Audi 80 Cabrio Camber Adjustement Plates Rear Axle Camber Correction - Camber Direction: negative - sharpened: 3,0 Degree
- ✓ camber adjustement plates, rear axle, for Audi 80 Cabrio in order to adjust camber and track. Thanks to these plates you can change the camber of the rear wheels negatively 3.0 degrees
€276.26*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
You do not want to spend money on tires that are worn only on one side, but you want more grip and better performance? Or do you just want to get the opposite? High curve speed and cool optics.
Then we have the product for you! With this product, you can adjust the camber according to your needs.
Kit of camber correction / adjustment plates for rear axle. Makes possible a camber correction / ajustement.
Thanks to our plates, you can modify the rear camber. Ideal for lowering the rear axle and correcting the angle defect if the tires are worn only on one side
These plates give your vehicle 3.0 ° negative camber. This means that the tires in the wheel arch are inclined 3.0 ° inwards
We recommend it for racing or slalom circuits. Or simply on the road, to take turns at a higher speed.
Our plates are mounted between the pivot of the axle stub and the axle. Quick and easy assembly. The wheels are then moved 5mm outwards. The plates are manufactured with high precision.
Its are made of steel and completely galvanized.Maximum anticorrosive protection and good optics.
Suitable for the following models:
- 80 und 90 Cabrio, Modell 89, 8A, 8C B4 ~ YoC: 1986-94
Delivery:
- 2x camber adjustement plates, left and right, 3,0 degree negative, for Audi 80 Cabrio
- Do I need longer screws or can the old ones remain in place'
- Longer screws are not needed up to a burr of 1,5degrees only at 2degrees the plate becomes 5mm thick at the strongest point then 5mm longer screws should be used
- Does the ABS still work after installing the camber correction'
- After a fall of one degree, it is possible that the ABS sensor no longer runs parallel to the ABS ring. In this case the position of the ABS sensor on the vehicle must be slightly changed.
Technical data:
Login
17 August 2023 20:42
DWC- Metall L
Super Passgenauigkeit
7 April 2020 07:01
audicoupefreak
super ebay verkäufer
11 March 2020 14:38
s4racer512
Super ðð» alles gut geklappt. Dankeschön
28 January 2020 22:53
deep-society
Super Ware, schneller Versand !!!
14 March 2019 08:56
bullimax_1
Alles super
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.
- ✓ Audi A4 B5
- ✓ Better directional stability
- ✓ Easy installation