Brake Caliper Adapter Porsche for Audi TT A3 S3 VW Golf Polo

€160.71*

Prices incl. VAT plus shipping costs

Available

Product number: 143

Delivery by Saturday, 05.04.2025 if you order within the next 7 Hours.

Product number: 143

Weight: 3.258 kg

Brake caliper hole spacing: 146

Hole spacing steering knuckle: 94

Mounting location: front

Your benefits

Einfache TÜV Eintragung
Qualität Made in Germany
Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
Weltweit Nr 1 in Sachen Tuning Adapter
15 Jahre Expertenwissen
10 Jahre Garantie

Brake caliper adapter, front axle, for Audi TT A3, etc, to convert to Porsche or Brembo 6-piston ZR18 brake caliper, combined with the R32 334 x 32mm brake discs.

These calipers are used as standard for Porsche Cayenne, VW Touareg and Q7.

Suitable for the following models of VW/Audi group:

Audi A1 (8X)
Audi A3 (8L)
Audi TT (8N)
VW Golf MK4
VW Bora
VW Beetle
VW Polo (9N)
Seat Ibiza
Seat Leon

Important!:

The adapter is only suitable for cast wishbones OE: 8N0 407 151 A.

These are installed as standard in the Golf 4 R32, Audi S3 8L, and Audi TT 8N 1.8T and the Quattro models. All other models of the Golf 4, Audi A3 series must be converted to this cast wishbone, otherwise no more steering is possible. The stabilizer OE: 1J0411305AF must also be converted in vehicles that do not have the cast wishbone installed as standard.

We have the right wishbones in the matching accessories and can be ordered directly.

The problem with the wishbone only affects conversions to Z18 and Z17 calipers. With all other adapters that we still have, such as conversion to 4-piston Porsche Boxter, Audi TTRS or 6-piston Porsche Panamera brake calipers for the Golf 4 Audi A3 series, the adapters fit with all wishbones.

Required components:

brake caliper Porsche Cayenne ZR18 ZL18 , référence 95535142153 + 95535142253
brake disc VW Golf 4 R32 334x32mm part number: 8N0 615 301 B / 1J0 615 301 AA

Delivery:

2x brake caliper adapters (see pictures)
copy of vehicle document to simplify the registration
high-strength mounting screws
Template to check whether the brake system fits under your rim
material certificate

You also find the corresponding adapter for conversion to ZR17 6-piston brake calipers in our shop (click here)

Tipps, Infos und Hinweise:

Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Technical data:

Brake caliper hole spacing: 146

Hole spacing steering knuckle: 94

Mounting location: front

Brake caliper hole spacing: 146

Hole spacing steering knuckle: 94

Mounting location: front

Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form