Brake Caliper Adapter Audi 200 20V V8 Audi 100 UFO Suspension Strut Adapter Porsche Cayenne ZR18 Bremssattel
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
€153.28*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on models Audi 100 200 and Audi V8, for conversion to Porsche Cayenne ZR 18 brake caliper, combined with the brake discs Mercedes 350x32mm.
Suitable for all models with UFO suspension strut / coilover.
We have included the adapters in our assortment with our partner 5-inline, Imkerweg 26, in 32832 Augustdorf. They like to install the adapters for you and also take care of the TÜV inspection (german technical inspection).
Advantages:
- the AUDI pitch circle diameter of 5x112 mm can be retained. No cost-intensive Porsche bolt circle conversion.
- cheap brake discs. You get the pair already for about 180 €.
- only minor adjustments onto strut and hub necessary
- can always be restored to the original state without any problems
- double using the service life compared to the original brake system
- adapters are made of high strength steel alloy (including material certificate)
- adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehiclesDurch das im Lieferumfang enthaltene Material Zertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
Required components:
- brake disc: Mercedes 350x32 , reference 164 421 1412
- brake caliper: Porsche Cayenne Z18 , reference 95535142153 / 95535142253
- wheel hub and axle journal have to be slightly modified
- it must be ensured that the calipers has enough air at the ends, if already varnished several times, then if necessary, easily sand the edge
- The brake disc must be screwed on at the hub bore to 68mm
Delivery:
- 2x brake caliper adapte for UFO suspension strut / coilover
- 2x hub centric rings
- high-strength mounting screws
- material certificate
- Template to check whether the brake system fits under your rim
- installation instructions
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 December 2018 20:07
Noah H
Produkt wirkt sehr solide. Wird einerdings erst nächstes Jahr im März verbaut. Ich freue mich schon ungemein auf den Umbau. :)
13 January 2019 20:20
Karl H
Super Lösung, gerade weil die ewige Suche nach hp2 Federbeinen entfällt. Leider nicht mehr auf Original Rückrüstbar, da die obere Bohrung für die UFO Bremse nahezu entfernt werden muss. Allerdings will man die Bremse auch nicht wieder missen. Hab mir andere Hülsen machen lassen zum ausrichten des Bremssattels, da dieser nach dem Umbau etwas aussermittig zur Bremsscheibe sitzt und diese somit unten zum schleifen neigt. Ich gebe Bescheid wie es passt und ob es funktioniert wie ich mir das denke. Nur zu empfehlen, preislich nicht teurer als neue UFO bzw. Umbau auf Hp2 mit geilem Ergebnis!!!
1 February 2021 06:39
Marco M
Super Passgenauigkeit! Top Beratung! Immer wieder gerne! Danke Ulli !!!!
18 December 2021 11:20
Vitalij H
danke für die Teile, sind verbaut und Funktionieren.
24 August 2021 18:35
Oliver K
Klasse das sich mal Jemand Gedanken um so Nischenkarren wie den Audi V8 gemacht hat und was passendes ohne viel Gedööööns für die Bremse anbietet, da die Preistreiberrei bei den S4 oder S6 Federbein-Radlagergehäusen ja kaum noch Finanzierbar ist oder man den Übelsten Schrott kaufen muss. Optisch als auch vom Material her scheint das Ganze recht wertig und man kann die Gute Deutsche Wertarbeit sehen. Bin mal gespannt da die Nabenbohrung bei den Bremsscheiben ja wohl noch abgedreht werden muss, wer mir das macht. Mal sehen ich freu mich schon auf den Umbau und hoffentlich passen die Stahlflexleitungen auch noch zu den ZR18 Bremssätteln.
15 July 2023 14:04
Maximilian F
Produkt ist echt gut aber der Bremssattel kann nicht symetrisch verbaut werden Ab der unteren Seite ist er sehr nah an der Bremsscheibe. Mit freundlichen Grüßen
16 July 2023 09:33
Maximilian F
Produkt ist echt gut aber der Bremssattel kann nicht symetrisch verbaut werden Ab der unteren Seite ist er sehr nah an der Bremsscheibe. Mit freundlichen Grüßen
- What exactly has to be done on the steering knuckle?
The original caliper is attached to the UFO shock absorber with 3 screws. The third fixation at the top should be removed and the small offset on the steering knuckle should be rectified by being sharped flat so that the adapter lay flat.
- The original caliper is attached to the UFO shock absorber with 3 screws. The third fixation at the top should be removed and the small offset on the steering knuckle should be rectified by being sharped flat so that the adapter lay flat.
???
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 312x25
- ✓ 67mm centering
- ✓ 34.4mm height
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 350x32
- ✓ 67mm centering
- ✓ 55mm height
- ✓ 350x32
- ✓ 67mm centering
- ✓ 55mm height
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ 335x22 4E0615601L 240122-02141 Audi A8 brake disc
- ✓ 1-piston 4B0615424 Girling 41 / 43 brake caliper
- ✓ rear axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 350x32 1644211412 Mercedes brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
- ✓ front axle
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N
- ✓ 350x32
- ✓ 68mm centering
- ✓ 54.5mm height
- ✓ Thread M14x1.5
- ✓ ensures comfortable installation of your upgrade brake
- ✓ makes work easier
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ Desired color can be selected
- ✓ ZR18 / ZL18 Cayenne brake calipers
- ✓ 95535142153 / 955.351.421.53 95535142253 / 955.351.422.53 7L6615123Q / 7L6615149 / 7L6615123J / 7L6615123N