With our large high-performance brake system kit for the VW Touran, Jetta, Audi TT series and many other vehicles, you can upgrade your rear axle to a 4-piston brake system in combination with the VW Golf 5R/ 6R handbrake caliper and achieve ideal performance.
- Brake calipers: Porsche Cayenne 4-piston brake calipers
- Handbrake calipers: VW Golf 7R handbrake caliper
- Brake discs: 355x22 mm Epytec ceramic brake discs
With this high-performance brake system kit / big brake kit, you can run the Porsche Cayenne 4-piston brake calipers and the VW Golf 7R handbrake caliper in combination with the Epytec ceramic brake discs 355x22 mm from the Audi A6 A7 on the VW Touran, Jetta, Audi TT series and many other vehicles.
The largebrake system kit is not only sporty, but also suitable for everyday use and, thanks to the drilled sport brake discs in combination with our ceramic pads, enables ideal performance while simultaneously reducing brake dust, temperature, and wear.
With this high-performance brake kit, you can get started right away and have everything you need to upgrade your rear axle to a 4-piston brake system.
The large high-performance brake system kit / big brake kit is suitable for the following VW and Seat models with aluminum axle OE: 5QA505433A / 5QA505434A
- VW Touran
- VW Jetta
- Audi TT
- Skoda Octavia III
- VW T-Roc
Advantages of this brake system:
- our components, such as brake calipers, come from production vehicles and are OE parts. This makes replacing the brakes simple and straightforward and facilitates TÜV approval.
- thanks to the included material certificate, registration via individual approval is also possible for production vehicles
- high-performance brake pads with a longer service life than original pads
- extreme braking performance values also in combination with our rear axle brake system
- direct fitment to the models listed above and therefore can be converted back to the original condition at any time without problems
- our EPYTEC brake caliper adapters do not require sending in your original parts, welding, milling, or redrilling.
Note:
Please note that these brake calipers are supplied in your desired color, according to your specifications.
Secure our high-performance brake system kit now and experience ideal performance and durability.
Suitable for all listed vehicles equipped with an aluminum steering knuckle (not suitable for vehicles with steel steering knuckles)
VW Golf 7R handbrake caliper is not included in the scope of delivery. If not already installed as original equipment, it must still be sourced separately:
- original brake calipers with carrier for handbrake from Golf 7R part number: 5Q0615424 / 5Q0615424 carrier: 5Q0615425 / 8V0615425B
Scope of delivery:
- 2x Porsche Cayenne brake calipers part number: 955.352.421/ 955.352.422 (left / right) including complete new retaining clip kit for the brake calipers: painted in desired color
- matching set of Epytec ceramic brake discs
- ceramic brake pads for less brake dust and longer service life
- 2x brake caliper adapters for VW Touran, Jetta, Audi TT series and many more
- 2x matching braided steel brake lines
- Installation aid for brake disc assembly
- high-strength screw hardware
- material certificate
- stress analysis / FEM calculation for registration
- installation instructions (click here)
FAQ: Häufige Fragen
Sollte ich die Anker- bzw. Staubbleche entfernen?
Wir empfehlen das Entfernen der Bleche, da sie die Belüftung einschränken. Ohne diese Barriere wird die Bremse effizienter gekühlt und bleibt auch bei starker Beanspruchung leistungsfähig.
Wie erleichtere ich mir die Felgenmontage?
Mit Radmontagehilfen gelingt das Ausrichten und Aufsetzen der Felge einfacher und präziser. Das schützt Gewinde und Felge und spart Zeit.
Radmontagehilfe ansehen
Benötige ich Spurverbreiterungen nach dem Umbau?
Welche Felgengröße passt, lässt sich pauschal nicht sagen. Streift die Felge minimal am Bremssattel, schaffen Spurverbreiterungen den nötigen Abstand.
Spurverbreiterungen ansehen
Brauche ich neue Bremsleitungen?
Für optimale Passform und stabile Bremswirkung empfehlen wir Stahlflex. Diese sind konfigurierbar und liefern konstantere Ergebnisse als Gummileitungen.
Stahlflex konfigurieren
Warum unsere Adapter die beste Wahl sind
Wusstest du, dass sich dein EPYTEC-Adapter oft schon nach dem ersten Verschleißteilwechsel komplett bezahlt macht?
Das liegt daran, dass du mit unseren Adaptern auf OE-Bremsscheiben und -Sättel setzt, die wir bewusst bei der Entwicklung der Adapter ausgewählt haben. Diese Komponenten sind nicht nur in höchster Qualität gefertigt und in Serienfahrzeugen im Einsatz, sondern durch ihre Großserienproduktion auch günstig und jederzeit verfügbar.
Für dich bedeutet das: erstklassige Bremsleistung ohne Abhängigkeit von teuren Speziallösungen anderer Hersteller.
Und selbst beim TÜV hast du es leichter, denn unsere OE-Komponenten sind bereits offiziell abgenommen – der Prüfer kann sich direkt darauf beziehen, sodass deine Eintragung unkompliziert und sicher abläuft.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.