Bearing Bracket Gear Mounting Bracket Rear 171 399 141 A VW Golf MK1 Caddy Scirocco G60 VR6 1,8T AGU Engine Conversion Gearbox Support 02J 02A CDA
- ✓ Golf 1, Scirooco, Jetta, Caddy 14D
- ✓ 5-speed 02J 02A CDA, 6-speed 02m 02Q, DQ250 gearbox
- ✓ 171399141A /171 399 141
€112.26*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Rear transmission / gear bracket / bearing block: it replaces the original part number 171 399 141 A and the number 171 399 141.
In the Golf 1 and similar vehicles, such as the Scirocco Caddy 14d and Jetta, there were two different bearing blocks, depending on the engine, which are screwed directly onto the body. It is now difficult or impossible to purchase these!
We have therefore developed a bearing block that replaces both versions. It is particularly important to have flexibility with various engine and gearbox conversions, as sometimes the gearbox is better positioned further backward and sometimes better further forward.
With our EPYTEC bearing block you are flexible in your choice and can use both versions.
Thanks to the axial rubber bearing and the height-adjustable U-socket, we achieve perfect performance. The engine tilts less over and the body is still ideally protected.
Suitable for all conversions in the Golf MK1, Scirocco, Jetta and Caddy 14d.
Our EPYTEC bearing block can be used for original conversions as well as for the conversion to a G60, 1.8T or VR6 engine in the Golf 1, Caddy 14d, Scirroco 1 and Jetta in conjunction with 5-speed gearboxes 02J 02A CDA, 6-speed gearboxes 02m 02Q and the DQ250 gearbox.
Advantages:
- better performance thanks to the axial rubber bearings
- suitable for all conversions
- variable depending on the gearbox type, it replaces two bearing blocks in one.. Original part number 171 399 141 A and 171 399 141
- reinforced version with 3 / 5mm material thickness
- quick and easy conversion
- best corrosion protection, as all parts are delivered galvanized
- 100% fitting
- screws are supplied
Delivery:
- 1x bearing block gear mounting brakcet for Golf MK1 Jetta Scirocco Caddy 14d
- U-socket, which replaces the original gearbox and is adjustable in height
- required screw material
- rubber bearing
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
9 November 2020 09:10
Franco B
Top produkt. Passgenau und sauber zum einstellen
25 October 2020 09:41
Franco B
Gute verarbeitung und passgenaugigkeit
2 February 2022 11:11
Marc Patrick B
Alles top
25 January 2021 17:25
Steffen S
Qualitativ sehr hochwertig
6 March 2022 12:13
Patrick K
Sehr gutes Material. Gut verarbeitet. Sehr zufrieden. Die Leute die für den Versand und Verpackung zuständig sind sollten etwas das Hirn einschalten. Sowas von nicht gut verpackt habe ich schon lange nicht mehr gesehen.
25 October 2020 19:44
Franco B
Gute verarbeitung und passgenaugigkeit
3 June 2022 08:44
Carsten H
Der Halter kam schnell und gut verpackt. Stabilität, Idee und Verarbeitung sind gut. Man könnte konstruktiv noch etwas an der Biegeentlastung ändern(Jammern auf hohem Niveau). Ich habe den Halter zurück schicken müssen, da er bei nicht gepasst hat (nicht weiter tragisch, da jeder Umbau anders ist). Retour Abwicklung scheint soweit auch unkompliziert. Grüße
- For which original bearing block is the Epytec suport/adapteur designed?
The Epytec support / adapter is intended to replace the original suport with part number 171399141A for so-called "small" engines up to 1.6 L engine. If you installed the original support with part number 171399141 , this must be replaced by the upper support with the end A connector.
- ✓ Reinforced version
- ✓ 02A 02J gearbox
- ✓ 1.8 2.0.19TDI G60 in Golf 1
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
- ✓ 1.8T, 1.9TDI, G60
- ✓ VW G60, 1.9TDI, 16V ABF, G60 1.9TDI engine code 1Z
- ✓ Golf 1, Caddy 14D, Scirocco
- ✓ simple engine conversion
- ✓ Golf 1, Scirocco, Caddy 14D
- ✓ 1.8l 20vT, 1.9 TDI
- ✓ simple engine conversion
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ CDA/CTM/DPA 5-speed transmission, 1.8T/1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, 1.8T / 1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, 1.8T / 1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, 1.8L / 1.9TDI / G60 / 2.0L engine
- ✓ Reinforced engine and transmission mounts
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ CDA/CTM/DPA 5-speed gearbox, 1.9TDI / G60 / ABF / 2.0L engine
- ✓ Reinforced engine and transmission mounts
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, 16V ABF 1.8T 1.9TDI, G60
- ✓ original pedals
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox, VR5 20V/ 10V AQN AGZ engine
- ✓ original pedals
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02A/02J 5-speed gearbox
- ✓ VR6 R32 engine and drive shaft conversion
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, 1.8T / 1.9TDI engine
- ✓ Front-wheel drive, transmission conversion, original pedals
- ✓ 16V 1.8T engine conversions
- ✓ OE No. 171407182
- ✓ Premium quality
- ✓ cast noses
- ✓ engine mounting
- ✓ Repair sheet metal
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, 1.8T / 1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, VR6/R32 V6 1.8T engine
- ✓ All-wheel drive
