VW Golf MK3 VR6 Corrado Passat 35i Adapter Porsche Brake Caliper Adapter
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake discs
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ front axle
€129.65*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for original Seat Leon Cupra R 323th brake discs, combined with 4 piston Porsche Brembo calipers.
Suitable for all models with VR6 plus axles:
- Golf 3 VR6
- Corrado VR6
- Passat 35i VR6
Required components:
- brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422(written on the calipers, back number distinguishes right and left caliper) (only 100% suitable with the specified Porsche caliper )Brembo reference : left 20.7673.03 + right 20.7673.04
- original brake pads from the 955.352.421 + 955.352.422 brake caliper are used
- brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs better engine performance
- suitable for 17 inch rims
- components come from the production series of VW
- registration is possible if correct assembly
- including set of mounting screws
Delivery:
- 2x brake caliper adapters, galvanized (see picture)
- set of high-strength mounting screws
- material certificate
- stress analysis
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
12 December 2019 08:24
Herr V
Ajuste perfecto!
24 March 2023 20:14
Andreas K
Alles bestens!
1 December 2023 10:51
Goran I
zadovoljni smo brzom isporukom,kvalitetom dijelova i svime potrebnim za ugradnju
26 June 2020 10:54
Elie M
Objet de qualité, correspond parfaitement au véhicule. Aucun doute quant à la qualité du produit. Parfaitement installé sur le véhicule, sans aucun problème
27 August 2023 08:17
René B
Sehr het Passgenauigkeit. Habe ich aber auch nicht anders erwartet, da ich schon öfter bei euch bestellt habe. Qualität und Preis passen meiner Meinung nach auch.
31 January 2019 06:49
Stefan R
alles ok danke
23 August 2020 18:11
Christoph G
Super Adapter, Passgenauigkeit 1a und die Verarbeitung ist auch top. Wenn es um das Thema Adapter geht kann ich euch nur weiter empfehlen.
19 January 2019 17:24
Stefan R
alles ok danke
12 December 2019 13:34
Herr V
Acabado y ajuste perfecto!
27 November 2018 05:05
Philipp G
Passt perfekt
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: