Complete Kit Rear Golf MK3 Porsche + S3 4-hole Brake Caliper Adapter Hub Adapter Rear Axle 5x100 + S3 R32
- ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
- ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
- ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
- ✓ brake disc: Golf G60 5-hole 280mm VR6
€392.98*
Average rating of 4.7 out of 5 stars
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Brake caliper adapters with special hub / hub adapter for vehicles with 4x100 PCD in order to install rear brake caliper of Porsche 996 and Audi S3 8L / VW Golf MK4 R32, combined with the front 280mm G60 GTI 16V brake discs on the rear axle.
In this case, the S3 R32 calipers have only a function of hand brake. These are necessary because the Porsche calipers do not have the function of hand brake.
Suitable for the following VW und Seat models:
- Golf MK1 (only with our axle pivot - see item 313 in our shop.)
- Golf MK2 MK3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- better performance
- supplied material certificate
Technics:
The Porsche calipers are mounted between the axle beam and the axle stub. The necessary screws are supplied. The adapters for the S3 / R32 caliper are mounted onto the original Golf MK2 / MK3 bracket. With our supplied hub spacers, the 280 mm brake discs are centered and screwed. The track is wider by about 16 mm per side. The inside of the hub spacer is manufactured like the originals and therefore the wheel bearing remains the same.
Not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
For the rear axle, we offer brake adapters for conversion to the Porsche brake system, combined with the R32 brake discs. Visit our shop.
For vehicles equipped with ABS, the ABS disc of all Golf MK3 models can be kept and adjusted exactly on our hub spacers.
Required components:
- brake caliper: Porsche , reference: 996.352.421 + 996.352.422
- rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
- brake disc: Golf G60 5-hole 280mm VR6
- brake disc PCD habe to be modified to 4x100 (service available from EPYTEC)
Delivery:
- 2x special hubs / hub adapters with 4x100 PCD
- 2x brake caliper adapters Porsche
- 2x brake caliper adapters Audi S3 8L /VW Golf MK4 R32
- 2x centric rings
- high strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
10 of 11 reviews
Average rating of 4.7 out of 5 stars
4.73 out of 5 stars
Login
26 July 2019 09:56
Review with rating of 5 out of 5 stars
David C
all very well and very fast Thank you
10 December 2020 19:39
Review with rating of 5 out of 5 stars
Julian S
Klasse Adaptersatz
4 November 2020 20:31
Review with rating of 5 out of 5 stars
NICOLAS B
👍👍👍
25 March 2022 22:46
Review with rating of 5 out of 5 stars
Romain D
I just mooving my home and havent install yet but I already have front z17 with 334x32 brake disc and epytec adapter and it works great so Im sure those kit will work fine
26 July 2019 09:56
Review with rating of 5 out of 5 stars
David C
all very well and very fast Thank you
19 March 2020 12:02
Review with rating of 5 out of 5 stars
Fernando S
Je ne l'ai pas encore appliqué, mais je suis très satisfait du matériel. Lors de l'assemblage, j'envoie des photos.
21 March 2023 20:17
Review with rating of 5 out of 5 stars
Raul A
.
23 July 2019 09:40
Review with rating of 5 out of 5 stars
Olcay Y
Super Ware sehr gute Passgenauigkeut
4 November 2020 20:25
Review with rating of 5 out of 5 stars
NICOLAS B
Schnelle Lieferung und sehr gute Qualität. Vielen Dank
20 August 2018 07:31
Review with rating of 4 out of 5 stars
Jonas F
- gefallen hat mir die Verarbeitung der Teile. - ich würde es meinen Freunden und jedem der mit mir über einen Umbau spricht empfehlen - es wäre super wenn eine Ableitung für den Artikel verfügbar wäre wo auch mögliche Probleme erklärt sind( z.b bei Porsche werden 20mm starke Scheiben verbaut und bei diesem Umbau 22mm starke Scheiben, wenn man jetzt neue Bremsbeläge verbaut dann liegt der Äußere sehr stark an der Scheibe an so das diese nicht frei laufen kann also musste ich ca.2-3mm abschleifen das alles passt. - ich habe euch gewählt weil es kaum andere Hersteller dafür gibt. - ja ich war sehr skeptisch weil man nicht weiß ob es mit den Felgen die drauf sind usw. alles passt. Es wäre schön wenn es vor dem Kauf ein probekit gibt (natürlich für eine Gebühr) das man sehen kann wie es am Ende aussieht und was man alles so ändern muss bevor man dann das set kauft. - das Ergebnis ist sehr gut bis jetzt ich habe sehr viele Sachen von Ihnen für mein Projekt verbaut und bin gespannt ob ich das alles durch eine einzellabnahme abgenommen bekomme.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
-
VW|Caddy 1|1.5|14
-
VW|Caddy 1|1.6 D|14
-
VW|Caddy 1|1.6|14
-
VW|Caddy 1|1.8|14
-
VW|Corrado|1.8 16V|53I
-
VW|Corrado|1.8 G60|53I
-
VW|Corrado|2.0i 16V|53I
-
VW|Corrado|2.0i|53I
-
VW|Corrado|2.9 VR6|53I
-
VW|Golf 1 Cabriolet|1.3|155
-
VW|Golf 1 Cabriolet|1.5|155
-
VW|Golf 1 Cabriolet|1.6|155
-
VW|Golf 1 Cabriolet|1.8|155
-
VW|Golf 1|1.1|17
-
VW|Golf 1|1.3|17
-
VW|Golf 1|1.5 D|17
-
VW|Golf 1|1.5|17
-
VW|Golf 1|1.6 D|17
-
VW|Golf 1|1.6 GTI|17
-
VW|Golf 1|1.6 TD|17
-
VW|Golf 1|1.6|17
-
VW|Golf 1|1.8 GTI|17
-
VW|Golf 1|1.8|17
-
VW|Golf 2|1.0|19E, 1G1
-
VW|Golf 2|1.3 Cat|19E, 1G1
-
VW|Golf 2|1.3|19E, 1G1
-
VW|Golf 2|1.6 D|19E, 1G1
-
VW|Golf 2|1.6 TD|19E, 1G1
-
VW|Golf 2|1.6|19E, 1G1
-
VW|Golf 2|1.8 GTI 16V|19E, 1G1
-
VW|Golf 2|1.8 GTI Cat|19E, 1G1
-
VW|Golf 2|1.8 GTI G60|19E, 1G1
-
VW|Golf 2|1.8 GTI|19E, 1G1
-
VW|Golf 2|1.8|19E, 1G1
-
VW|Golf 2|1.8i Cat|19E, 1G1
-
VW|Golf 2|2.0|19E, 1G1
-
VW|Golf 3 Cabriolet|1.6|1E7
-
VW|Golf 3 Cabriolet|1.8|1E7
-
VW|Golf 3 Cabriolet|1.9 TDI|1E7
-
VW|Golf 3 Cabriolet|2.0|1E7
-
VW|Golf 3|1.4|1H1
-
VW|Golf 3|1.6|1H1
-
VW|Golf 3|1.8|1H1
-
VW|Golf 3|1.9 D|1H1
-
VW|Golf 3|1.9 SDI|1H1
-
VW|Golf 3|1.9 TD,GTD|1H1
-
VW|Golf 3|1.9 TDI|1H1
-
VW|Golf 3|2.0 GL|1H1
-
VW|Golf 3|2.0 GTI 16V|1H1
-
VW|Golf 3|2.0|1H1
-
VW|Golf 3|2.8 VR6|1H1
-
VW|Golf 3|Citystromer|1H1
-
VW|Jetta 1|1.1|16
-
VW|Jetta 1|1.3|16
-
VW|Jetta 1|1.5 D|16
-
VW|Jetta 1|1.5|16
-
VW|Jetta 1|1.6 D|16
-
VW|Jetta 1|1.6 GLI|16
-
VW|Jetta 1|1.6 TD|16
-
VW|Jetta 1|1.6|16
-
VW|Jetta 1|1.8|16
-
VW|Jetta 2|1.3 Cat|165, 19E, 1G2
-
VW|Jetta 2|1.3|165, 19E, 1G2
-
VW|Jetta 2|1.6 D|165, 19E, 1G2
-
VW|Jetta 2|1.6 TD|165, 19E, 1G2
-
VW|Jetta 2|1.6|165, 19E, 1G2
-
VW|Jetta 2|1.8 16V|165, 19E, 1G2
-
VW|Jetta 2|1.8 Cat|165, 19E, 1G2
-
VW|Jetta 2|1.8|165, 19E, 1G2
-
VW|Passat|1.6 TD|35I, 3A2
-
VW|Passat|1.6|35I, 3A2
-
VW|Passat|1.8 16V|35I, 3A2
-
VW|Passat|1.8|35I, 3A2
-
VW|Passat|1.9 D|35I, 3A2
-
VW|Passat|1.9 TD|35I, 3A2
-
VW|Passat|1.9 TDI|35I, 3A2
-
VW|Passat|2.0 16V|35I, 3A2
-
VW|Passat|2.0|35I, 3A2
-
VW|Passat|2.8 VR6|35I, 3A2
-
VW|Scirocco|1.1|53
-
VW|Scirocco|1.3|53
-
VW|Scirocco|1.5|53
-
VW|Scirocco|1.6|53
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
Average rating of 5 out of 5 stars
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
Average rating of 4.5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
Average rating of 5 out of 5 stars
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
Average rating of 4.7 out of 5 stars
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
Average rating of 4.6 out of 5 stars
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
Average rating of 5 out of 5 stars
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
Average rating of 4.7 out of 5 stars
- ✓ Bore 14mm
- ✓ 45 degree curved
- ✓ for welding
Average rating of 5 out of 5 stars
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 20mm per side
- ✓ 57.1 ->57.1 centering
Average rating of 5 out of 5 stars
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 25mm per side
- ✓ 57.1 ->57.1 centering
Average rating of 5 out of 5 stars
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
Passendes Zubehör zusammen kaufen und sparen
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
Average rating of 5 out of 5 stars
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
Average rating of 4.5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
Average rating of 5 out of 5 stars
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
Average rating of 5 out of 5 stars
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
Average rating of 4.7 out of 5 stars
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
Average rating of 4.6 out of 5 stars
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
Average rating of 5 out of 5 stars
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
Average rating of 4.7 out of 5 stars
- ✓ Bore 14mm
- ✓ 45 degree curved
- ✓ for welding
Average rating of 5 out of 5 stars
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 20mm per side
- ✓ 57.1 ->57.1 centering
Average rating of 5 out of 5 stars
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 25mm per side
- ✓ 57.1 ->57.1 centering
Average rating of 5 out of 5 stars
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track