Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake line support

At Epytec, the combination of individuality and performance is at the centre of our tuning approach, which is also reflected in our range of brake hose holders. With over 15 years of experience in the development of tuning adapters, we ensure that our brake hose holders not only offer technical excellence, but also simplify the TÜV registration process. 

Manufactured in Germany, these products symbolise our commitment to quality and reliability. Our brake hose holders are available for a wide range of vehicle models and customisation needs, so you can be sure to find the perfect solution for your vehicle. 

Rely on Epytec to equip your vehicle with high-quality brake hose holders that optimise performance and safety.

Filter

Average rating of 4.8 out of 5 stars

Brake sleeve Polo G40 & 86C Brake system conversion G60/16V Brake system Brake caliper adapter
  • ✓ Conversion to 16V brake caliper
  • ✓ Polo handbrake cable
  • ✓ aluminum

€33.99*
Item number: 307
Braided Steel Brake Line Fixation Brake Hose Bracket Bent Curved Rubber
  • ✓ Bore 11mm
  • ✓ 90° bent
  • ✓ for welding/screwing

€6.80*
Item number: SF128

Average rating of 4 out of 5 stars

Braided Steel Brake Line Fixation Brake Hose Bracket Bent Curved Rubber
  • ✓ Bore 7mm
  • ✓ 90° bent
  • ✓ for welding/screwing

€7.50*
Item number: SF129
Braided Steel Brake Line Fixation Brake Hose Bracket Straight Rubber
  • ✓ Bore 8mm
  • ✓ straight
  • ✓ For welding/screwing on

€7.97*
Item number: SF126

Average rating of 5 out of 5 stars

Retaining Ring Supporting Ring Grommet Rubber Braided Steel Brake Line Brake Hose
  • ✓ Inner diameter 9mm
  • ✓ outer diameter 25mm
  • ✓ rubber ring

€3.20*
Item number: SF130
Retaining Holding Fixation Ring Grommet Rubber Steel Braided Brake Line Brake Hose
  • ✓ Inner diameter 7.5mm
  • ✓ outer diameter 24mm
  • ✓ rubber ring

€4.01*
Item number: SF131

Average rating of 5 out of 5 stars

Fixation Brake hose Brake system Bracket with borehole
  • ✓ Bore 11mm
  • ✓ 90 degree curved
  • ✓ for welding

€13.78*
Item number: 454

Average rating of 4.7 out of 5 stars

Fixation Brake hose Brake system VW Golf 1 Polo Scirocco G60 G40 16V rear axle brake
  • ✓ Bore 14mm
  • ✓ 45 degree curved
  • ✓ for welding

€20.99*
Item number: 446

Average rating of 5 out of 5 stars

Verteiler 3-Fach T Stück M10x1 Stahlflexleitung Bremsleitung Konkav Stahl Verzinkt
  • ✓ 3-way distributor
  • ✓ T-piece
  • ✓ flare shape F

€17.99*
Item number: SF132

Unisex Hoodie MK4 1,8T 20V

€54.72*
Item number: 576534288
Epytec Unisex Hoodie Boost

€74.30*
Item number: 578454210
Baseballkappe EPYTEC Logo

€20.19*
Item number: 576534488
Snapback Cap

€21.56*
Item number: 576536892
Bracket for Z18 Porsche 4-piston brake caliper rear 95535296000
  • ✓ Bracket for Z18 Porsche 4-piston rear brake caliper

€17.88*
Item number: 1183
Bracket 6 piston Porsche Panamera brake caliper 109-1660
  • ✓ 9P1698995
  • ✓ Anti-rust coating
  • ✓ 6-piston Porsche Panamera

€17.99*
Item number: 1180
Bracket Z17 ZR17 ZR18 Z18 6 piston Porsche brake caliper 608166000 7L0698269
  • ✓ 7L0698269 / 608165800
  • ✓ anti-rust coating
  • ✓ Porsche 6-piston Z17 ZR17 Z18 ZR18 brake caliper

€17.99*
Item number: 1182

Average rating of 4.7 out of 5 stars

Inner Cylinder Head Bolt with Hexagon Socket Normal Fine Thread Screw M5-M16 High-Strength 10.9 12.9 DIN912 8.8 Steel
select easily and quickly your inner cylinder head bolts with hexagon socket. Sortiment with lengths, quality and differents threads.

€0.56*
Item number: SK-INNENSECHSKANT

Average rating of 5 out of 5 stars

Verteiler 3-Fach T Stück M10x1 Stahlflexleitung Bremsleitung Konkav Stahl Verzinkt
  • ✓ 3-way distributor
  • ✓ T-piece
  • ✓ flare shape F

€17.99*
Item number: SF132
Blindstopfen Verschlussstopfen Bremssättel M10 Regelgewinde Bremsleitungsverschluss Umbau Bremse VM Audi Seat Opel Porsche
  • ✓ Thread M10x1.5
  • ✓ Perfect for separate handbrake caliper
  • ✓ Quick installation

€5.01*
Item number: 1164
Edelstahl-Buchse Ø Außen 18; Ø Innen 8; Länge 22
  • ✓ Inside: 8.0mm
  • ✓ Outside: 18mm
  • ✓ Length: 22mm
  • ✓ Stainless steel

€15.99*
Item number: BU-49
Edelstahl-Buchse Ø Außen 18; Ø Innen 8; Länge 10
  • ✓ Inside: 8.0mm
  • ✓ Outside: 18mm
  • ✓ Length: 10mm
  • ✓ Stainless steel

€13.99*
Item number: BU-46
steel bush Ø outside 22; Ø inside 11; Length 58.5
  • ✓ Inside: 11mm
  • ✓ Outside: 22mm
  • ✓ Length: 58.5mm
  • ✓ Bright steel

€15.60*
Item number: BU-43
stainless steel bush Ø outside 20; Ø inside 7; Length 18.5
  • ✓ Inside: 7mm
  • ✓ Outside: 20mm
  • ✓ Length: 18.5mm
  • ✓ Stainless steel

€15.17*
Item number: BU-17
Steel Bush Bushing Sleeve Ø External 19; Ø Internal 11; Length 9
  • ✓ Inside: 11mm
  • ✓ Outside: 19mm
  • ✓ Length: 9mm
  • ✓ Bright steel

€13.90*
Item number: BU-14
Aluminum bush Ø outside 21; Ø inside 10.5; Length 9.5
  • ✓ Inside: 10.5mm
  • ✓ Outside: 21mm
  • ✓ Length: 9.5mm
  • ✓ Aluminum

€10.07*
Item number: BU-13
Aluminum bush Ø outside 18; Ø inside 10.2; Length 15.875
  • ✓ Inside: 10.2mm
  • ✓ Outside: 18mm
  • ✓ Length: 15.875mm
  • ✓ Aluminum

€14.26*
Item number: BU-12
Aluminum bush Ø outside 18; Ø inside 10.2; Length 25.4
  • ✓ Inside: 10.2mm
  • ✓ Outside: 18mm
  • ✓ Length: 25.4mm
  • ✓ Aluminum

€15.97*
Item number: BU-11

Average rating of 5 out of 5 stars

Stainless Steel Bush Bushing Sleeve Ø External 16; Ø Internal 14; Length 20
  • ✓ Inside: 14mm
  • ✓ Outside: 16mm
  • ✓ Length: 20mm
  • ✓ Stainless steel

€13.29*
Item number: BU-10

Average rating of 5 out of 5 stars

Steel Bush Bushing Sleeve Ø External 19; Ø Internal 11 Length 22,5
  • ✓ Inside: 11mm
  • ✓ Outside: 19mm
  • ✓ Length: 22.5mm
  • ✓ Bright steel

€2.18*
Item number: BU-8
Bushing Ø outside 19; Ø inside 11; Length 11,45 Stainless steel V2A
  • ✓ Inside: 11mm
  • ✓ Outside: 19mm
  • ✓ Length: 11.45mm
  • ✓ Bright steel

€12.68*
Item number: BU-5

Average rating of 5 out of 5 stars

Steel Bush Bushing Sleeve Ø External 22; Ø Internal 12; Length 28
  • ✓ Inside: 12mm
  • ✓ Outside: 22mm
  • ✓ Length: 28mm
  • ✓ Bright steel

€9.53*
Item number: BU-1
Bushing Ø outside 19; Ø inside 11; length 12 Stainless steel V2A
  • ✓ Inside: 11mm
  • ✓ Outside: 19mm
  • ✓ Length: 12mm
  • ✓ Stainless steel

€7.29*
Item number: BU-2
stainless steel bush Ø outside 29; Ø inside 14,2; Length 39
  • ✓ Inside: 14.2mm
  • ✓ Outside: 29mm
  • ✓ Length: 39mm
  • ✓ Stainless steel

€16.99*
Item number: BU-37

Average rating of 5 out of 5 stars

Stainless Steel Bush Bushing Sleeve Ø External 20; Ø Internal 10,2; Length 5
  • ✓ Inside: 10.2mm
  • ✓ Outside: 20mm
  • ✓ Length: 5mm
  • ✓ Stainless steel

€13.17*
Item number: BU-34

Average rating of 5 out of 5 stars

Steel Bush Bushing Sleeve Ø External 22; Ø Internal 11; Length 57
  • ✓ Inside: 11mm
  • ✓ Outside: 22mm
  • ✓ Length: 57mm
  • ✓ Bright steel

