You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter VW Passat 3C YoC 2017 Ceramic Brake Disc 4K0615302D Audi RS5/RS7 Brake Caliper Audi RS5/RS7 B40401-01 1A BMS VW AG

€263.47*

Available
Delivery by Tuesday, 30.04.2024 if you order within the next 13 Hours.
Product number: 1052
Weight: 2.573 kg
Einbauort: vorne
Material: Stahl (hochfest)
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie

Brake caliper adapter on models VW Passat B6 B7 B8, for conversion to the Audi RS5 / RS7 ceramic brake system.

Suitable for the following vehicles with installed wheel bearing housing, reference 3C0 407 253F:

  • VW Passat B6 3C
  • VW Passat B6 Variant 3C5
  • VW Passat B6 CC
  • VW Passat B7 Variant
  • VW Passat B7 Alltrack
  • VW Passat B8
  • VW CC B7
  • VW Sharan

Advantages of this brake system:

  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

  • brake caliper: Audi RS7 A7 RS5, reference 4H0615107D / 4H0615106D
  • brake disc: ceramic Audi RS5 400x38mm, reference 4K0615302D

Delivery:

  • 2x brake caliper adapters for VW Passat B6 B7 B8 CC Sharan
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu Prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Artikelnummer: LK1
Steel Brake Line Steel Brake Line Custom Configurator

€46.95*
Artikelnummer: SF1
1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
You can find out everything about your order via your -> View customer account