VW T3 Transporter Brake Caliper Adapter before Year of Manufacture 1986 Audi Ate 57 Brake Caliper 312x25 Front Axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston C4 Girling/ ATE 57 4A0615123A / 4A0615124A Audi 100 / A6 brake caliper
- ✓ front axle
£124.09*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on model T3 transporter for conversion to internally vented 312x25mm brake discs, combined with the Audi A6 calipers.
Suitable for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle
Advantages:
- top deceleration
- the system no longer warms up and no more fading
- very cheap components. You can find second-hand caliper from 49.- € / new from 70.-€
- thanks to the material certificate supplied with the order, it is possible to register your purchase
- quick and easy assembly with the supplied mounting screws
Required components:
- brake disc: Audi A4 quattro, Audi A6 312x25mm, reference e.g 4B0 615 301 A
- Brake caliper: Audi 100/A6 C4 Girling/ ATE 57, reference 4A0615123A + 4A0615124A (left,right)
- brake caliper mounting brackets that were installed with the 288 brake system (required because of the shorter design of the bracket)
- wheel hubs to center the brake disc are also available in our shop.
- since the screwing surface for the adapter is not level, it must be planned before installing the adapter so that the adapter fits properly.
At least 16 inch rims should be used so that the diameter of the brake disc fits underneath
Hint:
This adapter is for all T3 bus before Bj 86 is yours after Bj 86 you need the >> adapter with the article no: 346 <<
Delivery:
- 2x brake caliper adapters for VW T3 transporter, manufactured before 1986 with M12 screw mount on the axle<
- matching centering rings
- set of high-strength screws
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 2.1 | 25|95PS(70KW) |
| 2.1 | 24|95PS(70KW) |
| 1.9 | 24|90PS(66KW) |
| 1.6 TD | 25|69PS(51KW) |
| 1.6 D | 24|50PS(37KW) |
| 1.9 | 25|78PS(57KW) |
| 2.0 | 24|69PS(51KW) |
| 2.1 | 24|112PS(82KW) |
| 1.6 | 24|50PS(37KW) |
| 2.1i | 25|92PS(68KW) |
| 1.9 | 25|60PS(44KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 24|78PS(57KW) |
| 1.7 D | 24|57PS(42KW) |
| 1.9 | 24|83PS(61KW) |
| 1.9 | 24|60PS(44KW) |
| 2.0 | 25|69PS(51KW) |
| 1.9 | 25|90PS(66KW) |
| 1.6 D | 25|50PS(37KW) |
| 1.6 TD | 24|69PS(51KW) |
| 1.7 D | 25|57PS(42KW) |
| 2.1 | 25|112PS(82KW) |
| 2.1i | 24|92PS(68KW) |
| 1.6 | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD | 25|70PS(51KW) |
| 2.1 | 25|112PS(82KW) |
| 1.9 | 25|60PS(44KW) |
| 2.1i | 25|92PS(68KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 1.6 | 25|50PS(37KW) |
| 1.7 D | 25|57PS(42KW) |
| 2.1 | 25|95PS(70KW) |
| 1.9 | 25|90PS(66KW) |
| 2.0 | 25|70PS(51KW) |
| 1.6 D | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 D | 24|50PS(37KW) |
| 1.9 | 24|60PS(44KW) |
| 1.9 | 24|83PS(61KW) |
| 2.1i | 24|92PS(68KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD | 24|70PS(51KW) |
| 1.9 | 24|78PS(57KW) |
| 1.7 D | 24|57PS(42KW) |
| 2.1 | 24|112PS(82KW) |
| 2.0 | 24|69PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 21|50PS(37KW) |
| 1.6 | 26|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 2.1 | 25|95PS(70KW) |
| 2.1 | 24|95PS(70KW) |
| 1.9 | 24|90PS(66KW) |
| 1.6 TD | 25|69PS(51KW) |
| 1.6 D | 24|50PS(37KW) |
| 1.9 | 25|78PS(57KW) |
| 2.0 | 24|69PS(51KW) |
| 2.1 | 24|112PS(82KW) |
| 1.6 | 24|50PS(37KW) |
| 2.1i | 25|92PS(68KW) |
| 1.9 | 25|60PS(44KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 24|78PS(57KW) |
| 1.7 D | 24|57PS(42KW) |
| 1.9 | 24|83PS(61KW) |
| 1.9 | 24|60PS(44KW) |
| 2.0 | 25|69PS(51KW) |
| 1.9 | 25|90PS(66KW) |
| 1.6 D | 25|50PS(37KW) |
| 1.6 TD | 24|69PS(51KW) |
| 1.7 D | 25|57PS(42KW) |
| 2.1 | 25|112PS(82KW) |
| 2.1i | 24|92PS(68KW) |
| 1.6 | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 TD | 25|70PS(51KW) |
| 2.1 | 25|112PS(82KW) |
| 1.9 | 25|60PS(44KW) |
| 2.1i | 25|92PS(68KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 1.6 | 25|50PS(37KW) |
| 1.7 D | 25|57PS(42KW) |
| 2.1 | 25|95PS(70KW) |
| 1.9 | 25|90PS(66KW) |
| 2.0 | 25|70PS(51KW) |
| 1.6 D | 25|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.6 D | 24|50PS(37KW) |
| 1.9 | 24|60PS(44KW) |
| 1.9 | 24|83PS(61KW) |
| 2.1i | 24|92PS(68KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD | 24|70PS(51KW) |
| 1.9 | 24|78PS(57KW) |
| 1.7 D | 24|57PS(42KW) |
| 2.1 | 24|112PS(82KW) |
| 2.0 | 24|69PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 21|50PS(37KW) |
| 1.6 | 26|50PS(37KW) |
- ✓ 280x12 7D0615601 VW BUS T4 brake disc
- ✓ 1-piston 7D0615424B VW BUS T4 brake caliper
- ✓ rear axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ VW T2/ T3 Bus
- ✓ AFN1.9 TDI PD 116 HP engine, transverse installation
- ✓ simple engine conversion
- ✓ VW T2/T3 Bus
- ✓ 1.9l TDI (90PS) 1Z engines
- ✓ simple engine conversion
- ✓ VW T3 Bus/Syncro TDI engine conversion
- ✓ Golf 3 starter
- ✓ 0 001 125 012/013 (2.0 KW),0 986 017 460 (2.0 KW)
- ✓ gear adapter plate
- ✓ suitable for VW T3 BUS / box
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ drive shaft adapter
- ✓ VW T3
- ✓ 012 Audi gearbox
- ✓
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ VW T3 bus
- ✓ 012 VW / Audi 5-speed
- ✓ simple engine conversion
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
- ✓ 288x25 4A0 615 301 Audi A4 Quattro / Audi A6 brake disc
- ✓ 1-piston Girling / ATE 57 4A0615123A / 4A0615124A Audi 100 /A6 brake caliper
- ✓ front axle
- ✓ switching shaft adapter
- ✓ suitable for VW T3 Bus
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 280x12 7D0 615 601 VW BUS T4 brake disc
- ✓ 1-piston 701615424 VW BUS T4 brake caliper
- ✓ rear axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 BUS