€12.73*
Item number: BU-33
bushing stainless steel Ø outside 19; Ø inside 10.1; Length 20.5
  • ✓ Inside: 10.1mm
  • ✓ Outside: 19mm
  • ✓ Length: 20.5mm
  • ✓ Bright steel

€11.35*
Item number: BU-18

Average rating of 5 out of 5 stars

Steel/Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2; Length 1,5
  • ✓ Inside: 12.1mm
  • ✓ Outside: 25mm
  • ✓ Length: 1.5mm
  • ✓ Electrolytically galvanized steel

€2.60*
Item number: BU-20
Steel Bush Bushing Sleeve Ø External 22; Ø Internal 12,2; Length 34
  • ✓ Inside: 12.2mm
  • ✓ Outside: 22mm
  • ✓ Length: 34mm
  • ✓ Bright steel

€11.35*
Item number: BU-42
steel bush Ø outside 20; Ø inside 10.5; Length 9.5
  • ✓ Inside: 10.5mm
  • ✓ Outside: 20mm
  • ✓ Length: 9.5mm
  • ✓ Stainless steel

€10.13*
Item number: BU-40
stainless steel bush Ø outside 19; Ø inside 7; length 14
  • ✓ Inside: 7.0mm
  • ✓ Outside: 19mm
  • ✓ Length: 14mm
  • ✓ Stainless steel

€15.60*
Item number: BU-38
Bushing Ø outside 20; Ø inside 10,5; Length 12 Stainless steel V2A
  • ✓ Inside: 10.5mm
  • ✓ Outside: 20mm
  • ✓ Length: 12mm
  • ✓ Bright steel

€16.93*
Item number: BU-39
stainless steel bush Ø outside 29; Ø inside 14.2; length 27
  • ✓ Inside: 14.2mm
  • ✓ Outside: 29mm
  • ✓ Length: 27mm
  • ✓ Stainless steel

€18.64*
Item number: BU-36

Average rating of 5 out of 5 stars

Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal12,2; Length 0,5
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 0.5mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-31
Steel/Zincor bush Ø outside 25; Ø inside 10.2; length 0.5
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 0.5mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-30
Steel/Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 10,2; Length 1,0
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 1.0mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-29
Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2 Length 2,0
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 2.0mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-28
Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2, Length 0,75
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 0.75mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-27
Steel/Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 10,2; Length 0,75
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 0.75mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-26

Average rating of 3 out of 5 stars

Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2 Length 1,0
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 1.0mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-24
Steel/Zincor bush Ø outside 25; Ø inside 10.2; Length 1.5
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 1.5mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-23
Stahl/Zincor-Buchse Ø Außen 25; Ø Innen 10,2; Länge 2,0
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 2.0mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-22

Average rating of 3 out of 5 stars

Steel / Zincor Bush Bushing Sleeve Ø External 25; Ø Internal 12,2 Length 3,0
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 3.0mm
  • ✓ Electrolytically galvanized steel

€2.36*
Item number: BU-21

Average rating of 5 out of 5 stars

Stainless Steel Bush Sleeve Galvanized Ø external 25; Ø internal 12,2; Length 23,4
  • ✓ Inside: 12.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 23.4mm
  • ✓ Stainless steel

€12.56*
Item number: BU-35

Average rating of 4.8 out of 5 stars

Sticker Logo EPYTEC White Small 155mmx33mm
  • ✓ 155mmx33mm
  • ✓ Color: White
  • ✓ Highly weather-resistant

€1.63*
Item number: AUFKLEBER-103

Average rating of 4.8 out of 5 stars

Sticker EPYTEC Size white (325mmx70mm)
  • ✓ 325mmx70mm
  • ✓ Color: White
  • ✓ Highly weather-resistant

€3.84*
Item number: AUFKLEBER-104

Average rating of 4.5 out of 5 stars

Sticker EPYTEC white Size (325mmx70mm)
  • ✓ 325mmx70mm
  • ✓ Color: Black
  • ✓ Highly weather-resistant

€3.84*
Item number: AUFKLEBER-105

Average rating of 4.9 out of 5 stars

Sticker EPYTEC black Size (155mmx33mm)
  • ✓ 155mmx33mm
  • ✓ Color: Black
  • ✓ Highly weather-resistant

€2.18*
Item number: AUFKLEBER-102
Pilot Bearing Ball Bearing SKF Flywheel
  • ✓ pilot bearings
  • ✓ ball bearings
  • ✓ coupling

€14.70*
Item number: 1080

Average rating of 4.2 out of 5 stars

Hollow Screw Banjo Screw Adapter Oil Pressure Sensor Switch VW BMW Opel M10x1 M12x1,5 1/8 Inch
  • ✓ Oil pressure
  • ✓ banjo bolt
  • ✓ M10x1.0

