Brake caliper adapter BMW 1 series 2 series 3 series 4 series F20 F21 F22 F23 F30 F31 F32 F33 F34 F36 convertible coupe BMW M2 M3 380x30 brake disc 4 piston brake caliper tuning adapter
- ✓ 380x30 34112284809 34112284810 Brake disc
- ✓ 4-piston F20 34116799465 34116799466 Brake calipers
- ✓ front axle
€173.69*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on models series 1, 2 BMW F20, F21, F22 and F23, as well as the 3 and 4 series F30, F31, F32, F33, F34, F36 for conversion to the BMW F20 M 4-piston brake calipers, combined with the 380x30mm BMW M2 M3 M4 brake discs to drive.
The BMW F20 M 4-piston brake calipers are simply screwed to the original axle mounting support instead of the original caliper using our tuning adapter.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: BMW F20 M 4-piston, reference left 34116799465 / right 34116799466
- brake disc: BMW M2 M3 M4, front axle, 380x30mm, reference left 34112284809 / right 34112284810
- Brake pad: reference 34112284969
Delivery:
- 2x brake caliper adapters for series 1, 2 BMW F20, F21, F22 and F23
- high-strength mounting screw material
- material certificate
- Stress analysis / FEM calculation for registration
- car registration certificate
- installation instructions
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
6 February 2023 20:36
Cédric D
Very good parts !! No problem ! Fit very Nice !! Thanks Epytec ;-)
20 April 2024 18:22
Georgios S
Sehr viel wert auf Detail, dies merkt man direkt beim öffnen des Paketes. Der umbau der grauen unlackierten Bremsanlage ging sehr einfach von der Hand, kein kürzen irgendwelcher Schrauben war vonnöten. Intuitiv kann man diesen umbau in zwei Stunden erledigen, einzig beim erneuten anbringen des Bremsverschleissanzeigers, wird man durch das versetzten des Bremssattels nicht mehr die original Fassung für das Kabel nutzen können. Hier half mir ein Kabelbinder. Durch das versetzen konnte ich die M3 f80 380 mm Bremsscheibe fahren, was nicht nur gut aussieht sondern dementsprechend gut besser bremst.
18 October 2023 08:33
Jonathan F
Excellent produit, ce monte très facilement sans rien modifié. Top
9 October 2023 10:59
alanandnickym140i
Thank you.
29 September 2022 06:07
alleskleber0_4
schnelle Lieferung !! alles bestens gelaufen !! gerne wieder !!
28 February 2023 09:52
lukholroy_0
Brilliant from start to finish
3 June 2023 19:41
Benjamin B
product loyal to the pictures , fast delivery
22 March 2023 19:21
Christian K
Die Adapter sind qualitativ jedoch muss man am Bremssattel etwas feilen damit man 18 Zoll Felgen fahren kann. Schrauben sind zu lang man muss sie teilweise kürzen. Der Lochabstand von 20.0mm müsste eigentlich auf 19.0mm Verändert werden dann muss man auch nicht so viel vom sattel feilen damit 2mm Lufft zur Felge sind. Ergebniss ist aber top sieht viel besser aus mit der großen Bremsscheibe und bremst auch besser.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 380x30
- ✓ 79mm centering
- ✓ 62mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track