Porsche S2 944 964 C2/4 968CS M030 brake caliper adapter to 993 Big Red brake system 322x32
- ✓ 322x32 96535104600 965 351 045 00 Brake disc from 965
- ✓ 4-piston 92835142203 92835142103 Brake caliper
- ✓ front axle
€135.27*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Big brake on your Porsche 944 S2, 964 C2/4 and 968CS
With these brackets you can install the 993 Biturbo brake (322x32) as well as the original M030 brake on the 944 S2 and 968
We designed the bracket to be used for 2 different brake rotors with different overall heights in conjunction with the 4 piston 993 Biturbo calipers.
1. with the 322x32 mm disc brake discs from the 965 / 928GTS with 77 mm total height, or with 993 Biturbo brake disc 72 mm total height.
The holes are set off-center and depending on which brake disc would like to be installed, the holder can simply be turned around so that the disc runs centrally to the 993 caliper.
2. or simply the original M030 brake (304 mm) with the M030 caliper and the M030 brake disc can be installed on the 944 S2 and 968 steering knuckle.
Still needed components for corresponding conversion:
- 322 mm -brake discs 965 right 965 351 046 00
- 322 mm -brake discs 965 left 965 351 045 00
- Brake caliper right 928 351 422 03
- M030 brake caliper left 928 351 421 03
Advantages:
- extreme deceleration values also in combination with our rear axle brake system
- due to the material certificate included in the scope of delivery, a registration by individual acceptance can also be made possible for series production vehicles
- directly suitable for the above mentioned models and therefore easily rebuildable to original condition at any time
- our EPYTEC brake caliper adapters require no sending in of your series parts, no re-welding - re-milling or re-drilling.
Scope of delivery:
- 2x brake caliper adapter for Porsche 944 S2, 964 C2/4 and 968CS without m030
- material certificate
- high strength bolt set
- Stress analysis for registration
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
29 October 2023 11:24
Jörg R
Adapter sieht wertig aus, top Materialanmutung. Der Service passt.
3 July 2019 21:10
Christian K
Sehr gutes Produkt, passt perfekt zu meinen Komponenten. Dienstleistung und Hilfe am Telefon waren ausgezeichnet. Sehr empfehlenswert.
5 January 2020 21:59
Christian H
Hallo da wir über Weihnachten geschlossen hatten und morgen erst meinen ersten Arbeitstag haben konnte ich euer Paket noch gar nicht auspacken und weiß noch gar nicht was gekommen ist und deshalb kann ich auch keinen Schlauch bewerten aber ich gehe davon aus dass der super ist danke und einen schönen Sonntag
17 February 2021 15:14
theobald6666
Super schnell und gut gemacht! Gerne wieder. Dankeschön ð
9 February 2021 14:05
Bernhard W
Alles Top (Verpackung, Versand, Material). Es musste nur ein Teil der Aufnahme weg gefeilt werden, da der Adapter ca. 1,5 mm Unterstand zur Bremsaufnahme hat.
2 November 2019 21:48
Christian B
Prima Passgenauigkeit. 1 Punkt Abzug gibt es nur dafür dass die Schrauben ein paar mm länger sein könnten und das das Produkt Silber blank ist statt schwarz. Die Adapter an den sattel können ebenfalls mit versenkten kürzeren Inbus Schrauben versehen sein statt Sechskant. Word die Sache noch stabiler machen Ansonsten prima verarbeitet.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality