Brake Caliper Adapter Audi S1 A3 S3 RS3 8V Golf Mk7 Seat Leon Skoda Octavia Brake Disc 356x22 Audi A6 original Brake Caliper
- ✓ 356x22 4H0615601F Audi A6 brake disc
- ✓ 1-piston 8V0615425B Golf 7 / Audi S3 RS3 brake caliper
- ✓ rear axle
€163.21*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle (manufacturer reference: 5Q0505435), on the models listed below, for conversion to the brake discs 356x22 mm A6 or RS7, combined with the original brake calipers.
Suitable for the following vehicles with aluminum axle, manufacturer reference: 5Q0505435:
- Audi S1 Quattro
- Audi A3 8V Quattro
- Audi S3 8V Quattro
- Audi RS3 8V Quattro
- Golf Mk7 Quattro
- Golf Mk7R Quattro
- Seat Leon ST Quattro
- Skoda Octavia 3 Quattro
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake disc: internally ventilated 356x22 Audi A6, reference 4H0 615 601 F / or the perforated Wave brake disc from the Audi RS7 356x22 mm, reférence 4G8.615.601
- brake caliper: original Golf Mk7 Audi S3 RS3, reférence 8V0615425B
- brake pad: original, reférence 8V0 698 151G
Info:
If you want to drive with a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (reference: 4G8.615.601) also fits, since the Audi S6 S7 S8 brake disc is not perforated. The brake discs are otherwise exactly identical in terms of dimensions.
Delivery:
- 2x brake caliper adapters for VW Golf Mk7, Audi S1, Audi A3, S3, RS3, Seat Leon ST, Skoda Octavia 3, etc.
- high strength mounting screws
- centering rings
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen, um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren << - Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den längeren Weg auszugleichen
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
25 January 2024 15:45
Gerardo R
Buono
24 February 2024 14:34
Adrien F
Bon matériel de qualité
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 390x36 1664210512 Mercedes GL 500 brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 370x34 8V0615301R Audi RS3 brake disc
- ✓ 8-piston 8T0615107D / 8T0615108D Audi RS brake caliper
- ✓ front axle
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
