Thin Drive Shaft Set VW Golf MK1 Scirocco 1 Caddy Jetta Joint Set G60 Axle Joint 90. Transmission Flange
- ✓ Front axle
- ✓ Golf 1, Scirocco 1, Jetta, Caddy
- ✓ G60, 1.8 T 1.9 TDI, 90s gearbox flange
€410.94*
Name | Title | Surcharge |
---|---|---|
Chassis number: |
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Thin drive shaft set on models VW Golf MK1, Scirocco 1, Jetta, Caddy, for conversion to G60 and 1,8T, with a 90th gear flange.
Absolutely necessary when lowering! The shafts are 26mm thick, made from one piece of high-strength steel and are solid shafts, so they are also suitable for high-performance engines.
Suitasble for following vehicles
- Golf MK1
- Scirocco 1 ( 53B )
- Jetta
- Caddy
Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering
It is important that when installing the new drive shaft, there is no overpressure in the sleeve. In our installation instructions you can see how you can prevent this (click here)
With the installation of our drive shaft, you avoid many modifications and you save time.
Delivery:
- 1x thin adrive shaft / solid shaft including joint kit / axle joints for Golf MK1, Scirocco 1, Jetta, Caddy um auf G60 und 1,8T umzubauen
Our drive shafts are free of registration and therefore do not have to be registered.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
21 January 2022 09:01
Fernando S
Muito bom este equipamento
- What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
- Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
- Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
- Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.