VW Golf R32 Corrado 1 2 3 S3 Rear Brake Caliper Adapter G60 VR6 256x22
- ✓ 256x22 8L0615601 R32 / S3 brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
€95.31*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for Golf MK1 MK2 MK3 to install rear internally vented brake system from Golf MK4 V6/R32 Audi S3 8L, YoC 1999, (256x22 bracke disc).
Suitable for the following VW and Seat models:
- Golf 2 3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Polo 9N
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
- Golf 1 (Nur bei Umbau auf 5x100 Lochkreis/Passende Radnaben für die Vorderachse gibt es bei uns im Shop)
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- registration is possible by using original VW / Audi parts
- better eperformance
- 5x100 P.C.D. is maintained
- cheap spare parts
Required components:
- R32/S3 bracke discs rear (256x22 5x100 P.C.D)
- R32/S3 bracke caliper rear
- Brake caliper carrier part number: 8N0615425B
- axle pin, reference. 6XO 501 117 and 6XO 501 118 (right and left) built in Polo 1995-2002 und Lupo 1999-2006 article APA259
- Polo 9N hub, part number FAG: 713610490
Other conversion options:
As can be seen from the pictures of our customers, it is possible with this system to install the brake discs Phaeton 310x22, combined with brake calipers of the Golf 5 R32.
Delivery:
- 2x adapter plates
- 2x spacer plates
- copy of vehicle documents to simplify the registration
- material certificate
For the front axles, we propose you caliper adapters for conversion to Porsche brake system, combined with R32 brake discs. Visit our shop!
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
19 November 2018 17:16
Alexander L
Schnelle Lieferung der bestellten Adapter, so wie beschrieben und 100% passgenau! Bei den nächsten benötigten Teilen, definitv meine erste Wahl! Vielen Dank!!
13 August 2021 14:23
Borja B
Great product, it fits perfect with the 256mm disc and S3/R32 rear brackes.
15 October 2023 10:37
Christian H
Alles super, so soll es sein
21 October 2021 16:44
Gary K
Fantastically produced products
4 August 2019 19:55
Tobias S
Super Produkt! Produkt ist super! Schrauben könnten dabei sein! Jedem Schrauben mitliefern! Weil ihr die besten seid! Nein! Hervorragend
21 October 2021 17:17
Olaf J
Sehr gut.
15 November 2023 20:42
Benjamin M
Passt perfekt 👍
31 December 2021 10:44
Tobias S
Top Qualität alles dabei was mann braucht! Einbau super einfach! Und durch die vielen Papiere ist die Eintragung kein Problem!
7 May 2020 09:34
Peter M
passte perfekt
21 October 2021 05:01
Gary K
10/10 fantastic well produced product Would definitely recommend to friends Came recommended on Facebook posts Parts not yet fitted. Ive no worries about it not performing well as Ive not seen any bad reviews
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
- ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
- ✓ front axle
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Desired color can be selected
- ✓ Golf 4 R32 1-piston brake calipers
- ✓ 8N0615423C / 8N0615424C / 1J0615425
- ✓ 256x22
- ✓ 65mm centering
- ✓ 37mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ 256x22
- ✓ 65mm centering
- ✓ 65mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 256x22
- ✓ 65mm centering
- ✓ 37mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ 256x22
- ✓ 65mm centering
- ✓ 20mm height
- ✓ Adapter rings Golf 3, Polo 9N wheel hub
- ✓ ABS sensor
- ✓ Mark 20 conversion
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ For Golf 4 R32 brake
- ✓ Golf 1 Golf 2 Golf 3
- ✓ original equipment manufacturer quality
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track