Engine & gearbox mounting brackets
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ Engine: Basis Golf 4 Audi A3 etc.
- ✓ Gearbox: 5-speed 02A / 02J based on Golf 3 and 4
Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.
- ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
- ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento
- ✓ for all VW T2, T3 bus transporter
- ✓ engine: to 1,9l TDI (116 HP) AFN
Motor cradle for engine exchange.For installation of 1,8T engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.
Engine and gearbox mounting bracket kit, in order to install a control cable gearbox 02A/02J for conversion to VR6 or G60 engine im Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ for Golf MK1 series, also Caddy 14d Corrado Scirocco Jetta
- ✓ engine: 4 cylinder engines, basis from Golf MK3 and MK4
- ✓ for Golf MK1 Cabrio Caddy 14D
- ✓ engine: based on Golf MK3, Golf MK4 Audi A3 etc.
- ✓ gearbox: 5 speed 02A/02J/CDA gearbox , based on Golf MK3 and MK4
- ✓ suitable for VW Golf MK1, Scirocco und Caddy 1
- ✓ complete conversion set to convert to the 02A / 02J gearbox, combined with the 1,8T / 1,9TDI engine from VW Golf MK4
- ✓ for Golf MK2, MK3, for example Passat Corrado Jetta
- ✓ gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6
- ✓ gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado
- ✓ mounting bracket / holder / support for conversion to 012 VW / Audi 5-speed gearbox on model VW T3 transporter
- ✓ engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine
- ✓ for BMW E36 and E46
- ✓ for conversion to turbocharger
- ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ gearbox: 5 speed 02A/02J, based on Golf MK3 and MK4
- ✓ getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2 MK3, Vento
- ✓ bearing block / bracket, gear mounting brakcet for Golf MK1 Jetta Scirocco Caddy 14d
- ✓ front engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 motor
- ✓ Front sheet metal support VW Golf MK2 MK3 VR6 G60 Jetta Passat Corrado to get more space to install a larger radiator
- ✓ for all T3 bus / transporter with diesel engine from Yoc 84
- ✓ hydromount / hydraulic bearing for all T3 bus / transporter with diesel engine from Yoc 84 and as manufacturer reference for Toledo, Golf MK3, etc
Motor cradle for engine exchange.For installation of engine Opel 8V & 16V typ C20Xe C20Ne C20LET X18XE X20XEV on Corsa A.
- ✓ 1x engine mounting bracket for 1,8 2,0l from Audi A3 Golf 4 engine
- ✓ 1x kit 02A / 02J 5-speed gearbox mounting bracket for VW Polo 6N Lupo
- ✓ 1x pendulum support adapter
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ VAG 4 cylinder engines from 1.8T G60 1.9TDI
- ✓ Gearbox: 6-speed 02M from base Golf 4 R32
Motor cradle for engine exchange.For installation of G60 engine in your VW Golf 1 / Caddy 14d / Scirocco vehicle.
Easy engine swap with our complete engine and gearbox mounting bracket kit. These bracket make possible the installing of 1,9TDI 1,8l ABF G60 and 2.0 L engines in your VW Golf MK1 / Caddy 14d / Scirocco Jetta 1 & 2.
- ✓ reinforced gearbox mounting bracket / support for VW Golf Mk2, Passat, Corrado, Jetta, Vento to install the 5-speed gearbox 02A / 02J
- ✓ for Golf MK2, MK3 series, e.g. Passat Corrado Jetta
- ✓ gearbox: 6 speed 02M , based on Golf 4 R32 / V6
- ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ engine: 16V engine from,e.g., Golf MK2
- ✓ manufacturer reference: 055199293G
- ✓ for Golf MK1 Baureihe, e.g. Cadyy 14d Corrado Scirocco Jetta
- ✓ gearbox: 5 speed 02A/02J gearbox, based on Golf MK3 and MK4
- ✓ for Manta B, Ascona B, Kadett C
- ✓ engine: 2,0l OHC 16V and 8V (C20NE , C20XE)
- ✓ engine mounting bracket to install the 1.8T engine (AEB) from the Audi A4 B5, Audi A6, VW Passat 3B in the Audi 80 B4
- ✓ for Golf MK1 series, e.g Caddy 14d Corrado Scirocco Jetta
- ✓ VAG 4 cylinder engines from 1,8T G60 1.9TDI
- ✓ gearbox: 6-speed DQ250 DSG based on Golf MK6, MK7 etc.
- ✓ for BMW E30, E36, or Z3
- ✓ engine: M30 / M5 (S38) from BMW E32 and E34 (3,0 and 3,5l from 5er and 7er)
- ✓ for Audi S2 RS2
- ✓ gearbox: 01E 6 speed gearbox from Audi S6 C4
- ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)
- ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc
- ✓ suitable for VW Golf MK1, Scirocco and Caddy I
- ✓ complete conversion kit for the 02A / 02J gearbox from the VW Golf MK3, combined with the 1.8L / 1.9TDI / G60 / 2.0L engine from the VW Golf MK3
- ✓ for Golf MK1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ gearbox: CDA, CTM and DPA
Complete engine and gearbox mounting bracket kit for Golf MK1, Caddy 14d , Scirroco 1 and Jetta. With our gearbox bracket, the CDA gearbox can be installed for a conversion to 1.8T engine on Golf models.
- ✓ engine mounting bracket for 1,8 2,0l engine from Audi A3 Golf MK4
- ✓ 1x kit 02M 6-speed gearbox mounting bracket for VW Polo 6n Lupo
- ✓ 1x pendulum support adapter
- ✓ suitable for VW Golf MK1, Scirocco and Caddy 1
- ✓ complete conversion kit for conversion to the das 02A / 02J gearbox, combined with the VR5 20V or 10V AQN AGZ engine
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer
- ✓ steering angle limiter / turning angle reducer
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 65,10 mm
- ✓ external diameter: 70 mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
- ✓ brake line screw adapter, suitable for internal thread M10x1,0 to internal thread M10x1,0
- ✓ external diameter 25mm
- ✓ internal diameter 13mm
- ✓ lenght 14,7mm
- ✓ material steel blank
-
Lochkreisadapter bestellt. passen einfach mega gut. top Qualität
Stephan Eznats aus Facebook
-
Habe Lochkreisadapter gekauft: Super Beratung, Top Qualität, alles bestens!
Timo Schwierzeck von Google
-
Schnelle Lieferung, wie immer alles sehr passgenau und gut durchdacht. mehr gibt`s hier nicht zu sagen. Absolut Empfehlenswert, egal bei welchem Umbau.
Roy Müller von Google
-
Echt super Passgenauigkeit und schnelle Lieferung zu Fairen Preisen!!
Philipp Steiner aus Facebook
-
Beste Adresse für spezial Adapter. Habe Lochkreisadapter von 4x100 auf 5x120 bestellt. Diese waren nach 3 Werktagen da und passten perfekt. Wenns speziell und top Qualität sein soll dann epytec. Werde immerwieder gerne bei diesem kompetenten und schnellem Team bestellen.
Günter Sölch von Google
-
Ich bin super zufrieden mit den Teilen von epytec. Gut verpackt, tolle Qualität und das ganze macht den TÜV Prüfer auch noch glücklich. Man findet viele etwas spezielle teile. Wirklich toll.
Jasmin W von Google
