Wheel spacer Golf 2 3 Corrado Polo Passat Scirrocco 1 2 3 G60 VR6 VW 5 mm / 10mm - Widening per wheel: 5 mm
- ✓ Suitable for the rear axle: Golf 2, 3, Corrado Vento, Scirocco, Seat Ibiza, and many more.
- ✓ Track plate for behind the axle pivot
- ✓ Widening per wheel: 5 mm
€25.74*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Finally, wheel spacers without changing the wheel hub and putting additional load on the suspension!
The wheel spacers are 5 mm thick (10 mm widening per axle) and are fitted between the axle and the axle journal, not between the wheel and the rim like others.
Advantages:
- No longer wheel bolts necessary
- Bearings are not subjected to any additional load as with conventional track plates, where the lever on the axles is larger and the suspension is therefore subjected to greater stress.
- Not visible from the outside
- No annoying shifting of the track plate when changing wheels.
- Can be restored to original condition at any time
Adapters are suitable for the following VW and Seat models:
- Golf 1 (only in conjunction with our axle spigots, which we have in our range)
- Golf 2 3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
Scope of delivery:
- 2 wheel spacers 50 mm (10 mm widening per axle) for the rear axle on Golf 2, 3, Corrado Vento, etc.
- Material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
20 March 2024 17:50
Rainer W
Alles bestens
8 September 2021 07:23
Horst V
Sehr passgenau, schnelle Lieferung , Weiterempfehlen würde ich allen meinen Freunden, die auch die Spur hinten für andere einpress' tiefe der Felgen verbreitet brauchen Optimiert werden müsste die Aussage, Original Schrauben können weiterverwendet werden , beim Golf zwei braucht man Fünf mm längerer 10.9 Schrauben Gewählt hab ich euch des Namens wegen Skeptisch war ich nicht Ergebnis war genau das , was ich mir vorgestellt habe Gruß Horst
19 June 2018 20:50
Dieter R
Schnelle Lieferung und passgenau. Im Anhang Unterstützung zwecks Eintragung usw
8 July 2023 07:34
Jürgen W
Passt perfekt
19 September 2019 14:24
Thomas V
Top
5 September 2019 14:21
Thomas V
Wie IMMER TOP
25 November 2021 13:25
André L
Super Passgenauigkeit und Verarbeitung. Artikel hat ohne Anpassungsarbeiten gepasst.
8 October 2019 08:18
Herr V
Perfect fit! Good quality.
10 September 2021 16:49
Horst V
Sehr passgenau, schnelle Lieferung , Weiterempfehlen würde ich allen meinen Freunden, die auch die Spur hinten für andere einpress' tiefe der Felgen verbreitet brauchen Optimiert werden müsste die Aussage, Original Schrauben können weiterverwendet werden , beim Golf zwei braucht man Fünf mm längerer 10.9 Schrauben Gewählt hab ich euch des Namens wegen Skeptisch war ich nicht Ergebnis war genau das , was ich mir vorgestellt habe Gruß Horst
3 August 2020 15:14
Panteleimon K
Excellent quality and packaging
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/en/brake-system/adapters/1452/brake-caliper-adapter-custom-made-manufacturing
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/en/brake-system/adapters/1452/brake-caliper-adapter-custom-made-manufacturing