You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter Mercedes W639 W447 Vito Viano 6-piston Brake Caliper W219 CLS 55 AMG 390x36mm Mercedes GL Brake Disc

€229.60*

Available
Delivery by Wednesday, 15.05.2024 if you order within the next 3 Hours.
Product number: 1105
Weight: 2.86 kg
Einbauort: vorne
Material: Stahl (hochfest)

Brake caliper adapter on modles Mercedes W639 Viano, for conversion to the Mercedes W212 AMG 6-piston Brembo brake calipers, combined with the brake discs 390x36 from the Mercedes W205 C63 AMG.

Suitable for the following vehicles: 

  • Mercedes W639 Viano / Vito
  • Mercedes W447 Viano / Vito

Advantages of this brake system:

  • high deceleration, also in conjunction with our rear axle braking system
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

  • brake caliper: Mercedes W212 W218 AMG 6-piston, reference A2314212698 ; Brembo reference : 20.A495.04
  • brake disc: Mercedes Benz W205 W213 390x36mm, reference : A2314211812
    • or
  • Brake disc from Mercedes GLS 63 AMG (X166) from the front axle in 390x36mm Part Number: A2304211212 Brembo No: 09.9313.33

Delivery: 

  • 2x brake caliper adapters Mercedes W639 Viano
  • high strength mounting screws
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu Prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Artikelnummer: SF1
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Artikelnummer: LK1
You can find out everything about your order via your -> View customer account