€31.99*
Item number: 339

Average rating of 5 out of 5 stars

Steel Bush Bushing Sleeve Ø External 18; Ø Internal 11; Length 9,9
  • ✓ Inside: 11mm
  • ✓ Outside: 18mm
  • ✓ Length: 9.9mm
  • ✓ Stainless steel

€8.01*
Item number: BU-16
Elring Dirko HT Dichtmasse Umbau Motortuning EL00655383 Teilenummer: 190404517 FEBI S0413-21217 70ml
  • ✓ high-quality sealant
  • ✓ suitable for all vehicles
  • ✓ 190404517

€9.99*
Item number: 1160

Average rating of 4.7 out of 5 stars

Brake Pressure Regulator Brake Pressure Reducer Adjustable Braking Force Universal
  • ✓ Brake force regulator Infinitely variable
  • ✓ Perfectly adjustable braking effect
  • ✓ suitable for all vehicles

€80.80*
Item number: 662

Average rating of 4.7 out of 5 stars

Fixation Brake hose Brake system VW Golf 1 Polo Scirocco G60 G40 16V rear axle brake
  • ✓ Bore 14mm
  • ✓ 45 degree curved
  • ✓ for welding

€20.99*
Item number: 446

Average rating of 4.8 out of 5 stars

Brake hose Connection Adapter M12x1 auf M10x1 Braking force regulator
  • ✓ M12x1.0 external thread
  • ✓ M10x1.0 internal thread
  • ✓ V2A stainless steel

€15.02*
Item number: 396-DO-NI

Average rating of 4.9 out of 5 stars

Brake hose Connection Adapter M12x1 auf M10x1 Braking force regulator VW Opel
  • ✓ M12x1.0 external thread
  • ✓ M10x1.0 external thread
  • ✓ V2A stainless steel

€16.49*
Item number: 440

Average rating of 5 out of 5 stars

Brake hose Connection Adapter M10x1 auf M12x1 Braking force regulator VW Opel
  • ✓ M10x1.0 external thread
  • ✓ M12x1.0 internal thread
  • ✓ V2A stainless steel

€16.99*
Item number: 682

Average rating of 4.8 out of 5 stars

Brake Line Screw Adapter to M10x1 M10x1 Braking Force Regulator
  • ✓ M10x1.0 internal thread
  • ✓ M10x1.0 external thread
  • ✓ stainless steel V2A

€15.99*
Item number: 622

Average rating of 5 out of 5 stars

Fixation Brake hose Brake system Bracket with borehole
  • ✓ Bore 11mm
  • ✓ 90 degree curved
  • ✓ for welding

€13.78*
Item number: 454

Average rating of 5 out of 5 stars

VW Golf MK4 MK5 MK6 MK7 Audi A3 S3 TT Seat Skoda Tool Rim Mounting Rim Assembly M14x1,5
  • ✓ rim assembly
  • ✓ M14x1.5 on the wheel hub
  • ✓ precise centering

€20.09*
Item number: 916

Average rating of 4.7 out of 5 stars

VW Golf Audi A3 Passat Seat Skoda Opel Steering stop limiter Steering stop limiter Steering rod stainless steel
  • ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€34.99*
Item number: 1111

Average rating of 4.6 out of 5 stars

Steering stop limiter Steering stop limiter stainless steel VW Golf Audi A3 Opel Steering rod
  • ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles

€52.68*
Item number: 293
Steel/Galvanized Bush Bushing Sleeve Ø External 22; Ø Internal 12; Length 28
  • ✓ Inside: 12mm
  • ✓ Outside: 22mm
  • ✓ Length: 28mm
  • ✓ Galvanized steel

€14.99*
Item number: BU-6
Steel Bush Bushing Sleeve Ø External 25 Ø Internal 13 Lenght 14,7
  • ✓ Inside: 13mm
  • ✓ Outside: 25mm
  • ✓ Length: 14.7mm
  • ✓ Bright steel

€11.35*
Item number: BU-7
Stainless Steel Bush Bushing Sleeve Ø External 22; Ø Internal 12,1; Length 30
  • ✓ Inside: 12.1mm
  • ✓ Outside: 22mm
  • ✓ Length: 30mm
  • ✓ Stainless steel

€18.64*
Item number: BU-19
Steel/Zincor bush Ø outside 25; Ø inside 10.2; Length 3.0
  • ✓ Inside: 10.2mm
  • ✓ Outside: 25mm
  • ✓ Length: 3.0mm
  • ✓ Electrolytically galvanized steel

