You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter VW Passat B8 Alltrack VW Arteon Skoda Supherb Ceramic Brake Conversion Audi R8 356x32 Brake Disc 4-piston Brake Caliper

€605.90*

Available again on 11.06.2024
Delivery by Tuesday, 11.06.2024 if you order within the next 0 Hour.
Product number: 1098
Weight: 7.946 kg
Einbauort: hinten
Material: Stahl (hochfest)
Your benefits
  • Einfache TÜV Eintragung
  • Qualität Made in Germany
  • Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
  • Weltweit Nr 1 in Sachen Tuning Adapter
  • 15 Jahre Expertenwissen
  • 10 Jahre Garantie
Brake caliper adapter, the rear axle, on models VW Passat 3G, Arteon, Skoda Superb 3 series with aluminum axle (manufacturer reference: 3Q0 505 436 M), for converstion to the Audi R8 ceramic brake system.

The 4-piston Audi R8 calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Audi R8 is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.

Suitable for the following VW and Seat models with aluminum axle, 3Q0505436M

  • VW Passat 3G
  • VW Passat 3C
  • VW Passat Alltrack
  • VW Arteon
  • Skoda Superb 3
  • Skoda Supherb 3station wagon

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • better performance
  • supplied material certificate

Required components:

  • brake caliper: 4-piston Audi R8, reference 209815 / 42615405
  • hand brake caliper: Audi R8 Brembo, reference  22.8274.03 / TRW reference : 53632
  • brake disc: original Audi R8 ceramic 356x32 mm, reference 420.615.602F

Delivery:

  • 1x set of brake caliper adapters for aluminum rear axle VW Passat 3C / 3G B8, Arteon, Skoda Supherb.
  • 2x matching centering rings
  • high-strength mounting screw material
  • material certificate

Tipps, Infos und Hinweise:

  • Bedingt durch die Postion des Bremssattels kommt der ABS Sensor in den Weg. Dieser muss entweder mit einer neuen Steckverbindung versehen oder direkt verlötet werden. Leider ist durch die bauartbedint, durch die Achse, eine andere Position des Bremssattels nicht möglich.
  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu Prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
  • Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den Längeren weg auszugleichen

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: hinten
Material: Stahl (hochfest)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
  • ✓ plates made of high-strength aircraft aluminum
  • ✓ with engraved logo on the plate and material certificate for easier registration

€96.00*
Artikelnummer: LK1
1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ lubricant developed by EBC itself
  • ✓ optimized for use on brake systems
  • ✓ exact viscosity for brakes
  • ✓ do not use standard lubricants on brake systems
  • ✓ for sliding pins, bolts, screws, bars on the brake calipers
  • ✓ never apply to the surface

€2.85*
Artikelnummer: LUBE001
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ EBC ultra-high performance brake fluid 500 ml
  • ✓ to reduce corrosion within the braking system

€37.30*
Artikelnummer: BF307
Adapter for Audi R8 Caliper to VW Golf MK3 MK4 Cable Hand Brake Caliper Handbrake Cable
  • ✓ hand brake cable adapter for conversion from R8 hand brake caliper to Golf MK3 MK4 hand brake cable 

€45.67*
Artikelnummer: 894
Steel Braided Brake Line VW Golf MK5 MK6 MK7 GTI R23 Audi A3 S3 V6 Brembo TTRS Brak Conversion Rear Axle
  • ✓ for e.g VW Golf MK5 / MK6 / MK7 Audi A3, etc
  • ✓ connection 1 M10x1 external thread bent
  • ✓ connection 2 M10x1 internal thread straight
  • ✓ length 63cm  / transparent covered

€98.40*
Artikelnummer: SF115
You can find out everything about your order via your -> View customer account