Wheel Spacer PCD Adapter VW 4x100 to 4x108 Audi 20mm 1tlg. Track Plate
- ✓ 4x100 to 4x108
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
€64.25*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High-strength wheel spacer / PCD Adapter suitable for all VW with PCD 4x100 and hub centric 57,10mm.
Thanks to this adapter, all Audi rims compatible with a 5x130mm PCD can be mounted.
- enlargement per wheel: 20mm
- enlargement per axle: 40mm
- internal hub centric: 57,10mm
- external hub centric Audi: 57,10mm
- screw thread on adapter: M12 x 1,5
All components are made of high quality aluminum. All screws provided are high-strength (10.9).
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Delivery:
- 2x adapters / spacers for one axle
- complete mounting screws set, high-strength (10.9)
- TÜV - certificate for registration
- Installation instructions
This offer is only for one axle. For a complete equipment of your vehicle, please order 2 times. The item is also available with the thickness of your choice. You can thus compose the kit to the required thickness.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
25 June 2018 17:36
vw_derby_erfurt
gerne wieder
23 January 2018 20:58
brianstorm2009
Perfekter After-Sale Service
27 March 2024 12:02
rollesbolles
Top Verkäufer, Top Kommunikation, gerne wieder.
9 July 2024 07:14
puma2000-2013
Schnelle Lieferung, gute Qualität
13 October 2024 00:28
wagnersilvio
sehr schneller versand und qualität ist TOP!!!
8 July 2024 16:21
puma2000-2013
Schnelle Lieferung, gute Qualität
26 October 2024 17:23
vr6spezial
Alles super!
3 November 2024 21:24
SATABIN X
Très bon produit ce monte très bien
25 June 2024 17:59
vicflor-58
expérience globalement positive mais "inquiétante". Je n'étais pas avisé de l'envoi de ma commande d'ou cette inquiétude .Je pensais recevoir 16 vis tete plate M12x1.5 au lieu des 8 reçues .Je dois donc rechercher 8 vis
21 May 2018 10:39
stromerjoe
schnelle Lieferung und top Qualität
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing