Audi RS4 B5 Brake Caliper Adapter Rear Axle Audi RS5 Brake Disc 330x22 VW T5 T6 Caliper Tuning Adapter
- ✓ 330x22 8T0615601A Audi RS5 brake disc
- ✓ 1-piston 7H0615423 VW T5 T6 brake caliper
- ✓ rear axle
€342.59*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on model Audi RS4, for conversion to the RS5 brake discs 330x22, combined with the rear VW T5 T6 transporter brake calipers.
The adapters are suitable to all Audi RS4 models
Vorteile dieser Bremsanlage:
- Only other discs are required, all other components are original, i.e. don't buy expensive components
- Discs can be obtained cheaply, also directly from us.
- High deceleration
- Thanks to the material certificate supplied with the order, it is possible to approve your purchase even for series vehicles
- Directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake disc: Audi RS5 330x22, reference 8T0.615.601.A
- brake caliper: T5 T6 transporter, reference7H0 615 423
- Brake caliper carrier from the Audi A4 part number: 8K0.615.425.A / 8K0.615.426.A
- brake pads: reference 4G0615415
Delivery:
- 2x brake caliper adapters for Audi RS4
- high-strength mounting screws
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu Prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren << - Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den Längeren weg auszugleichen
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 330x22
- ✓ 68mm centering
- ✓ 41mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T5 / VW T6 Bus
- ✓ excellent fit
- ✓ rear axle Audi RS4 / RS2 / A4
- ✓ high stability
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
