You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

VW Golf Mk3 Corrado VR6 Brake Caliper Adapter Golf Mk4 V6 Audi S3 Brake 312x25mm 4-piston 996 Porsche Brake Caliper

€208.49*

Available
Delivery by Thursday, 02.05.2024 if you order within the next 19 Hours.
Product number: 1095
Weight: 3.852 kg
Einbauort: vorne
Material: Stahl (hochfest)
Brake caliper adapter, front axle, for conversion to the brake calipers from the Porsche 996, combined with the 312x25mm brake disc from the Audi S3/Golf 4 V6.

Suitable for all vehicles with VR6 Plusaxle:

  • VW Golf Mk3 2.0l 16V and VR6 GTI
  • VW Passat 2.0l 16V 35i and VR6 GTI
  • VW Corrado 2.0l 16V and VR6 GTI
  • Seat Toledo

Advantages of this brake system:

  • high deceleration, also in conjunction with our rear axle braking system
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components :

  • brake caliper: Porsche 996, reference 996.351.422 + 996.351.421 / 986.351.421 + 986.351.422 (Nur 100% passend mit den angegebenen Porschesätteln) (only 100% suitable with the specified Porsche calipers)
  • brake disc:  Audi S3 (8L) /Golf Mk4 GTI 312x25 mm, reference 8N0 615 301 A

Delivery:

  • 2x brake caliper adapters for VW Golf Mk3 VR6, Passat VR6, Corrado VR6, Seat Toledo
  • complete high-strength screw material
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. Jetzt direkt zu >> Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


15 November 2023 10:38

Maksim L

I chose this product because it is a ready-made solution for tuning my VW Corrado, which does not require fitting. Just buy and install

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
Steel Braided Brake Line VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta Brembo Porsche TTRS Brake Conversion
  • ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
  • ✓ connection 1 M10x1 external thread bent
  • ✓ connection 2 M10x1 internal thread straight
  • ✓ length 57cm  / transparent covered

€86.20*
Artikelnummer: SF110
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Artikelnummer: LK1
EBC Brake Pads Redstuff Front Porsche Boxster Cayman 2.5 2.7
  • ✓ assembly position: front
  • ✓ suitable for Porsche Boxster Cayman 2.5 2.7

€153.85*
Artikelnummer: DP31207C
EBC brake pads Yellowstuff front axle Porsche Boxster Cayman 2.5 2.7

€193.93*
Artikelnummer: DP41207R
Complete Kit Rear Golf MK3 Porsche + S3 5-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32
  • ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
  • ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
  • ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
  • ✓ brake disc: Passat 35i   280mm 

€394.80*
Artikelnummer: 678-5L
VW Golf Scirocco Corrado VR6 16V Brake Caliper Adapter S3 R32 Brake System - 5 Holes
  • ✓ for rear axle: Golf 1, Golf 1 Cabrio, 2, 3, GTI, VR6, Caddy 14d, Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
  • ✓ brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
  • ✓ brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
  • ✓ brake disc: VR6 280x22mm, VW reference 1H0615301A

€226.27*
Artikelnummer: 344-5L
You can find out everything about your order via your -> View customer account