VW Gearbox Mounting Bracket Cable Gearbox Golf MK1 Caddy G60 VR6 1,8T Engine Conversion Gearbox
- ✓ Golf 1, Caddy 14d, Scirocco Jetta 1 & 2
- ✓ 02A gearbox from G60 or VR6 engine
- ✓ Bearing 64mm
€86.43*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Gearbox mounting bracket kit, in order to install a control cable gearbox 02A/ for an easy and time savings conversion to VR6 or G60 engine into Golf MK1, Caddy 14d, Scirocco Jetta 1 & 2.
It is absolutely necessary in order to install an original gearbox 02A from G60 or VR6 engine, in Golf MK1 Caddy 14d, Scirocco Jetta 1 & 2!
The gearbox mounting brackets are for the bearings of the Golf MK1, with bearing outside diameter of 64mm.
Advantages:
- quick and easy conversion to VR6 /G60 engine and gearbox.
- reinforced equipment .
- top German quality product
- excellent corrosion protection. All parts are supplied galvanized.
- adapted to 100%
- screws are supplied
Delivery:
- 1x 02A gearbox mounting bracket kit for VW Golf MK1 Caddy G60
- mounting screws
- detailed installation instructions
- delivered with complete screw kit
Not suitable for the CDA gearbox.
For conversion to G60 and VR6 engine, we offer in our shop engine brackets, chain tensioners and other parts.
Login
14 December 2019 12:48
Pierre-yves C
vraiment de la tres belle pieces ,finition parfaite ...bravo encore mieux que je l imaginais
19 February 2021 13:00
Angelo P
Ottimo prodotto
12 November 2023 08:02
Rene V
Halter passen perfekt,wie immer. Danke...
9 August 2021 21:45
David H
Artículo Epytec 100% motor 1.9tdi vw golf mk1, recomendado, vendedor 100%, buena comunicación
3 June 2017 00:35
pepjoslop
Excelente calidad de los artÃculos, gran vendedor!
4 November 2018 13:47
sciroccoshome
Schnelle Lieferung !
15 July 2021 12:31
el_davi_soy
Envío muy rápido, 2 semanas a las Islas Canarias, sin gastos de aduana, material 100%, calidad Epytec, muy buena comunicación con el vendedor, muchas gracias, recomendado 100%
2 February 2020 18:32
Markus H
Top qualität. Würd ich sofort wieder kaufen für den umbau vom Original motor zum AFN.
12 May 2021 13:53
Lukas L
Perfectly fits. Very happy. Also super fast shipping. Greetings from Lithuania :))
10 December 2023 23:17
Gonçalo M
Recomendo este artigo, aplicação fácil e instalação perfeita
- I can't get the clutch cable to attach to the transmission mount, what do I have to do?
It can happen that the gearshift tower (no. 3 image) is next to the transmission mount. In this case, you will not get the clutch cable holder (no. 1 image) mounted correctly and the clutch cable (no. 2 image) will not be mounted either.
In this case, we can offer you the following solution.
With our counterholder for the clutch cable, you can avoid exactly this problem. In this case, you do not need to fit the small bracket for the clutch cable above (no. 1 image), but can simply use our counter bracket (click here). This is installed as shown in the picture:
As soon as the counterholder (click here) is fitted, you have created the necessary space to be able to fit the clutch cable correctly.
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.