Braided steel brake line VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta Brembo Porsche TTRS Brake conversion

✓ Length: 52cm
✓ M10x1 outside 45° curved
✓ M10x1 inside straight

€98.34*

Available

Product number: SF125

Delivery by Wednesday, 27.11.2024 if you order within the next 17 Hours.

Product number: SF125

Weight: 0.26 kg

Anschluss 1: M10x1 Innengewinde

Anschluss 2: M10x1 Aussengewinde

Länge: 52

Your benefits

Easy TÜV registration
Quality Made in Germany
Fair prices without middlemen you buy directly from the manufacturer and developer of the product
Worldwide no. 1 in tuning adapters
15 years expert knowledge
10 years warranty

Longer steel flex brake line with parts certificate for conversion to larger brake systems, e.g. Brembo 4-6 piston brake calipers installed in Porsche or TTRS.

Suitable for the front axle of the following models:

Golf 1
VW Golf 2 und 3
VW Passat
VW Corrado
VW Jetta
VW Polo
Seat Toledo

Advantages compared to original brake lines:

No pressure loss when the brakes are applied, resulting in a noticeably more precise pressure point
simple installation, the original line is simply replaced by the steel flex line
No swelling as with rubber lines
cost savings, as steel flex lines have an almost unlimited service life and do not need to be replaced every 3-5 years
shorter braking distance
marten safety
incl. parts certificate for easy registration
great optic

Technical data:

Length: 52 cm
Connection 1 M10x1 male thread bent 45°
Connection 2 M10x1 female thread straight
Flare 90° our fittings are so-called hermaphrodites, which means that every connection fits regardless of whether it is concave or convex

Scope of delivery:

2x braided steel brake lines for VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta etc...
incl. parts certificate for easy registration

We also produce customised sizes. With our steel flex brake line configurator (click here), you can configure your steel flex brake line according to your wishes. (length, colour and connections)

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Technical data:

Anschluss 1: M10x1 Innengewinde

Anschluss 2: M10x1 Aussengewinde

Länge: 52

Anschluss 1: M10x1 Innengewinde

Anschluss 2: M10x1 Aussengewinde

Länge: 52

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Simply use your social account to log in to our shop. In a few steps you are logged in and can complete your account!

I have read the privacy policy and agree to it

No reviews found. Share your insights with others.

Does the steel braided brake line also fit other vehicles?
Yes, the brake line can be used in many other vehicles as well. Since almost all car manufacturers use the same size of thread for brake line fittings. Often the only difference is the concave or convex sealing surface. Our fittings are so-called hermaphrodite, which means that each fitting is suitable, concave (valley) and convex (mountain). All you have to do is measure the length and find out the thread size of the fitting you want for your line. So you can see if the line is suitable. You can find the exact details of the brake line in the product description under the technical data.
There were 2 lens seals supplied with the steel faux lines. Where exactly are these installed?
the lens seals are always included with the orders. They are used to balance the cone, depending on the cone of the steel tube, see picture attached. With flare F you do not need the lens seals, with flare E they must be placed in the internal threads. The direction, which way around, does not matter.