Do I need longer screws or can the old ones remain.

With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates over 2°, we recommend slightly sanding a washer and placing it under the screw head so that it continues to sit flush on the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be needed directly.

Does the ABS still function after installing the camber correction?

Yes, basically the ABS will continue to function after installing a camber correction. The important thing is: If you significantly change the camber, the geometry between the ABS sensor and the ABS ring (impulse ring) can shift in such a way that the sensor no longer operates optimally "at the correct angle" or parallel to the ring.Why can there be problems?The ABS sensor reads the ABS ring with a defined distance and alignment angle. With a significant camber change (often from about 1°, depending on the vehicle and axle design), it can happen that:the sensor no longer lines up correctly, orthe air gap between the sensor and the ring is no longer within the target range.Then the ABS can basically continue to work, but there can be, for example, ABS/ESP warning messages, sporadic interventions, or error memory entries.What needs to be done then?If something like this occurs, a small adjustment is usually sufficient:Slightly correct the position of the ABS sensor (e.g., slightly reposition/align it on the mount)Check seating and attachment (sensor must be flat and securely seated)Check the air gap (not rubbing, not too large)Then it is best to read/clear the error memory and take a short test drive.Practical TipAfter the conversion, it is recommended to have an axle alignment. If you are using camber values in the range > 1°, it is advisable to check the ABS sensor area directly so that no surprises arise later.

Can camber correction plates be installed on drum brakes?

Yes, this is possible provided that a stub axle is installed on the rear axle. In this case, our Epytec camber correction plates can also be easily mounted on drum brakes. The functionality and installation are largely the same as for vehicles with disc brakes.It is important that the mounting points of the stub axle match the execution of the camber correction plates.

Original VW Audi Golf 4 A3 8L Quattro 4Motion Suspension Control Arm Wishbone Rear Axke Bushing Track Adjustement

Name: Original VW Audi Golf 4 A3 8L Quattro 4Motion Suspension Control Arm Wishbone Rear Axke Bushing Track Adjustement
Brand: EPYTEC
SKU: 765
Price: 127.67 EUR
Availability: InStock
Rating: 5.0 (10 reviews)

✓ Rear axle
✓ Audi A3 8L, Audi S3 8L, TT 8N, Golf 4, Golf 4 R32, Bora, Beetle, Seat Leon
✓ camber adjustment

€127.67*

Prices incl. VAT plus shipping costs

52 Reviews

Available

Product number: 765

Delivery by Thursday, 12.11.2026 if you order within the next 13 Hours.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Adjustable suspension control arm / wishbone arm for the VW Golf MK4, Audi A3 series.

Thanks to our suspension arm, you can adjust the camber as you like. Between + and - 3,5°.

These wishbones are absolutely necessary if you have a low-profile vehicle. This prevents wear-out of the tires on one side and saves unnecessary costs.

Suitable for the following vehicles:

Audi A3 (8L)
Audi S3 (8L)
Audi TT (8N)
VW Golf MK4
Golf 4 R32
VW Bora
VW Beetle
Seat Leon

Our suspension arm simply replaces the original, rear axle, manufacturing number: 1J0505323
Therefore suitable for both below and above

The wishbone struts are delivered including a PU bushing.

Delivery:

2x suspension arm / control arm / wishbone arm for Golf MK 4, Audi S3, Audi TT, VW Bora, Seat Leon, etc.
PU bushings already pressed in.
material certificate
installation instructions

We provide a material certificate for this adapter, allowing the TÜV inspector to easily register the adapter.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Manufacturer: Epytec

Mounting location: rear!

camber correction: 3.5°

Weight: 1.49 kg

Motor	Motorcode
2.8 VR6 4motion	1J1\|204PS(150KW)
1.9 TDI 4motion	1J1\|90PS(66KW)
1.9 TDI 4motion	1J1\|101PS(74KW)
2.0 4motion	1J1\|115PS(85KW)
3.2 R32 4motion	1J1\|241PS(177KW)
1.9 TDI 4motion	1J1\|115PS(85KW)
1.9 TDI 4motion	1J1\|130PS(96KW)
2.3 V5 4motion	1J1\|170PS(125KW)
2.3 V5 4motion	1J1\|150PS(110KW)
1.9 TDI 4motion	1J1\|150PS(110KW)
1.8 4motion	1J1\|125PS(92KW)
2.8 V6 4motion	1J1\|204PS(150KW)

Motor	Motorcode
1.8 T quattro	8N3\|245PS(180KW)
3.2 VR6 quattro	8N3\|250PS(184KW)
1.8 T quattro	8N3\|180PS(132KW)
1.8 T quattro	8N3\|224PS(165KW)
1.8 T quattro	8N3\|190PS(140KW)

Motor	Motorcode
S3 quattro	8L1\|224PS(165KW)
S3 quattro	8L1\|210PS(154KW)
1.8 T quattro	8L1\|150PS(110KW)
1.8 T quattro	8L1\|180PS(132KW)
1.9 TDI quattro	8L1\|130PS(96KW)

Motor	Motorcode
1.9 TDi Syncro	1M1\|150PS(110KW)

Motor	Motorcode
1.8 T 4x4	1U2\|150PS(110KW)

Motor	Motorcode
2.8 VR6 4motion	1J1\|204PS(150KW)
1.9 TDI 4motion	1J1\|90PS(66KW)
1.9 TDI 4motion	1J1\|101PS(74KW)
2.0 4motion	1J1\|115PS(85KW)
3.2 R32 4motion	1J1\|241PS(177KW)
1.9 TDI 4motion	1J1\|115PS(85KW)
1.9 TDI 4motion	1J1\|130PS(96KW)
2.3 V5 4motion	1J1\|170PS(125KW)
2.3 V5 4motion	1J1\|150PS(110KW)
1.9 TDI 4motion	1J1\|150PS(110KW)
1.8 4motion	1J1\|125PS(92KW)
2.8 V6 4motion	1J1\|204PS(150KW)

Motor	Motorcode
1.8 T quattro	8N3\|245PS(180KW)
3.2 VR6 quattro	8N3\|250PS(184KW)
1.8 T quattro	8N3\|180PS(132KW)
1.8 T quattro	8N3\|224PS(165KW)
1.8 T quattro	8N3\|190PS(140KW)

Motor	Motorcode
S3 quattro	8L1\|224PS(165KW)
S3 quattro	8L1\|210PS(154KW)
1.8 T quattro	8L1\|150PS(110KW)
1.8 T quattro	8L1\|180PS(132KW)
1.9 TDI quattro	8L1\|130PS(96KW)

Motor	Motorcode
1.9 TDi Syncro	1M1\|150PS(110KW)

Motor	Motorcode
1.8 T 4x4	1U2\|150PS(110KW)

Steel Braided Brake Line Steel Flexible Brake Hose front Axle VW Golf MK4 R32 Audi A3 S3 A1 Ibiza Pol

✓ Length: 57cm
✓ M10x1 curved on the outside
✓ M10x1 straight on the inside

€117.73*

€109.49

Product number: SF100

Steel Brake Line Steel Brake Line Custom Configurator

✓ Desired dimensions
✓ Quickly configurable
✓ Length, color and connections freely selectable

€46.95*

€43.66

Product number: SF1

Go to product

Audi TT A3 S3 VW Golf Polo 6r WRC Brake Caliper Adapter Cayenne ZR17 Touareg BM5 Brake System 334x32

€148.46*

€138.07

Product number: 403

VW Golf MK3 R32 Corrado Passat Syncro Rear Brake Caliper Adapter S3 V6 280mm Brake Disc

✓ 288x221H0615301 Passat 35i VR6 VW brake disc
✓ 1-piston 8N0615423C / 8N0615424C VW Golf R32 V6 / S3 brake caliper
✓ rear axle

€151.77*

€141.15

Product number: 490

Audi VW Golf 4 Audi A3 S3 TT Camber correction plates Camber regolation

Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.

€54.96*

€51.11

Product number: 382-20N

Audi 80 100 A4 A6 Camber Correction Adjustement Plates 2 Degrees Negative Camber Rear Axle

✓ 2.0 degrees negative
✓ 5mm thickness
✓ suitable for Audi 80 100 A4 A6

€65.48*

€60.90

Product number: 563-20G

VW Golf 4 Polo VW Polo 6R WRC 9N Bora Audi A3 TT brake system brake caliper adapter GT3 911 996 Turbo 334x32

✓ 334x32 1J0615301AA 1J0615302A Golf 4 / R32 brake disc
✓ 4-piston 996351429 / 996351430 Big Red
✓ front axle

€164.44*

€152.93

Product number: 697

Golf MK4 3 VR6 Audi A3 1.8T Cable Gearbox Gear Changing Bush Bushing

✓ More direct shifting
✓ High-quality aluminum
✓ Golf 4 Audi A3 Seat with cable shift

€56.57*

€52.61

Product number: 730

VW Golf 4 R32 Polo VW Polo 6r WRC Audi S3 adapter brake caliper adapter rear axle 310x22 brake disc

✓ 310x22 3D0615601D VW Phaeton brake disc
✓ 1-piston 8N0615423C / 8N0615424C VW Golf 4 R32 / Audi S3 brake caliper
✓ rear axle

€134.29*

€124.89

Product number: 108

Ignition Coil Adapter VW Audi Seat Skoda 1,8T 2,7T TFSI Golf TT S3 Square Conversion Performance

✓ Easy conversion to better ignition coils
✓ For all 1.8T and 2.7L VAG engines
✓ Made in Germany

€44.93*

€41.78

€110.50* (59.34% saved)

Product number: 208-Sale140825

Wheel Hubs Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT Conversion to 5x112 V6 R32 PCD Adapter Front

✓ 5x112 bolt circle
✓ Plug & Play
✓ VW Golf 4 Bora / Audi A3 / Audi TT quattro

€148.90*

€138.48

Product number: APA121

VW Audi 02M 6-Speed Transmission Gearbox Reinforcing Plate Bracket Angle Drive

✓ Angle drive, gear reinforcement
✓ VW, Audi
✓ 02M/ 02Q 6-speed gearbox

€115.32*

€107.25

Product number: 836

VW Golf MK4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Brake Rear Axle

✓ 310x22 3D0615601D VW Phaeton brake disc
✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
✓ rear axle

€521.39*

€484.89

Product number: 878

VW Golf Mk4 Bora 1,8T Polo Audi A3 Brake Caliper Adapter Porsche Cayenne Rear Axle

✓ 330x22 4F0615601B Audi A6 brake disc
✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
✓ rear axle

€534.17*

€496.78

Product number: 887

Big Brake systems KIT Rear axle VW Golf 4 Bora 1,8T Polo VW Polo 6r WRC Audi A3 Porsche Cayenne - Farbe Bremssattel: Rot mit Epytec Logo

✓ 310x22 3D0615601D VW Phaeton brake disc
✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
✓ rear axle

€1,867.91*

€1,737.16

Product number: 878-KIT-RAL3001

Big Brake systems KIT Audi TT A3 VW Golf 4 Polo 9N Bora VW Polo 6R WRC ZR18 ZL18 Brake caliper 334x32mm Brake disc - Farbe Bremssattel: Rot mit Epytec Logo

€1,519.39*

€1,413.03

Product number: 143-KIT-RAL3001

VW Golf 4 Polo 6r WRC Bora Audi A3 TT Audi RS4 B7 365x34mm Porsche Z18 Bremsanlage Bremssattel Adapter

€222.26*

€206.70

Product number: 1292

VW Golf 4 Audi A3 adapter conversion master brake cylinder 27mm Porsche Cayenne Toureg Big Brake - With master brake cylinder and reservoir: Yes

€147.03*

€136.74

Product number: 1266-MH

VW Golf 4 Audi A3 Adapter Conversion Master Brake Cylinder 27mm Porsche Cayenne Toureg Big Brake - With master brake cylinder and reservoir: No

€51.44*

€47.84

Product number: 1266-OH