VW Golf Corrado Polo Passat Scirrocco Camber correction plates Camber regolation Rear axle
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
€38.09*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Product description
Correction plates for installation on rear axle.
Tailor-made for all VW/Seat vehicles with exception of Syncro/4x4 as:
- VW: Corrado, Golf 2 +3, Jetta Passat 35i, Scirrocco, Vento, Polo 86c/6n/9n
- Seat: Cordoba, Ibiza, Toledo
Recommanded for sporty driving on public road and for any kind of partecipation in races.
Technical information:
The correction plates are installed between axle and axle tap. Installation is simple and it’s excution doesn’t require much time.
The wheel lane widens only 3mm on every side.
The degree of tilt of every plate is negativ of 0.5.
Any plate typ with different degree of tilt can be delivered upon request.
Scope of delivery:
- 2x Correction plates for camber adjustment,galvanized.
With negativ degree of tilt of 0.5 - Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities)
Technical data:
Login
21 July 2019 15:10
steel-performer
Alles perfekt..!!
23 June 2022 18:04
Friedrich J
Alles bestens genau das Ergebnis was ich haben wollte
17 August 2019 11:39
vw-streese-pk
Super gerne wieder !!!
5 January 2018 18:47
basem100christian
Guter Kontakt. Gute Kommunikation.Ware im guten Zustand!
10 October 2018 08:07
nicholaulitzk_0
Bin sehr zufrieden
25 January 2019 10:43
Alberto. C
Guten Morgen, ich bewerte dieses Teil als sehr gut, Passgenauigkeit so wie Qualität. Danke, wieder mal gerne. Gruss
25 May 2020 18:49
Alexander F
Einfache montage, schön Verarbeitet, passt sehr gut. Einzige kleine Anmerkung: in schwarz wäre es unauffälliger bei der Achse, lässt sich aber eh lackieren!
3 November 2018 11:42
tuningladenshophot
alles super geklappt. mfg jd.s
15 March 2019 14:28
the_adventurer_58
Great service provided. Great product. Great price.
28 May 2022 09:33
toyotaraceidaira
recomendable
- Do I need longer screws or can the old ones remain in place?
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates with an angle of more than 2°, we recommend lightly sanding a washer and placing it under the screw head to ensure it remains flush with the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be required.
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.