VW Golf MK1 Fine Thin Drive Shaft Left Scirocco 1 Caddy Jetta Axle Joint Lowered Vehicles
- ✓ Front axle left
- ✓ Golf 1 Cabrio, Scirocco 1, Caddy Jetta
- ✓ Registration free
£174.30*
| Name | Title | Surcharge |
|---|---|---|
| Chassis number: |
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Fine thin drive shaft for VW Golf MK1, Scirocco 1, Jetta, Caddy, etc. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.
Suitable for the following vehicles:
- Golf MK1
- Scirocco 1 ( 53B )
- Jetta
- Caddy
The drive shaft is significantly thinner than the original with the same / higher stability. Thereby the body must be no longer modificated and the vehicle can be placed much lower.
It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).
With the installation of our drive shaft, you avoid many modifications and you save time.
technical data:
| assembly side: | front axle right |
| length: | 537,5 mm |
| thread: | M20x1.5 |
| seal ring diameter;: | 53,0 mm |
| PCD-Ø: | 78 mm |
| joint diameter gear side: | 94,0 mm |
| number of drill holes: | 6 |
| external toothing wheel side: | 22 |
| chassis: | for vehicles with low-profile chassis |
| for drive shaft diameter: | 24,0 mm |
| joint diameter wheel side: | 81,0 mm |
Delivery:
- 1x fine drive / transmission shaft / solid shaft inclusive axle joint / fo Golf MK1, Scirocco 1, Jetta, Caddy, etc.
Our drive shafts are registration-free and therefore do not have to be registered.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
31 August 2018 21:40
tuning-world
Alles ok, gerne wieder ! Passt super...
16 October 2018 05:13
evilslayer666
Super Ware ! Alles Top gerne wieder!
- Does the drive shaft have the 90mm flange on the transmission or the 100mm
The drive shaft has the 90mm flange on the gearbox
- What exactly is the benefit of a shorter drive shaft?
Lowering changes the axle geometry and the shaft presses on the wheel bearing, exposing it to high wear and possibly destroying it in the worst case. Therefore, it is absolutely necessary to relieve the pressure from the component. This is done by shortening the shafts.
- Do the reinforced drive shafts also have reinforced joints?
On the wheel side, the joints are also reinforced, but the inner joints are like the standard joints.
- Why are two bags of grease included in the package?
The grease is included so that additional greasing can be done, or if the gearbox flange is open at the back. In this case, greasing must still be done there. If the shaft is delivered completely closed, greasing is not necessary as it has already been done.
- Why are no backing plates (OE: 1K0407357D) included for mounting as they are originally available?
We do not supply the base plates, as we install the latest version of the bellows. With these, the base plates are no longer needed.
- What is the length of the drive shaft?
If you want to know the length of our drive shaft, please first look directly at the product description of the respective item. If a shaft measurement is specified there, you will find the length exactly at this point (as a pure shaft measurement).
For some drive shafts, no shaft measurement is provided in the product description. In these cases, the design of the shaft is entirely guided by the components and installation conditions described in the article. This means: The drive shaft is 100% suitable if the conversion is carried out exactly as described in the article – with the mentioned combination of axle, engine, transmission (and the other specifications from the description).
Additionally important: For many drive shafts, we require the vehicle identification number (VIN), which must be provided to us. Thus, after the order, we have a clear assignment and can ensure that you receive exactly the drive shaft that perfectly fits your vehicle and setup.
| Motor | Motorcode |
|---|---|
| 1.8 GTI | 17|112PS(82KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.1 | 17|50PS(37KW) |
| 1.5 | 17|70PS(51KW) |
| 1.6 GTI | 17|110PS(81KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 16|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 14|75PS(55KW) |
| 1.6 D | 14|55PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|95PS(70KW) |
| 1.6 | 155|75PS(55KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.8 | 53B|95PS(70KW) |
| Motor | Motorcode |
|---|---|
| 1.8 GTI | 17|112PS(82KW) |
| 1.6 D | 17|54PS(40KW) |
| 1.1 | 17|50PS(37KW) |
| 1.5 | 17|70PS(51KW) |
| 1.6 GTI | 17|110PS(81KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 16|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 14|75PS(55KW) |
| 1.6 D | 14|55PS(40KW) |
| Motor | Motorcode |
|---|---|
| 1.5 | 155|70PS(51KW) |
| 1.8 | 155|95PS(70KW) |
| 1.6 | 155|75PS(55KW) |
| 1.8 | 155|90PS(66KW) |
| 1.8 | 155|112PS(82KW) |
| Motor | Motorcode |
|---|---|
| 1.8 | 53B|95PS(70KW) |
- ✓ Front axle right
- ✓ Golf 1 Cabrio, Scirocco 1
- ✓ registration free
- ✓ Front axle right
- ✓ Golf 1 Cabrio, Scirocco 1, Caddy Jetta
- ✓ Registration free
- ✓ Brake force regulator 3/15
- ✓ conversion to G60 16V VR6
- ✓ OE NO: 486145
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ Registration free
- ✓ For shift linkage
- ✓ stainless steel
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
- ✓ 1.8T, 1.9TDI, G60
- ✓ For Golf 1 Caddy
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:VW 1J1721503E
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ Golf 1, Scirocco, Caddy 14D
- ✓ 1.8l 20vT, 1.9 TDI
- ✓ simple engine conversion
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ mechanical tension roller
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.