Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Find out now how you can easily get your TÜV registration

Customer account

Via our customer account (click here), you have complete access to all certificates, expert reports, and installation instructions for your purchased Epytec tuning product after purchase.

Customer account

TÜV certificate / material certificate

Our brake caliper tuning adapters, track plates and bolt circle adapters have been tested by TÜV - SÜD in a fatigue strength test. We have received the corresponding certificates. You can present these to the expert at TÜV or Dekra. This allows individual approval in accordance with § 19.2 StVZO.

Technical report brake caliper adapter

Technical report bolt circle adapter

Parts certificate for steel flex lines

Here, in the pictures, you can see how the TÜV-Süd has tested our adapters for breakage resistance and other safety-relevant aspects.

For all our other Epytec products, you can print out a sample of a material certificate to check with your TÜV inspector in advance. All our products (unless otherwise labelled) are subject to registration! Approval can be carried out by an expert at TÜV or Dekra in accordance with §19.2 StVZO. 
For a better allocation and easier work for the acceptance according to §19.2 StVZO, we supply a material certificate with an Epytec logo. We recommend that the expert includes the manufacturer's imprint in the car documents. 

Stress analysis / FEM calculation - TÜV

It may happen that a material certificate is not sufficient for the expert. In this case, please speak to the inspector to see if he will register the adapter with a stress analysis / FEM calculation.
You can simply send our sample stress analysis to your TÜV inspector. If he gives his approval, we can make this complex calculation, which we cannot do ourselves in-house, for a flat rate of €70 -> only applies to series adapters, not to customised products!
 For customised products, we charge a pro rata fee of 159€

Sample stress analysis

TÜV-Certification

We are officially certified by TÜV SÜD Management Service GmbH, which is designated by the Federal Motor Transport Authority (KBA), in the sector production of wheel spacer adapters, brake caliper adapters, engine and gearbox mounts, and adapters for chassis/drive components for motor vehicles been. To make it easier to register your Epytec tuning adapters, you can present our certificate to the expert at TÜV or Dekra.

TÜV-Certification

Partner network - TÜV inspectors and car workshops in your area

Til today we have only good experiences with approval from TÜV or Dekra. Many of the experts have installed our products on their cars themselves. Many tuning companies swear by our quality because registration is problem-free. However, we expressly point out that it is always a matter of the expert's discretion and acceptance cannot be guaranteed. A change of expert may be able to help here. Here on our store locator you will explicitly see the registration departments and workshops that work with us.

Find a registration partner nearby!

Registraion partners nearby