VW Golf Corrado Polo Passat Scirrocco Camber correction plates Camber regolation Rear axle
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
€48.05*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Product description
Correction plates for installation on rear axle.
Tailor-made for all VW/Seat vehicles with exception of Syncro/4x4 as:
- VW: Golf 2+3, Corrado, Jetta, Passat 35i, Scirocco, Vento, Polo 86c, 6n, 9n
- Seat: Cordoba, Ibiza, Toledo
Allows a perfect camber adjustment.This guarantees a even consumption of your tires.
Recommanded for sporty driving on public road and for any kind of partecipation in races.
Technical information:
- The correction plates are installed between axle and axle tap.
- Installation is simple and it’s excution doesn’t require much time.
- The wheel lane widens only 3mm on every side.
- The degree of tilt of every plate is negativ of 1.5.
Any plate typ with different degree of tilt can be delivered upon request.
Scope of delivery:
- 2x Correction plates for camber adjustment, galvanized. With negativ degree of tilt of 1.5
- Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities)
Technical data:
Login
25 September 2016 17:22
komressorroc
alles bestens danke
8 February 2022 12:20
Matthias N
Sehr gute Qualität, Passgenauigkeit und Lieferzeit Ich werde diesen Artikel und Shop weiterempfehlen
29 September 2017 10:58
pentium3066
alles top, immer wieder gerne
30 November 2018 23:39
07oldschool
Top gerne wieder .
31 March 2020 10:44
engel-eisbaer2012
Alles wunderbar gelaufen, sehr gerne wieder
7 December 2017 09:23
tabeavogel
Alles super
13 December 2017 11:15
mathias5605
ALLES BESTENS. TOP WARE. SCHNELLER VERSAND
7 February 2023 08:15
Thorsten S
Gute Qualität
7 January 2018 01:01
markinosbtt
Good seller
14 September 2019 12:16
corrado-8v-kompressor
Super Danke!!!
- Do I need longer screws or can the old ones remain in place?
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates with an angle of more than 2°, we recommend lightly sanding a washer and placing it under the screw head to ensure it remains flush with the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be required.
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.