€1.39*
Item number: BU-25

Average rating of 4.9 out of 5 stars

Screw Hexagon Socket Normal Fine Thread M5-M16 High-Strengh 10.9 12.9 DIN933 8.8 Steel
  • ✓ DIN DIN933
  • ✓ size: M5-M16
  • ✓ length  10-120mm
  • ✓ high-strength

€0.51*
Item number: SK-SECHSKANT

Average rating of 4.9 out of 5 stars

Blanking Plug Sealing Plug Brake Caliper M10x1 Brake Line Lock Brake Conversion VM Audi Seat Opel Porsche Black Anodized Aluminum
  • ✓ sealing plugs
  • ✓ brake caliper
  • ✓ M10x1 brake line connector

€8.19*
Item number: 776

Average rating of 4.8 out of 5 stars

Gloves black size 9/L nylon assembly gloves PU coating

€4.24*
Item number: 001
Montagehilfe für Bremsscheibenmontage Befestigungshilfe M12x1,5 BMW VW Audi Mercedes Umbau Bremsanlage
  • ✓ Thread M12x1.5
  • ✓ ensures comfortable installation of your upgrade brake
  • ✓ makes work easier

€3.45*
Item number: 1205
Montagehilfe für Bremsscheibenmontage Befestigungshilfe M14x1,5 BMW VW Audi Mercedes Umbau Bremsanlage
  • ✓ Thread M14x1.5
  • ✓ ensures comfortable installation of your upgrade brake
  • ✓ makes work easier

€5.30*
Item number: 1204
%
Hub Centric Ring Brake Disc Centering VW T5 T6 Transporter 76-79 mm
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 76,00 mm
  • ✓ external diameter: 79,00 mm

€12.56* €34.00* (63.06% saved)
Item number: ZR-76X79-STB-Sale260623
Centric Ring Brake Disc Centering BMW X5 72,50-75,00 mm BMW 7 F01
  • ✓ centric ring for brake disc on several models BMW
  • ✓ internal diameter: 72,50 mm
  • ✓ external diameter: 75,00 mm
  • ✓ height/thickness: 7,00 mm

€23.99*
Item number: ZR-726x749-STB

Average rating of 5 out of 5 stars

500ml DOT 4 Bremsflüssigkeit Brembo Brake Fluid (1L = 23,98€) Bremsanlage umbau
  • ✓ Significantly higher boiling point
  • ✓ Better pedal feel
  • ✓ Suitable for the race track

€11.99*
Item number: 1210

Average rating of 5 out of 5 stars

Centric Ring Ford Focus 63,5x65,00mm Audi VW Brake Disc
  • ✓ centric ring for brake disc
  • ✓ internal diameter: 63,50 mm
  • ✓ external diameter: 65,00 mm

€33.99*
Item number: ZR-635x650-STB

Average rating of 5 out of 5 stars

Radnaben Lochkreis Umbohren Sonderanfertigung

€129.00*
Item number: RN-Umbohren

Average rating of 4.6 out of 5 stars

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ optimized paste for brake systems
  • ✓ correct viscosity
  • ✓ no squeaking

€2.85*
Item number: LUBE001

Average rating of 5 out of 5 stars

500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ Racing brake fluid
  • ✓ Reduction in brake fading
  • ✓ improved pedal feel

€37.30*
Item number: BF307

Average rating of 3.7 out of 5 stars

Centering Ring for Brake Disc Custom Made Audi VW Seat Opel Honda
  • ✓ centering ring, exclusive and individual custom-made
  • ✓ rings made of high-strength steel

€34.00*
Item number: ZRR1

Average rating of 5 out of 5 stars

Hub Centric Ring VW T3 Bus Van Utiliy to Phaeton Audi Discs
  • ✓ hub centric ring for Bremsscheibe
  • ✓ inner diameter: 64,65 mm
  • ✓ outer diameter: 68,00 mm
  • ✓ height: 9 mm

€25.84*
Item number: ZR-651X679-T3

Average rating of 5 out of 5 stars

Brake Disc Centric Ring Audi VW 57,1x66,9 mm Mercedes Brake Disc
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 57,10 mm
  • ✓ external diameter: 66,90 mm

€23.99*
Item number: ZR-571X669-STB

Average rating of 5 out of 5 stars

Hub Centric Ring Wheel Hub 56,5x70 Opel Astra Zafira Coupe
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 56,60 mm
  • ✓ external diameter: 70,00 mm

€21.99*
Item number: ZR-565X70-STB

Average rating of 5 out of 5 stars

Hub Centric Ring Wheel Hub Golf Corrado G60 VR6 16V Corrado Rear Axle Brake System R32 S3
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 57,00 mm
  • ✓ external diameter: 68,00 mm

€20.99*
Item number: ZR-57X68-STB

Average rating of 5 out of 5 stars

Screw Cardan Shaft Flange Drive Shaft for Audi Seat Porsche VW
  • ✓ drive shaft screws
  • ✓ Audi, Seat, Porsche, VW
  • ✓ OE number VW 893 407 237, AUDI N 911 082 01

€15.99*
Item number: 1092

Average rating of 5 out of 5 stars

PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ to configure yourself
  • ✓ with TÜV certificate
  • ✓ best quality

€96.00*
Item number: LK1

Average rating of 4.6 out of 5 stars

Universal Spacer Track Enlargement Slice 3mm 5x100 5x112 5x120 4x100
  • ✓ Bolt circle: 98 to 120
  • ✓ thickness 3.0mm
  • ✓ center centering up to a maximum of 77.9

€8.13*
Item number: 796
Wheel Lug Nuts with Cone Collar M16x1.5 SW (Width across Flats) 27x11 height 21mm
  • ✓ M16x1.5
  • ✓ tapered collar 60°
  • ✓ total height 21 mm

€3.85*
Item number: RM-M16X15-SW27X11

Average rating of 5 out of 5 stars

Brake caliper adapter custom configurator
  • ✓ brake caliper adapter custom-made manufacturing 
  • ✓ for front und rear axle
  • ✓ information about the vehicle

€111.00*
Item number: BR1

Average rating of 4.9 out of 5 stars

Brake discs Bore circle Reboring Hub bore machining Special production
  • ✓ Brake disc bolt circle drilling special design
  • ✓ Drill an additional 2nd bolt circle in the brake disc
  • ✓ Turn up hub diameter

€59.00*
Item number: BS-UMBOHREN

Average rating of 5 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1

Average rating of 4.8 out of 5 stars

Hub Centric Ring Brake Disc VW Golf MK5 GTI 6 65.10 to 66.80 mm Audi A3 S3 Scirocco
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 65,10 mm
  • ✓ external diameter: 66,8 mm

€16.98*
Item number: ZR-651X668-STB

Average rating of 5 out of 5 stars

Hub Centric Ring Brake Disc VW Golf MK4 R32 Audi A3 S3 TT Cupra R 65.10 to 67.90 mm
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 65,10 mm
  • ✓ external diameter: 68,00 mm

€19.99*
Item number: ZR-651X679-STB

Average rating of 5 out of 5 stars

Hub Centric Ring Brake Disc E46 E30 E36 BMW 328i 325i 62.00 to 75.00 mm
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 62,00 mm
  • ✓ external diameter: 75,00 mm

€28.99*
Item number: ZR-62X75-STB

Average rating of 5 out of 5 stars

Centric Ring from 60.00 to 67.00 mm Mercedes Brake Disc Toyota Supra
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 60,00 mm
  • ✓ external diameter: 67,00 mm

€22.99*
Item number: ZR-669X600-STB

Average rating of 5 out of 5 stars

Hub Centric Ring Golf Corrado G60 VR6 16V Corrado Rear Axle Brake System R32 S3
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 57,10 mm
  • ✓ external diameter: 65,00 mm

€24.99*
Item number: 343-RI-1X

Average rating of 4.8 out of 5 stars

Hub Centric Ring VW Bus T3 from 60.00 to 68.00 mm Audi Brake Disc
  • ✓ hub centric ring for brake disc
  • ✓ internal diameter: 60,00 mm
  • ✓ external diameter: 68,00 mm

€16.06*
Item number: ZR-679X601-STB

Perfect braking performance with Epytec brake hose holders: Indispensable for tuning enthusiasts

If you are looking for the perfect braking performance for your vehicles, you have come to the right place. With our Epytec brake hose holders, we offer you the ideal and universal solution to optimize your brake lines and ensure that you always maintain full control. 

No matter whether you are a car lover, tuning enthusiast or racing fan - our high-quality brake hose holders are indispensable for your tuning projects. Discover how you can get the most out of your vehicle with our components while ensuring maximum safety.

Summary: 7 facts about our brake hose holders

  1. Epytec brake hose holders offer tuning enthusiasts a ideal solution for optimizing brake lines for front and rear axle.
  2. The brake line holders are made of high-quality material and are precisely processedto ensure a secure and stable attachment of the brake lines.
  3. Easy installation or conversion and Clear instructions make installation uncomplicated and time-saving.
  4. The robust construction of the brake line holder ensures optimal performance and safety, even under extreme conditions.
  5. Thanks to their precise workmanship, the brake hose holders offer a perfect fit and reliable function for your brake lines.
  6. The versatility of the brake hose holders enables them Adaptation to different vehicle models and body variants.
  7. The flexibility of the brake hose holders allows both welding and screwingto meet different requirements.

The importance of brake hose holders for your brake line

If you want to optimize the performance of your vehicle, there is one crucial factor that you should not overlook: the brake line holders. These inconspicuous but extremely important universal components play a crucial role in your car's brake lines. Why? Because they ensure that your brake lines are firmly and securely attached to the body using a mounting bracket, thus enabling smooth transmission of the brake pressure.

For tuning enthusiasts, choosing the right brake hose holders on the front and rear axles is crucial. After all, it's not just about improving the exterior of your vehicle, but also about the safety and performance requirements on the road or racetrack. 

The advantages of Epytec brake hose holders

Considering how important brake hose holders are for braking performance and why tuning enthusiasts choose Epytec, it's worth taking a closer look at the advantages of this component. 

The advantages of Epytec brake hose holders are characterized not only by their functionality, but also by their quality and adaptability. This means they also meet the highest demands.

Epytec brake hose holder: design and functions

A brake hose holder from Epytec is a high-quality and robust component made of steel. The holder consists of a precisely shaped, stable holding plate that has 1 or 2 holes to enable flexible assembly of the brake lines. These holes allow the holder to be attached to different positions on the body, making it ideal for universal conversion applications. 

Ultimately, a brake line holder is a stable retaining clip that securely fixes the brake lines and minimizes vibrations. A rubber insert ensures that the brake lines and bore are protected from abrasion and damage, extending the life of all components.


The mounting bracket allows for stable attachment in the area of the rear axle or other suitable locations on the vehicle. Whether for conversion or as a spare part - the Epytec brake hose holder is a component that impresses with its universal applicability and first-class workmanship.

High-quality material and precise workmanship

A key advantage of our brake line holders is the high-quality material and precise workmanship. We only use robust steel, which not only offers high strength but is also long-lasting. 

Thanks to this choice of material, our brake hose holders and mounting brackets can also prove their worth under extreme conditions, be it at high speeds on the racetrack or in demanding off-road applications. 

The precise workmanship of our brake line holders also ensures a perfect fit and reliable function. So you can rest assured that your brake lines are securely and stably attached, resulting in consistent and effective braking performance.

Universal adjustment options for different vehicle models and brake lines

Another big advantage of our brake hose holders is their universal adaptability to different vehicle models. We understand that every tuning enthusiast has different needs and preferences when it comes to optimizing their vehicle. 

That's why we offer various universal brake hose holders for different body variants and vehicle types. Whether small car, sports car or off-road vehicle, whether front or rear axle, everyone will find what they are looking for with us. Our brake hose holders can be easily adapted to your vehicle and offer a perfect solution for every tuning requirement.

Installation and conversion instructions for the brake hose holder

Our universal brake line holders are designed to securely and securely hold your brake lines, regardless of the conditions in which you ride.

Installing and using our brake hose holders is straightforward. Make sure you have all the components, tools and materials you need for the conversion to hand and then follow our instructions. 

To subsequently install the brake line, you can remove the rubber ring from the holder, cut open the bottom of the rubber ring and insert the brake line. Then attach the rubber ring including the brake line back into the brake line holder.

Our brake hose holders can be welded or screwed to all car bodies as they are universally suitable. With Epytec brake hose holders you get a reliable and high-quality solution for your brake system. Our products offer optimal performance and easy installation, saving you time and effort. 

Rely on our experience and expertise in tuning and equip your vehicle with the best brake line holders on the market. Moreover We offer a large selection of other universal retaining plates, mounting brackets and components as well as our individual tuning adapters. We are happy to provide you with further information.

Special requirements in tuning and racing

Now that we have examined the installation and importance of Epytec brake hose holders, it is important to consider the special requirements for a brake line in tuning and racing. In these demanding areas, high-quality and high-performance components are essential to get the best possible performance from your vehicle.

Optimizing braking performance for high performance vehicles

For tuning enthusiasts who want to bring their vehicles to a high-performance level, optimizing braking performance is a crucial factor. An effective braking system is of utmost importance, especially when accelerating quickly and at high speeds. 

Thanks to the stable and precise manufacturing of these components, they offer a reliable fastening of the brake lines, which enables improved braking performance and greater safety on the road.

Brake hose holder for special body variants and conversion projects

Another important aspect in tuning and racing are special body variants and conversion projects. Vehicles are often rebuilt and modified to achieve optimal performance. 

Conventional brake hose holders such as normal mounting brackets or retaining clips for brake hoses can quickly reach their limits. With the brake hose holders from Epytec you are on the safe side with your brake lines. 

Thanks to the precise holes, these mounting brackets can be easily attached to various body variants on the front or rear axle. They offer stable fastening, no matter how unusual the conversion plans and requirements are.

The importance of stable brake line holders at high speeds

The stability of the brake hose holder plays a crucial role, especially at high speeds. Due to the aerodynamic loads and vibrations, inferior brackets, such as simple retaining clips, can quickly fail, which can lead to dangerous situations. 

Our universal brake hose holders are designed to withstand extreme loads and ensure that the brake lines are securely fastened. This means you can rely on your braking system even at top speeds and make the most of your tuning project.

Spare parts and accessories for your tuning project

In the Epytec online shop you will find all the components you need to optimize your vehicle, from the brake hose holder towards additional accessories and spare parts that increase your performance and complete your tuning project.

Selection of compatible components and accessories in the Epytec online shop

Our online shop offers a wide range of compatible components and accessories for tuning enthusiasts. From special brake hose holders for different vehicle models up to Adapters and holders for other components – you will find what you are looking for with us. 

Thanks to our clear categories and detailed product descriptions, you can quickly and easily select and order the right components for your tuning project.

Fast delivery and professional advice from Epytec

We know that you need your parts quickly to advance your tuning project. That's why we offer fast delivery directly to your home. As well Our experts are available at any time to advise you if you have any questions about our products or conversions and to support you in choosing the right components. 

With Epytec you can be sure that you not only get high-quality components and spare parts, but also first-class service that will make your brake line tuning project a success.

Special adapters for individual tuning of the brakes

Did you know that Epytec doesn't just produce brake hose holders, brake hoses and brake lines? Our range also includes tailor-made tuning adapters, which allow you to mount high-quality and non-standard brake components on your vehicle. 

Whether to optimize braking performance or to install special braking systems on the front or rear axle – Our adapters offer the flexibility and precision you need for your individual tuning needed.

Epytec's tuning adapters are specifically designed to precisely adapt different brake lines to your vehicle configuration. This opens up completely new opportunities for you to install powerful braking systems that would normally not be compatible. 

By using our adapters, you can ensure that your brakes work perfectly and are optimally tailored to your driving needs.

Every detail of our tuning adapters is perfectly coordinated to achieve the best possible performance. At Epytec we attach great importance to producing adapters that are not only robust but also easy to install. 

Discover now the possibilities that our individual tuning adapters offer for your brakes and take your vehicle to the next level. With Epytec you can be sure that you will always find the best solutions for your tuning projects.

FAQ

What special advantages do Epytec's brake hose holders offer compared to other components on the market?

Our brake hose holders feature high-quality material and precise workmanship, ensuring optimal performance and reliability. They are universally suitable and can be used on different vehicle models. Thanks to the robust retaining plates and holes, they enable flexible installation and a secure hold.

Are Epytec brake hose holders easy to install?

Yes, the installation is straightforward and requires no special knowledge. With our instructions and the appropriate tools, you can easily assemble the holders yourself and quickly advance your tuning project. Additional brackets and mounting brackets can be purchased separately to further facilitate installation.

What special adjustment options do Epytec’s brake hose holders offer?

Our holders are suitable for different body variants and vehicle types and can be universally adapted. This makes them the ideal solution for special conversions and tuning applications, especially when attaching to the rear axle.

How quickly are Epytec products delivered?

We attach great importance to fast delivery so that you can continue your tuning project without delays. As a rule, shipping takes place through our online shop within a few working days of receipt of your order, so that you have your spare parts in your hands as quickly as possible.

Do Epytec tuning adapters also offer improved braking performance for high-performance vehicles?

Yes, our tuning adapters enable optimized braking performance, especially in high-performance vehicles. Thanks to their stable construction and precise fit, they ensure reliable attachment of the brake lines, resulting in improved performance on the road or racetrack.

  • Lochkreisadapter bestellt. passen einfach mega gut. top Qualität

    Stephan Eznats aus Facebook

  • Habe Lochkreisadapter gekauft: Super Beratung, Top Qualität, alles bestens!

    Timo Schwierzeck von Google

  • Schnelle Lieferung, wie immer alles sehr passgenau und gut durchdacht. mehr gibt`s hier nicht zu sagen. Absolut Empfehlenswert, egal bei welchem Umbau.

    Roy Müller von Google

  • Echt super Passgenauigkeit und schnelle Lieferung zu Fairen Preisen!!

    Philipp Steiner aus Facebook

  • Beste Adresse für spezial Adapter. Habe Lochkreisadapter von 4x100 auf 5x120 bestellt. Diese waren nach 3 Werktagen da und passten perfekt. Wenns speziell und top Qualität sein soll dann epytec. Werde immerwieder gerne bei diesem kompetenten und schnellem Team bestellen.

    Günter Sölch von Google

  • Ich bin super zufrieden mit den Teilen von epytec. Gut verpackt, tolle Qualität und das ganze macht den TÜV Prüfer auch noch glücklich. Man findet viele etwas spezielle teile. Wirklich toll.

    Jasmin W von Google