VW Golf 1 Caddy 14D Scirocco brake caliper adapter Porsche 996 brake system Abarth brake brake caliper adapter
- ✓ 305x28 51778054 Abarth Punto EVO brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche 996 brake caliper
- ✓ front axle
€192.86*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for front axle brake system from Golf 1, Golf 1 Cabrio, Caddy 14d, Jetta 1, Scirocco.Allows the installation of brake discs typ Abarth diameter 305x28 mm in combination with Porsche 986 4 Piston brake calipers.
Advantages of this braking system:
- Extreme deceleration values also in connection with our rear axle brake system
- Brake discs with 4x100mm bolt circle. Therefore, the original Golf 1 bolt circle can be retained.
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems
- Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling
Required components:
- Brake discs Abarth Punto EVO 305x28 Total height 45mm Original part number: 51778054 The hub bore must be widened to 65.00mm (can be done in our house for 59 € for the pair of brake discs click here)
- Porsche brake calipers from the 996 Porsche original part no.: 996.351.425/426 (only 100% suitable with the specified Porsche calipers)
Not approved in the area of the STVO, but the material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles.
Minimum rim size:
- from 16 inch rim. Depending on the rim shape and type, the minimum size of the inner diameter can vary.
Delivery:
- 2x brake caliper adapter VW Golf 1 Caddy Scirocco on Porsche brake system
- suitable screw set high-strength
- 1x material certificate
Please have a look in our shop for a brake caliper adapter to transform your rear axle brake disc system on ventilated 280mm brake discs in combination with S3 brake calipers (click here)
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 March 2018 06:22
Luciano F
Perfekte Bearbeitung...top...
10 December 2020 19:39
Julian S
Adapter passen sehr gut👍👍
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: