You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Mercedes Benz E63 W212 CLS 63 W218 ceramic 402x39mm brake system Mercedes Benz 6-piston brake caliper adapter

€194.31*

Available
Delivery by Wednesday, 15.05.2024 if you order within the next 2 Hours.
Product number: 963
Weight: 2.884 kg
Einbauort: vorne
Material: Stahl (hochfest)
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie

Brake calipet adapter, front axle, on models Mercedes Benz E63 W212 and CLS63 W218, for conversion to the Mercedes Benz Ceramic brake discs 402x39, combined with the Mercedes Benz 6-piston W205, W213, C190 brake calipers.zu.

Since the original Mercedes brake caliper bracket is not available for purchase individually, but only in conjunction with the 6-piston calipers, we have developed this adapter..  

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • easy assembly
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • brake caliper: Mercedes W197 SLS W205 C63 AMG 6-piston, reference A204 421 99 98 and A204 421 97 98 or 2124219798 and 2124219998
  • brake disc: ceramic brake disc from Mercedes CLS 63, 402x39mm, front axle,  reference : 231 421 15 12 / 231 421 16 12

Delivery:

  • 2x brake caliper adapters for Mercedes Benz E63 W212 CLS 63 W218
  • complete screw kit
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.Jetzt direkt zu >> Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

3 of 3 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


28 June 2022 09:21

Sascha D

Absolut hochwertiges Produkt , Verarbeitung, Schrauben . einfach top Passt alles perfekt, bin auch mehr als zufrieden mit der netten und kompetenten und Fachmännischen Beratung. Man fühlt sich gut beraten und aufgehoben , immer wieder gerne 5 Sterne + Und das Ergebnis nach dem bremsen Upgrade, einfach Wahnsinn

28 June 2022 09:05

Sascha D

Absolut hochwertiges Produkt , Verarbeitung, Schrauben . einfach top Passt alles perfekt, bin auch mehr als zufrieden mit der netten und kompetenten und Fachmännischen Beratung. Man fühlt sich gut beraten und aufgehoben , immer wieder gerne 5 Sterne + Und das Ergebnis nach dem bremsen Upgrade, einfach Wahnsinn

13 December 2019 07:23

Simon S

Sehr gut verarbeitet Der Support im Vorfeld war sehr gut. Man hatte vorallem jemanden am Telefon der wusste wovon er redet und man wurde sehr gut beraten

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Artikelnummer: SF1
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Artikelnummer: LK1
You can find out everything about your order via your -> View customer account