VW Golf Scirocco Corrado G60 VR6 16V Adapter S3 R32 Brake Caliper Caliper Adapter
- ✓ 280x22 G60 & VR6 brake discs 1H0615301A 535615301
- ✓ 1-piston 8N0615423C 8N0615424C 8N0615425B 1J0615425F
- ✓ Rear axle
€116.43*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter with tailor-made wheel hub for rear axle brake system.For fixation of brake discs diameter 280mm from G60 VR6 GTI 16V normally used on front axle in combination with standard brake calipers from Golf 4 V6/R32 or Audi S3 8L year 99.
Adapters are tailor-made for the following vehicles:
- Golf 1 (only after installation of our tailor-made pivot,that you can find in our product range)
- Golf 2 3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
Depending on the vehicle the wheel hub will be delivered with 4 or 5 fixation holes.If you also need wheel hubs, we recommend ordering the complete set directly article 344
There are 2 different installation positions for the brake caliper adapter, depending on which brake disc is installed.
Advantages:
- Significantly better perfomance than the standard brake system.
- must have when increasing performance.
- Material certificate is included
- Inexpensive procurement of spare parts
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
Technical information:
The 280 mm brake discs are centered and screwed on with our wheel hub (available in 4 and 5 holes depending on the model). The track widens by about 6-8mm per side. The wheel hubs are identical to the originals on the inside of the bearing. The original wheel bearings can therefore continue to be used.
Suitable for the front axle, we offer you brake caliper adapters for conversion to the Porsche brake system in connection with the R32 brake disc. Look in our shop.
Required components:
- Brake caliper left VW part number 8N0615423C, brake caliper right VW part number 8N0615424C, brake caliper bracket VW part number 8N0 615 425 B or painted in blue from the R32: 1J0 615 425 F.
- Brake disc:
- if 5 holes are driven: Golf 3 VR6 brake disc 280x22mm VW part number 1H0615301A pot depth 29mm
- when driving 4 holes: Golf 2 G60 brake disc 280x22mm VW part number 535615301 pot depth 40mm
Scope of delivery:
- 2 high resistant adapter-plates
- high-strength screw material
- Certificate of material
- Stress analysis / FEM calculation for entry
In this kit the whell hubs are not included. See article nr.344
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
7 May 2018 21:27
Lars K
Bin sehr zufrieden mit der Ware. Versand ging sehr schnell genau so wie das Fragen sehr schnell Beantwortet werden. Sehr kompetente Firma. Sehr Empfehlenswert alles Top.
29 October 2020 19:53
Roi E
Perfect fitment ! Great quality and awesome service. Thank you !
16 July 2021 07:39
Robert M
Alles super
24 May 2018 03:59
Steve S
The order was processed and shipped quickly arriving earlier than expected. I liked the way the product was packaged each item seperated within the box to reduce chances of damage. I would recommend epytec products to anyone who is modifying a vehicle and needing adaptors. I don't believe they could have done anymore to assist me as from viewing their website to the order arriving was less than a week. I chose epytec as I had bought a set of brake calipers that had been purchased by someone else with adaptors but had then decided to go any direction with modification, so decided to use the same company when needing adaptors for the rear of my vehicle. The end result is a perfect foment of my calipers both back and front with a professional finish. Many thanks Epytec.
18 November 2020 06:36
Christian K
Preis Leistung passt.... Service auch....
30 July 2021 06:20
Robert M
Immer wieder gerne
23 November 2018 01:59
Kevin S
Was soll man sagen,wer euch kennt weis das ihr top arbeit liefert Jederzeit kaufe ich wieder bei ihnen
17 February 2019 08:34
Jörg H
Passt perfekt
16 July 2023 14:18
Wolfgang R
Die Adapter passen sehr gut und sind qualitativ sehr hochwertig gefertigt. Wenns passen soll dann Epytec. Kann ich nur weiter empfehlen. Top Ware. Schneller Versand und erstklassiger Service. Danke nochmal.
30 October 2019 16:43
Göhring B
Das Produkt ist gut von der Verarbeitung her, Eingebaut hab ich es leider noch nicht, was mir nicht ganz so gut gefällt ist das es kein Rostschutz (durch z.b Verzinken) vorhanden ist. aber denke mal das dies das wenigste Problem ist.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 330x28 51827474 Lancia Delta brake disc
- ✓ 4-piston 996351425 / 996351426 Porsche 996 brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301A 1J0615302A Golf 4 R3 brake disc
- ✓ 6-piston 95535142150 / 95535142250 Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
- ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
- ✓ front axle
- ✓ 334x32 1J0615301AA / 1J0615302A Golf 4 R32 brake discs
- ✓ 4-piston 7L6615123T / 7L6615124T Porsche Cayenne brake caliper
- ✓ front axle
- ✓ Length: 20cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 40mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
Wheel hubs for rear axle brake system to fix brake discs typ G60 or Vr6 with diameter 280mm (normally used on front axle) in combination with standard brake calipers from S3.
Wheel hubs for rear axle brake system to fix brake discs typ G60 or Vr6 with diameter 280mm (normally used on front axle) in combination with standard brake calipers from S3.
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
- ✓ 280x22
- ✓ 65mm centering
- ✓ 29mm height
Wheel hubs for rear axle brake system to fix brake discs typ G60 or Vr6 with diameter 280mm (normally used on front axle)in combination with standard brake calipers from S3.
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake disc
- ✓ 4-piston 993351426 / 993351425 Porsche 993 brake caliper
- ✓ front axle
- ✓ Desired color can be selected
- ✓ Golf 4 R32 1-piston brake calipers
- ✓ 8N0615423C / 8N0615424C / 1J0615425
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
