adapter

Bremssatteladapter für den Ford Focus RS auf die Bremsanlage vom Audi RS4 B9, 375x36mm Bremsscheibe in Verbindung mit dem 6-Kolben Brembo Bremssattel. Die Adapter passen für folgende Fahrzeuge: Ford Focus II 2.5 RS Ford Focus II 2.5 RS 500 Vorteile dieser Bremsanlage: durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren. Benötigte Komponenten: Audi RS4 B9 6-Kolben Bremssättel Teilenummer: 8W0615107AL / 8W0615108AL Bremsbeläge, Teilenummer: 8W0 698 151 AN Bremsscheiben vom Audi RS4 B9 375x36mm Teilenummer: 4M0615301AM Lieferumfang: 2x Bremssatteladapter für den Ford Focus II 2.5 RS hochfestes Schraubenmaterial Materialzertifikat

€299.86*

Germany	€0.00
United Kingdom	€20.60
Austria	€18.21
France	€18.21
Switzerland	€19.77
Italy	€15.84
Spain	€15.84
Andorra	€15.84
Arab Emirates	€35.93
Afghanistan	€35.93
Antigua and Barbuda	€40.60
Anguilla	€40.60
Albania	€19.98
Armenia	€35.93
Niederländische Antillen	€40.60
Angola	€40.60
Antarctica	€15.84
Argentina	€40.60
American Samoa	€40.60
Australia	€40.60
Aruba	€40.60
Åland Islands	€15.84
Azerbaijan	€35.93
Bosnia and Herzegovina	€19.98
Barbados	€40.60
Bangladesh	€35.93
Belgium	€18.21
Burkina Faso	€40.60
Bulgaria	€16.36
Bahrain	€35.93
Burundi	€40.60
Benin	€40.60
Saint Barthélemy	€15.84
Bermuda	€40.60
Brunei Darussalam	€35.93
Bolivia (Plurinational State of)	€40.60
Bonaire, Sint Eustatius and Saba	€40.60
Brazil	€40.60
Bahamas	€40.60
Bhutan	€35.93

500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)

Advantages:

Delivery:

Login