VW Golf Scirocco Corrado VR6 16V Brake Caliper Adapter S3 R32 Brake System - 5 Holes
- ✓ for rear axle: Golf 1, Golf 1 Cabrio, 2, 3, GTI, VR6, Caddy 14d, Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
- ✓ brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
- ✓ brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
- ✓ brake disc: VR6 280x22mm, VW reference 1H0615301A
€226.27*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, with special wheel hubs on various VW and Seat models, for conversion to rear brake caliper from Golf 4 V6 / R32 Audi S3 8L (YoC 1999), combined with the front brake discs VR6 280mm.
Suitable for the following VW und Seat models:
- Golf MK1 (only with our axle pivot - see item No 313 in our shop)
- Golf MK2 MK3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
Technics:
Thanks to our wheel hubs (available with 4 or 5 holes according to the model) , the 280 mm brake discs are centered and screwed. The track is wider by about 6-8mm per side. The inside of the wheel hubs are manufactured like the originals and therefore the wheel bearing remains the same.
When the wheel hub must be modified to 4-hole, the brake discs must be re-drilled. This service is available from EPYTEC for 69 € per set (2 pieces).
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- better performance
- supplied material certificate
- very cheap spare parts
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
For the front axle, we propose brake caliper adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop!
Required components:
- brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
- brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
- brake disc: VR6 280x22mm, VW reference 1H0615301A
Delivery:
- 2x brake caliper adapters
- 2x wheel hubs for brake disc fixation, 5-hole
- material certificate
- Stress analysis / FEM calculation for entry
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
8 May 2018 11:56
David K
- maximum satisfied - the wheel hub can be galvanized - excellently processed product - fast delivery - the result is perfect - I only use epytec
8 June 2022 12:44
Marcel D
Wie immer Sehr passgenau top Qualität kann ich nur weiterempfehlen
12 December 2019 13:34
Herr V
Acabado y ajuste perfecto!
9 August 2019 09:24
Mads H
.
23 March 2023 15:53
Tino H
Top Leistung einfach plug&play
9 December 2020 19:56
Jean-Vincent L
Produkt in Übereinstimmung mit meinen Erwartungen, von guter Qualität.
31 October 2019 19:41
Christian L
Beste Qualität und Material Gutachten
23 March 2023 07:03
Cedric W
Passt perfekt
8 April 2024 17:33
Pedro F
Great product if you are looking for a easy and hassle free installation. The easiest way to have 280mm ventilated rear discs on your Corrado
23 February 2020 13:34
Tim D
Top, passt alles wunderbar
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Brake disc bolt circle drilling special design
- ✓ Drill an additional 2nd bolt circle in the brake disc
- ✓ Turn up hub diameter
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Bore 14mm
- ✓ 45 degree curved
- ✓ for welding
- ✓ For G60 16V brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ Length: 20cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 191598625 Golf 2 Polo Audi 80
- ✓ OE quality
- ✓ rear axle
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
