Spacer PCD Adapter 5x100 5x112 5x120 5x130 to Porsche Mercedes Audi BMW Rims 20mm
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 20mm per side
- ✓ 57.1 ->57.1 centering
€158.92*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High-strength spacers / PCD adapters suitable for all Audi, VW, Seat, Skoda with 5x100 PCD and a hub centric dimension of 57,10mm at the wheel hub.
3 different PCD are on the plates:
- 5x112
- 5x120
- 5x130
Thanks to these spacers / adapters, all Audi, Mercedes, BMW and Porsche rims can be installed. The major advantage is that at each change of rims, you do not need to change the adapter /spacer. You can thus drive with Porsche rims in summer and BMW rims in winter. At each change of rims, you do not need to install a new adapter plate: Buy just once, and change several times, as good as it seems to you.
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Technical data
- enlargement per wheel: 20mm
- enlargement per axle: 40mm
- hub centric inside VW: 57,10 mm
- hub centric outisde: 57,10 mm (can also be changed as desired with centering rings)
- thread in adapter plate for wheel bolts: M14 x 1,5
The adapters /spacers are made of high-strength aluminum and thanks to the material certificate delivered with the order, it is possible to register your unit purchase even for series vehicles. All screws supplied are also high-strength( 10.9).
Delivery:
- 2x spacers / adapters for one axle
- high-strength mounting screws (fine thread M14x1,5) on wheel hub 10.9
- TÜV - certificate for registration
- Installation instructions
This offer is only for one axle. For complete equipment of your vehicle, order, please, 2 times.
The article is also available with a thickness of 20mm. This allows you to compose the kit to the required thickness.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
26 June 2020 19:34
Michael B
Perfekter artikel brauche noe wieder wechseln 👌🏻
9 May 2018 21:46
Nicolas K
Sehr gutes produkt ,top qualität ,top fahr gefühl !
28 February 2019 06:30
Uwe H
Sauber gearbeitet, schnelle Lieferung, super Preis.
12 June 2020 04:17
Michael B
Wahnsinns adapter kann ich jedem empfehlen
28 April 2023 04:16
Michael H
Die Adapter sind passgenau.Die Felgen kann ich jetzt auf einem anderen Auto benutzen. Das Gutachten ist wichtig! Damit kann ich beim TÜV alles eintragen lassen und bin damit abgesichert.
20 May 2018 13:54
Nicolas K
TOP PRODUKT, sehr passgenau , gutes Fahr verhalten
21 February 2020 08:19
Stefan M
Hat alles gepasst. Gute Ware
6 March 2020 06:44
Stefan M
Hat alles gut gepasst. Guter Service und Kommunikation mit Epytec
- Which wheel bolts do I have to use for the bolt circle adapters that I have ordered from you?
We provide screws for screwing the LK adapter onto the hubs. We don't have wheel bolts. The reason is that each rim needs different wheel bolts. So we cannot cover all types of rims. Therefore, you always have to get these yourself (see information from the rim manufacturer)
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.