You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter VW T5 T6 Porsche Panamera 82mm Mercedes Benz Brake Disc 375x36 Front Axle

€214.42*

Available
Delivery by Saturday, 11.05.2024 if you order within the next 8 Hours.
Product number: 1121
Weight: 2.862 kg
Einbauort: vorne
Material: Stahl (hochfest)

Brake caliper adapter on model VW T5 and T6 bus/transporter for conversion to the Porsche Panamera 6-piston Brembo calipers, combined with the bracke discs of  Mercedes ML 350 375x36.

Since the new brake disc is thinner than the originals, it may be that the rim cannot be fitted properly because it is at the disc centering point. In such a case, we recommend simply inserting 3mm universal plates in between to compensate for this. The spacer plates are included in the set, but can also be purchased individually, see below in "Suitable accessories".

Suitable for following vehicles:

  • VW T5 BUS / Transporter 
  • VW T6 BUS / Transporter 

Advantages of this brake system:

  • high deceleration, also in conjunction with our rear axle braking system
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Required components:

  • brake caliper: Porsche Cayenne 958 GTS Panamera , reference 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 (20.A221.03) (Shaft length from the caliper must be 82mm, see yellow mark on the last picture)
  • brake disc: Mercedes Benz GL - Klasse 375x36mm , reference 166 421 0912
  • brake pads must be slightly shaped at the upper edge 
  • pitch circle diameter 5x120 and hub bore 76,0 must be modified (service from EPYTEC for 149 € for the pair of brake discs) 
  • Depending on the axle, there may be a cast edge around the axle mount. This may have to be removed with a file so that the adapter can be screwed to the axle.

Delivery:

Tips, information and notes:

  • For better ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, where you can assemble and then install them according to your requirements.click here for the steel braided line configurator >>configure steel braided brake line<<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Material: Stahl (hochfest)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Passendes Zubehör

2x brake discs Zimmermann Sport 375x36mm rebored to 5x120 with hub bore 76mm
  • ✓ Zimmermann brake disc 375x36 Manufacturer's code 400.3684.20 rebored to 5x120 with hub bore 76mm for our adapters article 942 and article 1121

€368.95*
Artikelnummer: ZIM170-765X120
Steel Braided Brake Line VW T5 T6 Bus Transporter Porsche Brembo TTRS Audi Porsche Panamera Cayenne Brake Conversion
  • ✓ for e.g VW T5 T6 bus / transporter
  • ✓ connection 1 M10x1 external thread bent
  • ✓ connection 2 M10x1 internal thread straight
  • ✓ length 60cm  / transparent covered

€83.52*
Artikelnummer: SF112
Brake Caliper Epytec 6-Piston Porsche Cayenne Macan Panamera Tuning Brake System Front Axle
Epytec 6-piston brake caliper installed on Porsche Cayenne, Macan, Panamera and many others

€767.83*
Artikelnummer: 1177
VW Golf MK4 MK5 MK6 MK7 Audi A3 S3 TT Seat Skoda Tool Rim Mounting Rim Assembly M14x1,5
  • ✓ auxiliary tool for rim assembly of all vehicles  with M14x1,5 thread on the wheel hub, for example, VW Golf MK4, MK5, Audi A3 etc.

€20.09*
Artikelnummer: 916
You can find out everything about your order via your -> View customer account