- ✓ for front axle: Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco
- ✓ brake caliper: Girling/Lucas 54 G60
- ✓ brake disc: G60 280x22mm , reference 535615301
- ✓ for rear axle: Golf MK5 Mk6, Audi S3 8P Seat Leon Cupra Altera
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche caliper) Brembo left 20.7673.03 / right 20.7673.04
- ✓ rear brake caliper for handbrake: Golf MK5 R
- ✓ brake disc: original Golf 5 R 310x22 mm , reference 1K0 615 601 N
Braking force regulator for conversion of brake disc system on Golf 1.For the installation of Golf 2/3 G60 V16 brake disc system on rear axle of the above mentioned vehicle.
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
- ✓ suspension control arm / wishbone Golf MK4, Audi S3, Audi TT, VW Bora, Seat Leon, etc.
- ✓ for Golf 1 series, e.g. Caddy 14d Corrado Scirocco Jetta
- ✓ Engine: Basis Golf 4 Audi A3 etc.
- ✓ Gearbox: 5-speed 02A / 02J based on Golf 3 and 4
- ✓ bush / bushing / sleeve for the 5th BMW series 520i E9 axle stub , steering rod link, control arm, front left right
High resistant rubber bearing kit for engine and gearbox.For installation on Golf 1. Perfect for motor conversion on VR6 or V16 engine.
Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- ✓ bush for wishbone / control arm on 5er BMW series E39 axle stub, wheel bearing housing front left right
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
- ✓ for front axle: Audi A3, TT, Golf MK4, Bora, Beetle, Polo, Seat Ibiza, Leon
- ✓ brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 + 95535142253
- ✓ brake disc: R32 334x32mm
- ✓ for front axle BMW: 1, 2 series F20, F21, F22 and F23, as well as the 3 and 4 series F30, F31, F32, F33, F34, F36
- ✓ brake caliper: BMW F20 M 4-piston, reference left 34116799465 / right 34116799466
- ✓ brake disc: BMW M2 M3 M4, front axle, 380x30mm, reference left 34112284809 / right 34112284810
- ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage
- ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ intake manifold conversion kit on BMW E36 2.8i models to install a manifold of BMW M50 M52 models.
- ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
- ✓ conversion to mechanical clutch
- ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
- ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- ✓ for e.g. VW Golf MK5 MK6 MK7 Audi A3 etc...
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 63 cm / transparent covered
- ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
- ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
- ✓ rim centric ring / extension bush, high-strength steel, for VW Golf MK4 Polo 9N Bora Audi A3 TT
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
- ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.
- ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.
Short shifter in stainles steel.Tailor-made for VW vehicles with cylinder capacity from 1,5 ltr on as Golf 1, Jetta 1, Caddy 14d , Scirocco 1 and 2.
- ✓ steering angle limiter / turning angle reducer suitable for all BMW E30 and E36
- ✓ for all BMW with M50 M52 and M54 engines installed in:
- ✓ BMW 3 Series 320i 325i 323i 328i ( E36 )
- ✓ BMW 3 Series Compact 323ti ( E36 )
- ✓ BMW 3 series coupe 320i 323i 325i 325is 328i ( E36 )
- ✓ BMW 3 series convertible 320i 323i 325i 328i ( E36 )
- ✓ BMW 3 Series Touring 320i 323i 328i ( E36 )
- ✓ BMW 3 Series 320i 323i 325i 325xi 328i 330i 330xi ( E46 )
- ✓ BMW 3 Series Compact 325ti ( E46 )
- ✓ BMW 3 Series Coupe 320Ci 323Ci 325Ci 328Ci 330Ci 330xi ( E46 )
- ✓ BMW 3 Series Convertible 320Ci 323 Ci 325Ci 330Ci ( E46 )
- ✓ BMW 3 series Touring 320i 325i 325xi 328i 330i 330xi ( E46 )
- ✓ BMW 5 series 520i 523i 525i 528i 530i ( E39 )
- ✓ BMW 5 series Touring 520i 523i 525i 528i 530i ( E39 )
- ✓ BMW 5 series 520i 24V 525i 24V 525ix 24V ( E34 )
- ✓ BMW 5 series Touring 520i 525i 525ix ( E34 )
- ✓ BMW 5 series 520i 525i 530i ( E60 )
- ✓ BMW 5 series Touring 525i ( E61 )
- ✓ BMW 7 series 728i,iL ( E38 )
- ✓ BMW 7 series 730i, Li ( E65 E66 )
- ✓ BMW Z3 2.0i 2.8i ( E36 )
- ✓ BMW Z4 2.2i 2.5i 3.0i ( E85 )
- ✓ BMW X3 2.5i 3.0i xDrive ( E83 )
- ✓ Total weight: 5,8 kg / Savings compared to original: 6,2 kg
- ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
- ✓ 1.brake disc: 312x25
- ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
- ✓ 2.brake disc: 334x32
- ✓ conversion kit to hydraulic clutch Golf MK4
- ✓ suitable for VW Golf 1, Caddy 14D, Scirocco usw.
- ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Touareg reference. 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Mercedes 5x112 PCD 350x32mm reference : 164 421 05 12 + A 164 421 05 12
- ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento
- ✓ gas pedal / accelerator pedal adapter / trottle control adapter
- ✓ Golf MK1 Caddy Scirocco
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm.
- ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 57cm / transparent covered
- ✓ gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A for conversion to VR6 or G60 engine in Golf 1, Caddy 14d, Scirocco Jetta 1 & 2.
- ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento
- ✓ bush / spacer / washer/ adapter bushing to install the steering gear box from BMW E36, E46 and Z3 onto BMW E30
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 22mm
- ✓ internal diameter: 12mm
- ✓ length: 28mm
- ✓ material: steel-galvanized
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer diameter 24 mm
Fastening bracket for brake hose.
Fastening bracket for brake hose. Necessary for the conversion of your rear axle drum brake system