Brake caliper adapter Golf 7R Audi A3 8V Brake disc 356x22 Audi A6 Porsche Cayenne 4-piston brake caliper with TÜV parts certificate
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
Brake caliper adapter to convert the rear axle from the Golf Mk7, Audi A3 series to Porsche Cayenne brake calipers.
Combined with the Audi A6 A7 brake discs 356x22 mm.
The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, these do not have handbrake functions. The rear axle of Golf Mk7R is additionally used for a handbrake caliper adapter. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.
This set includes a parts certificate for simple registration in accordance with §19.3 StVZO, so that trouble-free approval by TÜV, DEKRA, KÜS or GTÜ is possible.
Suitable for the following VW and Seat models with aluminium axle - manufacturer number: 5Q0505435J / 5Q0505436J , 5Q0505435G / 5Q0505436G, 5Q0505435H / 5Q0505436H
- VW Golf 7
- VW Golf 7R
- Audi A1 8X
- Audi A3 8V
- Seat Leon ST 5F
- Skoda Octavia III 5E
Advantages of this brake system:
- Parts certificate for simple and problem-free registration
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificate
Save money on registration:
- A normal individual TÜV approval for brake systems often costs more than €600. Thanks to our TÜV-approved parts certificates, you usually only pay around €90 for the registration of the brake system*!
Here you have a report on the successful creation of the parts certificate at the TÜV (click here)
Required components:
- brake caliper: Porsche Cayenne, rear xale, reference 955.352.421 + 955.352.422 / Brembo reference 20.7673.03 + 20.7673.04
- original brake calipers with carrier for handbrake from Golf 7R part number:
- Part number brake caliper: 5Q0615424 / 5Q0615424
- Part number brake caliper carrier: 5Q0615425 / 8V0615425B
- brake disc: Audi A6 A7 356x22 mm, reference 4H0 615 601 F
Delivery:
- 2x brake caliper adapters for Golf Mk7 Audi A3 series, rear axle
- 2x centric rings
- high strength mounting screws
- material certificate
- incl. parts certificate for registration with TÜV, DEKRA, KÜS or GTÜ
- Stress analysis / FEM calculation for entry
- Installation instructions (click here)
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen, um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren << - Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den längeren Weg auszugleichen
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
26 April 2024 17:32
Riccardo T
Very good components
23 March 2024 23:46
johndawson06512
Look forward to doing business with again
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: