Bolt circle adapter VW 4x100 on 5x112 Audi 20mm Wheel plates
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
€66.00*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High resistant bolt circle adapter.Tailor-made for all VW with 4x100mm bolt circle and centering hole of 57,1mm.
Fits for any kind of Audi wheel rim with 5x112mm fixaton.
- Enlargement on each wheel : 20mm
- Enlargement of lane on axle : 40mm
- Mesure inner centering on bolt circle VW : 57,1mm
- Mesure outer centering on bolt circle Audi: 57,1mm
- Thread in adapter plate for wheel bolts: M14 x 1.5
All components are made of high-quality aluminum and steel alloy and all screws supplied are high-strength (10.9).
Technical information for installation:
Fix the delivered adapter with 3 screws on the wheel hub.The eccentric has to be fixed in the 4th hole and then adjusted in the right position to adapt it on bolt circle.
To finish fix the wheel rim with the 5 screws.This will give stability to the whole installation.
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Scope of delivery:
- 2x high resistant adapter for bolt circle conversion on one axle
- 2x high resistant eccentric
- 1x complet high resistant screw kit 10.9
- TÜV - certificate for registration
- Installation instructions
You will receive bolt circle adapters for one axle when your vehicle is fully equipped. Please buy the item 2x, the item is also available with a thickness of 25mm, so you can put together your set in the thickness you require.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 May 2019 20:56
Johniven F
Super es hat alles gut bei mir gepasst
16 July 2020 20:47
m.haramija2012
top seller!
10 August 2016 10:24
m-power-gz
Vielen Dank
18 April 2017 10:27
renngurke3
Super Ware super Kommunikation vielen Dank
3 January 2019 15:15
rusty.mopeds.made.in.garage
Blitzversand! Super Service! Sehr zu empfehlen! MfG
16 October 2016 19:10
bmw-e30-340i
Top ....super schnell versendet
8 April 2018 07:27
kevincolli1412
Alles Top...
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ 4x100 to 5x112
- ✓ 25mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J brake caliper
- ✓ front axle
- ✓ fall positive/negative
- ✓ 3mm thickness
- ✓ Suitable for VW: Corrado, Golf 2 +3, Jetta Passat 35i, Scirrocco, Vento, Polo 86c/6n/9n, Seat: Cordoba, Ibiza, Toledo
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality