Steel Braided Brake Line VW Golf MK5 MK6 MK7 GTI R23 Audi A3 S3 V6 Brembo TTRS Brak Conversion Rear Axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
€98.40*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Longer steel braided brake line / steel flexible brake hoses, including material certificate, for conversion to larger brake system for example Brembo 4-6 piston brake caliper installed into Porsche or TTRS.
Suitable for the following models:
- Golf MK5 / MK6 / MK7
- Seat
- Audi A3 / S3
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- protection against the rodents
- incl. parts certificate for problem-free registration
- great optics
Technical data:
- length: 42 cm
- connection 1 M10x1 external thread bent
- connection 2 M10x1 internal thread straight
- sealing 90° connection: E and F. Our fittings are so-called hybrid, which means that every connection fits no matter whether concave and convex
Delivery:
- 2x steel braided brake lines for VW Golf MK5 / MK6 / MK7 Audi A3, etc
- material certificate
We also manufacture according to desired dimensions. With our steel braided lines configurator (click here), you can configure your steel braided brake line, according to your wishes. (Length, color and connections)
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
5 October 2023 08:16
Kevin M
Anschlüsse sowie die gesamte Verarbeitung und Passgenauigkeit sehr gut.
9 May 2022 16:30
Steven M
Sehr gut verarbeitet top Produkt kann ich nur jedem empfehlen
5 November 2020 10:09
Christophe B
Très bon produit
25 March 2020 12:32
Werner D
Alles passt genau
24 October 2021 15:50
Marcel S
Passt top, kaufe schon öfters bei epytec ein. Sehr freundlichen Telefon Service und auch top Angebote.
23 March 2023 06:53
Derooy T
Parfait 👌🏻
5 November 2020 10:09
Christophe B
Très bon produit
31 March 2022 02:23
Hendrik L
Ich habe mich für die Stahlflexleitungen von Epytec entschieden, da die Beschreibung des Produktes und die Qualität einfach top sind. Ich würde jedem die Leitungen weiterempfehlen. Die Verarbeitung ist erstklassig und ich fahre die Leitungen auf der Vorder- und Hinterachse. Ich würde die Stahlflexleitungen immer wieder bei Epytec bestellen.
- Does the steel braided brake line also fit other vehicles?
Yes, the brake line can be used in many other vehicles as well. Since almost all car manufacturers use the same size of thread for brake line fittings. Often the only difference is the concave or convex sealing surface. Our fittings are so-called hermaphrodite, which means that each fitting is suitable, concave (valley) and convex (mountain). All you have to do is measure the length and find out the thread size of the fitting you want for your line. So you can see if the line is suitable. You can find the exact details of the brake line in the product description under the technical data.
- There were 2 lens seals supplied with the steel faux lines. Where exactly are these installed?
the lens seals are always included with the orders. They are used to balance the cone, depending on the cone of the steel tube, see picture attached. With flare F you do not need the lens seals, with flare E they must be placed in the internal threads. The direction, which way around, does not matter.
