Welding plates
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
- ✓ repair plate kit for rear axle on model 3th BMW E36
1 complete set of stiffening plates for the reinforcement of the entire Opel Kadett C car body.
- ✓ front axle reinforcement plates for all Opel Kadett C models like the original 1000 series
- ✓ repair / reinforcing plate kit for the control / trailing arm (rear axle), on model 3th BMW E36
- ✓ wishbone support / suspension control arm bar / strut
- ✓ VW Golf MK1 Cabrio Jetta VR6 16V G60
- ✓ Repair sheet plate for shock absorbers, spring or axle suspension rear for Audi RS4 S4 RS2 S2 A4
- ✓ Body reinforcing kit (14-pieces) for Opel Corsa A
Additional stiffening plates for front axle spring holder on Opel Kadett C.
- ✓ VW Golf MK1 Caddy Jetta wishbone reinforcing plate GTI VR6 G60 Cabrio
- ✓ wishbone reinforcing plate for all Opel Corsa A B and Tigra models
- ✓ 1 set of mounting brackets / welding supports for a front strut bar on model Kadett C (right and left)
- ✓ 2x reinforcement plates for the suspension strut mount on the wheel house of the VW Golf MK1 and Scirocco body
- ✓ repair / reinforcing plate kit for the differential mounting (rear axle), on all models BMW E30 and E36, Compact models
- ✓ Repair / reinforcing plates / welding plates for BMW E30, rocker panel, wheel arch / house, chassis
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ reinforcing / repair plates for chassis and axle support / beam on all models BMW E46
- ✓ reinforcing plate for suspension turrets / strut mounts on all models BMW E30, except 4WD
- ✓ kit of reinforcement plates for BMW E30 front axle
- ✓ reinforcement plates for the front suspension strut brace / tower on the Opel Kadett C body
- ✓ reinforcement plates for the front wishbones on all Opel Kadett C, Ascona B, Manta models
- ✓ reinforcing plate kit for the rear wishbones ( left+right ) on all models BMW E30 and E36 Compact
- ✓ 2x locking / closing plate (V-bar) to reinforce the suspension in the wheel housing (left and right) of the VW Golf MK1, Scirocco 1 etc.
- ✓ reinforcing plate / underride bar, front axle, for all Opel Kadett C models, like the original in the 1000th series
Stiffening plates for front suspension on Opel Kadett C car body.
- ✓ reinforcement plates for the front bottom axle bracket / support on the Opel Ascona A
Stiffening plates for bulkhead on Opel Kadett C car body.
- ✓ reinforcement plate for front wheel suspension on Opel Kadett C, car body.
- ✓ reinforcement plates for the front wishbone on models Opel Ascona A
Stiffening plates for rear mudguards on Opel Kadett C car body.
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x35
Thread 1.25
Blank
Quality 12.9
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 76,00 mm
- ✓ external diameter: 79,00 mm
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x20
Thread: 1.5
Blank
Quality: 10.9
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M10x30
- ✓ alloy blank
- ✓ quality 10.9
Reinforcement plates
There are always weak points on the chassis that can occur simply due to age, rust or "wear and tear".
The subject of rust on the chassis also leads time and again to the fact that you do not get TÜV approval.
Also if a car is used for racing, weak points can also occur when it is subjected to enormous loads, as series-production cars are not designed for such continuous stress.
With our chassis reinforcement plates, you can counteract these problems easily and cheaply.
We offer reinforcement plates and weld-in plates for a wide range of cars and segments.
This is certainly one of the most cost-effective solutions to get your car back on track for the TÜV or to reinforce the chassis so that it can withstand the conditions in racing.
If you are still missing information or if something is unclear to you, just contact us and we will help you.Click here for info & contact
-
Also ich habe während meines Projekts Golf1 Umbau auf 16V mehrfach bei der Fa. Epytec bestellt und habe immer meine bestellte Ware so wie beschrieben bekommen und auch der Versand war wirklich schnell !! Einfach top !! Freundliche Grüße
Dennis Weyer von Google
-
Super Zufrieden hatte einige Motorhalter bestellt die auch gut gepasst haben damit kann ich super in mein Golf 2 1.9TDI Pumpe Düse Projekt starten
Tobias Geschke von Google
-
Beeindruckende Kompetenz, wodurch Umbaumaßnahmen an Motor, Bremse, Kupplung und Fahrwerk extrem vereinfacht werden. Mein 1er hat z.B. den Umbausatz auf hydraulische Kupplung, die vestärkten Querlenker und alle Motorhalter von Epytec. Und besonders der neue Getriebehalter mit dem Axiallager begeistert. Macht weiter so.
Andreas Kuntz von Goole
-
Echt super Passgenauigkeit und schnelle Lieferung zu Fairen Preisen!!
Philipp Steiner aus Facebook
-
Schnelle Lieferung, wie immer alles sehr passgenau und gut durchdacht. mehr gibt`s hier nicht zu sagen. Absolut Empfehlenswert, egal bei welchem Umbau.
Roy Müller von Google
-
Schnelle Lieferung und top Ware, super Support vor und nach dem Kauf. Reaktionsschnell auf emails und sogar mit Rückruf. Da kann sich so mancher eine Scheibe abschneiden 😉👍🏻
TheDoberdog von Google
