You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Ford Focus Volvo S40/V50 C30 C70 ST Brake Caliper Adapter Porsche 996 Jaguar 355x32 Brake Disc

€494.52*

6-8 weeks product will be made for you,
Delivery by Monday, 08.07.2024 if you order within the next 8 Hours.
Product number: 321-Sonder
Weight: 1.996 kg
Einbauort: vorne
Material: Stahl (hochfest)
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie

Brake caliper adapter suitable for all:

  • Ford Focus MK2 (except RS)
  • Volvo S40/V50 C30 C70 , YoC from 2004

combined with the Porsche 996 4 piston brake calipers and the 355x32mm brake discs from Jaguar.

Advantages:

  • high deceleration, also in conjunction with our rear axle braking system
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

  • brake caliper: Porsche 996 , reference 996.351.430
  • brake disc: Jaguar XK 8 4,2L 355x32mm reference C2C25337 (also available from EBC directly from us)

Lieferumfang:

  • 2x brake caliper adapters for Ford Focus MK2 ST and Volvo S40/V50 C30 C70
  • high strength mounting screws
  • 2x centric rings
  • corresponding steel braided brake lines
  • material certificate
  • copy of vehicle document to simplify the registration

Notes/tips:

For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plate.

For brake conversion on the rear axle, we recommend that you generally proceed as follows:
  • install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Stahlflex-Bremsleitung konfigurieren <<
  • always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


2 March 2019 07:29

Georgios C

Bin sehr zufrieden mit den Adapter sehr passgenau und einfacher Einbau kann ich nur weiterempfehlen. Immer wieder gerne bei epytec super Kundenbetreuung

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

brake disc Jaguar F-Type Coupe Cabriolet 3.0 S 5.0 S Zimmermann sports 355x32 290.2264.52
  • ✓ Zimmermann Sports Brake Disc 355x32 Manufacturer Number 290.2264.52
  • ✓ Jaguar, F-Type, XF, XJ, S-Type

€219.07*
Artikelnummer: ZIM162
Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Artikelnummer: SF1
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
EBC brake disc Black-Dash Disc 355x32mm Jaguar XF XJ XK Cabrio Sportbrake
  • ✓ Installation location: front
  • ✓ Number of holes: 5
  • ✓ Bolt circle: 108
  • ✓ Diameter: 355mm
  • ✓ Thickness: 32mm
  • ✓ Height: 48mm

€577.13*
Artikelnummer: USR1599
1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
EBC brake disc premium disc (front 5x108mm)

€474.84*
Artikelnummer: D1599
EBC brake pads Yellowstuff front axle Porsche 911 3.6 Carrera 4S 3.6 T
  • ✓ assembly position: front
  • ✓ suitable for Porsche 911 3.6 Carrera 4S 3.6 T

€255.55*
Artikelnummer: DP41515R
EBC brake pads Redstuff front axle Porsche 911 3.6 GT2 GT3
  • ✓ assembly position: front
  • ✓ suitable for Porsche 911 3.6 GT2  GT3 

€297.28*
Artikelnummer: DP31516C
You can find out everything about your order via your -> View customer account