You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Golf 5 6 GTI TSFI Audi A3 TT 8P Brake Caliper Adapter Front Axle Brake System

€241.66*

Available
Delivery by Thursday, 16.05.2024 if you order within the next 18 Hours.
Product number: 716
Weight: 2.384 kg
Einbauort: vorne
Material: Stahl (hochfest)
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie

Brake caliper adapter for Golf 5 6 Audi A3 8P , front axle, Audi A3 8P to install the 4 piston brake caliper of Audi TTRS, combined with the 350x32 brake disc of Mercedes.

Thanks to our adapter, the Audi TTRS caliper is simply screwed to the original axle instead of the original caliper.

Suitable for the following vehicles:

  • VW Golf 5 / 6
  • Touran
  • Caddy 3
  • Audi A3 8P
  • Audi S1

They are suitable for vehicles having an axle stub made of steel and not of aluminum.

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • original TTRS brake calipers. Reference left : 8J0 615 107. reference right : 8J0 615 108
  • brake pads, reference : 8J0 698 151 E
  • brake discs Mercedes  350x32, reference : 164 421 0512 (MERCEDES-BENZ), 164 421 1412 (MERCEDES-BENZ)

Delivery:

  • 2x adapter plates for Golf 5 Audi A3 8P
  • 2x hub centric rings for brake discs
  • high strength mounting screws
  • material certificate

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

9 of 9 reviews

4.89 out of 5 stars


89%

11%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


3 August 2019 07:41

Alexander H

Sehr gute Qualität, perfekte Gewindegänge ohne Grad etc. Passgenauigkeit 100%. Support ist einzigartig, sehr persönlich und bieten einen wirklich Hilfe an wenn der Tüver zwecks Eintragung mal die Tage hat Als Verbesserung würde ich eigentlich nur die Flächenpressung der Kopfschrauben was breiter gestalten von den 12,9 er Schrauben. Rundum zufrieden, Epytec weiter so!!! Gruß aus Leverkusen

11 June 2019 11:40

Greiner C

Alles tip top. Sehr gut, sehr schnell

1 June 2019 20:25

Cristian P

ok

1 June 2019 09:35

Cristian P

Alles Super nach dem einbau sehr gutes ergebniss habt ihr Interesse an photos nach dem umbau

30 March 2019 10:27

Nils S

Fahre die Adapter auf meinem TTS mit TTRS Bremsanlage Positives: -Passgenauigkeit Top! -Mercedes Scheiben sind deutlich günstiger ( selbst Tarox oder ähnliches da ich viel Rennstrecke fahre) -keinerlei Flattern im Lenkrad wie mit der Serien RS Scheibe. -lohnt sich finanziell bereits nach dem ersten mal Scheibenwechsel Neutral:: -Adapter sind sehr massiv, deutlich schwerer als Serienhalter des RS Sattels.( ein Epytec Halter wiegt mehr als beide originalen) Einerseits vertrauen erweckend, Performance mäßig leider suboptimal (ungefederte Massen) Negativ: -die mitgelieferten Schrauben könnten einen Bund vertragen, sie haben einen sehr kleinen Schraubenkopf und liegen daher nicht perfekt im Sitz des Sattels und des Halters der am Achsschenkel verschraubt wird. Die Gewinde passen perfekt und der Sattel kann beim Einbau auch kein bisschen verrutschen da wie oben beschrieben die Passgenauigkeit echt top ist, versteht mich nicht falsch aber das wäre noch echt Top wenn der schraubenkopf so groß wäre wie die Auflagefläche die für die Schraube gedacht ist.

26 March 2019 20:47

Joerg W

Fahre ein Seat Leon Cupra 290 mit der kleinen Bremse und habe mich entschlossen die Performance Bremse zu fahren aber nicht die Kompi 370x32. Da ich ab und an Hockenheimring,Nordschleife und Grand Prix Strecke fahre habe ich mich umgehört welche Kombi mit der Brembo 4 Kolben funktionieren würde und immer wieder gehört habe das die Kompi mit den Sattelhalter von epytec und als Scheibe eine 350x32 in Verbindung mit Endless me20 funktionieren würde entschloss ich mich dazu. Die Sattelhalter werden zwar nur für Golf 5 und 6 usw. angeboten, aber passen auch ohne Änderungen an den Seat Leon Cupra. Kann die Kombi mit den epytec Sattelhalter nur empfehlen da man sehr viel Geld sparen kann und eine standhafte Bremse bekommt.

7 December 2018 06:43

Filippo S

Ottimo prodotto..

7 August 2018 13:57

ROBERTO R

top quality

13 March 2018 17:03

Gianuario M

Endlich kann ich meine gewünschte Bremsanlage einbauen, dank eurem Adapter.

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

Steel Braided Brake Line VW Golf MK5 MK6 MK7 GTI R32 Audi A3 S3 V6 Brembo TTRS Brake Conversion
  • ✓ for e.g. VW Golf MK5 MK6 MK7 Audi A3 etc...
  • ✓ connection 1 M10x1 external thread bent
  • ✓ connection 2 M10x1 internal thread straight
  • ✓ lenght: 63 cm  / transparent covered

€91.90*
Artikelnummer: SF109
Zimmermann sports brake discs 350x32 VR6 R32 S3 Mercedes M-Klassw R-Klasse GL-Klasse 400.3649.52
  • ✓ Zimmermann Sports Brake Disc 350x32 Manufacturer Number 400.3649.52
  • ✓ Mercedes M-Class R-Class GL-Class VR6 R32 S3

€286.28*
Artikelnummer: ZIM168
EBC brake pads Yellowstuff front axle Audi TT 2.5 RS quattro
  • ✓ assembly position: front
  • ✓ suitable for Audi TT 2.5 RS quattro

€250.48*
Artikelnummer: DP42070R
1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
You can find out everything about your order via your -> View customer account