VW Golf MK1 Cable Gearbox Bracket Caddy G60 VR6 1.8 T 02 J Transmission BracketEngine Conversion
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ G60 VR6 in Golf 1
€74.93*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Forward bracket for cable gearbox
Thanks to this bracket, you can perform a conversion to motor G60 or VR6 on Golf MK1, Caddy 14d , Scirroco 1 and Jetta models.
It is absolutely necessary to install an original 02A 02J gearbox in G60 or VR6 engine on the mentioned models.
The gearbox brackets are for the bearings of the Golf MK1, with a bearing diameter of 64mm.
Advantages:
- Simple and easy assembly for VR6 / G60 engine and gearbox.
- perfect anticorrosive protection, all our parts are galvanized.
- 100% fit
- screws are supplied
Delivery:
- 1x 02A 02J gearbox bracket for VW Golf MK1 Caddy G60
- mounting screws
- detailed installation instructions
- material certificate
Notes: For conversion, a second rearward bracket is required! You can find the complete kit in our shop.
For conversion to G60 and VR6 engine, we have in our shop engine brackets, chain tensioners and other parts.!
Login
16 March 2024 04:53
Heiko K
Hat problemlos gepasst
3 May 2019 10:04
simson2001nico
Perfekt !
27 February 2019 17:00
Alecsandru R
Prima ! Gute Kommunikation und schneller Versand
28 January 2023 22:20
karbasch.2008
ok
2 October 2019 21:04
Hans D
Perfekte kvalitet
5 August 2018 15:47
Daniel R
Passgenauer Halter, der die Möglichkeit gibt, die Kupplung noch passend einzustellen.
26 March 2020 07:30
Ken S
Bra passform og finish
27 February 2019 17:00
Alecsandru R
Prima ! Gute Kommunikation und schneller Versand
9 October 2017 17:06
koert80
gerne wieder
28 February 2019 08:32
Margitta K
Habe leider erst den falschen Halter gekauft, weil die Komponenten des anderen Halters mit denen identisch sind, er aber zu kurz ist . Der aktuelle Halter passt perfekt, also bin ich zufrieden.
- I can't get the clutch cable to attach to the transmission mount, what do I have to do?
It can happen that the gearshift tower (no. 3 image) is next to the transmission mount. In this case, you will not get the clutch cable holder (no. 1 image) mounted correctly and the clutch cable (no. 2 image) will not be mounted either.
In this case, we can offer you the following solution.
With our counterholder for the clutch cable, you can avoid exactly this problem. In this case, you do not need to fit the small bracket for the clutch cable above (no. 1 image), but can simply use our counter bracket (click here). This is installed as shown in the picture:
As soon as the counterholder (click here) is fitted, you have created the necessary space to be able to fit the clutch cable correctly.
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.
- ✓ 320x22
- ✓ 75mm centering
- ✓ 80mm height
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Original VW part
- ✓ length 1.05 m
- ✓ OE NR: 171721335D
- ✓ Release lever reinforced
- ✓ G60, VR6, 2L 16V, GTI, TDI, Corrado, Golf 2/ 3, Passat
- ✓ 02A/02J gearbox
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ CDA/CTM/DPA 5-speed transmission, 1.8T/1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ VW G60, 1.9TDI, 16V ABF, G60 1.9TDI engine code 1Z
- ✓ Golf 1, Caddy 14D, Scirocco
- ✓ simple engine conversion
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, 1.8L / 1.9TDI / G60 / 2.0L engine
- ✓ Reinforced engine and transmission mounts
- ✓ Original VW part
- ✓ G60 VR6 in Golf 1
- ✓ OE NR: 02A141708B
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, 1.8T / 1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Scirocco, Caddy 14D
- ✓ 1.8l 20vT, 1.9 TDI
- ✓ simple engine conversion
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ G60 VR6 in Golf 1
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ CDA/CTM/DPA 5-speed gearbox, 1.9TDI / G60 / ABF / 2.0L engine
- ✓ Reinforced engine and transmission mounts
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J/EBA transmission
- ✓ VR5 20V and 10V AQN AGZ motors
- ✓ Timing belt tension pulley
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, VR5 20V/ 10V AQN AGZ engine
- ✓ original pedals
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ CDA CTM DPA gearbox
- ✓ 1.8T, VR6 16V TDI
- ✓ cast noses
- ✓ engine mounting
- ✓ Repair sheet metal
- ✓ Golf 1 gearbox / engine mount
- ✓ OEM no.: 171 199 151A
- ✓ reinforced Shore 68
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ CDA, CTM, DPA gearbox, 1.8T 20V engine
- ✓ simple engine conversion
- ✓ Golf 1 engine mount
- ✓ OEM number: 171 199 339
- ✓ reinforced Shore 68
- ✓ 74.5mm diameter
- ✓ OEM no.: 171 199 214G
- ✓ reinforced Shore 68
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ 1.8 2.0.19TDI G60 in Golf 1
- ✓ 65mm diameter
- ✓ OEM number: 171 199 214D
- ✓ reinforced Shore 68
- ✓ Golf 1, Caddy 14d, Scirocco Jetta 1 & 2
- ✓ 02A gearbox from G60 or VR6 engine
- ✓ Bearing 64mm
- ✓ VW Golf 1 Caddy
- ✓ 1.9TDI, G60, ABF, 2.0L
- ✓ CDA CTM DPA gearbox
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/02J/EBA gearbox
- ✓ VR5 20V and 10V AQN AGZ motors
