Bolt circle adapter VW 4x100 on 5x112 Mercedes 20mm Wheel plates
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 66.6 centering
€136.74*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High resistant bolt circle adapter.Tailor-made for all VW with 4x100mm bolt circle and centering hole of 57,1mm.
Fits for any kind of Mercedes wheel rim with 5x112mm fixaton.
- Enlargement on each wheel : 20mm
- Enlargement of lane on axle : 40mm
- Mesure inner centering on bolt circle VW : 57,1mm
- Mesure outer centering on bolt circle Mercedes : 66,6mm
- Thread in adapter plate for wheel bolts: M12 x 1.5
All our delivered pieces are made in high quality alluminum and steel alloy and all screws supplied are high-strength (10.9).
Technical information for installation:
Fix the delivered adapter with 3 screws on the wheel hub.The eccentric has to be fixed in the 4th hole and then adjusted in the right position to adapt it on bolt circle. To finish fix the wheel rim with the 5 screws.This will give stability to the whole installation.
In the installation instructions, you see how the whole thing is mounted. (click here)
With the TÜV certificate (technical report) included in the scope of delivery, an entry can be made for individual acceptance of series vehicles.
Scope of delivery:
- 2x high resistant adapter for bolt circle conversion on one axle
- 2x high resistant eccentric
- 1x complet high resistant screw kit 10.9
- TÜV - certificate for registration
- Installation instructions
All our delivered pieces are made in high quality alluminum and steel alloy.You will receive bolt circle adapters for one axle. If you want your vehicle to be fully equipped, please buy the item twice. Please find in our shop the same product with thickness 25mm.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
25 June 2019 14:50
Claudia R
Verarbeitung top. Habe sie vor 3 Tagen montiert. Gibt nund alles perfekt.
4 October 2020 21:33
Georges N
Top ware kann ich nur weiterempfehlen
16 March 2020 08:26
Dennie O
Hervorragende Qualität , super passgenau und vor allem mit §21 eintragbar .
28 January 2021 12:43
Dirk C
Mir gefällt das Produkt. Die Passform ist genau, nur die Gewinde könnten mit Stahlbuchse sein. Ok, ist bei dem engen Abstand vielleicht nicht umzusetzen.
20 September 2020 08:56
Georges N
Top ware kann ich nur weiterempfehlen Mit freundlichen Grüßen Georges
10 January 2021 16:03
R. S
Adapter gebraucht fur anhanger bis 750kg | 4x100 zu 5x112 (4,5Jx13" ET30 -> 6Jx12" ET-4 ) Gut verarbeitet, passt gut.
14 August 2018 10:34
Johann Müller D
Super schneller Versand, Produkt passt zu 100%. Klare weiterempfehlung, immer wieder gerne....
29 August 2018 15:11
Antje S
Lochkreisadapter wurde noch nicht genutzt, daher kann ich nur Kontakt und Lieferung bewerten: perfekter fachbezogener, freundlicher Kontakt. Schnelle Lieferung.
17 January 2022 16:19
Christian D
Top Ware
2 January 2019 19:49
Danny W
Für meine Zwecke leider im Außendurchmesser zu klein. Muß eine Sonderanfertigung beauftragen. Sonst TOP Qualität u Service
- Which wheel bolts do I have to use for the bolt circle adapters that I have ordered from you?
We provide screws for screwing the LK adapter onto the hubs. We don't have wheel bolts. The reason is that each rim needs different wheel bolts. So we cannot cover all types of rims. Therefore, you always have to get these yourself (see information from the rim manufacturer)
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 1-3 / Seat Ibiza / VW Jetta
- ✓ Narrow axle
- ✓ VR6,16V,1.8T engine
- ✓ 2M, 02Q, DQ250 gearbox
- ✓ Mounting behind the axle journal
- ✓ thickness: 5mm
- ✓ centering 65mm
- ✓ fall positive/negative
- ✓ 3mm thickness
- ✓ Suitable for VW: Corrado, Golf 2 +3, Jetta Passat 35i, Scirrocco, Vento, Polo 86c/6n/9n, Seat: Cordoba, Ibiza, Toledo
- ✓ 4x100 to 5x112
- ✓ 25mm per side
- ✓ 57.1 -> 66.6 centering
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ drive shaft kit for all Golf MK2 Jetta 2 Seat Toledo 1 (narrow axlw), stable up to 800 HP.
- ✓ narrow axle
- ✓ VW Golf 2, VW Golf 3, Jetta 2, Seat Toledo
- ✓ DQ250 / DSG all-wheel drive transmission, 02M, 02Q
- ✓ all-wheel drive rear axle
- ✓ VW Golf 2, VW Golf 3, Passat, Corrado
- ✓ 02M, 02Q gearbox
- ✓ VR6 plus axle
- ✓ VW Golf 2, VW Golf 3, Passat, Corrado
- ✓ 02M, 02Q, DQ250 / DSG four-wheel drive transmission
- ✓ VR6 plus axle
- ✓ VW Golf 3 VR6, Golf 3 GTI, Passat VR6, Corrado VR6
- ✓ 02M, 02Q, DQ250 / DSG 6 speed gearbox
- ✓ narrow axle
- ✓ VW Golf 1, Golf 1 Cabrio, Scirocco, Caddy 14 D, Jetta 1
- ✓ DQ250 / DSG all-wheel drive transmission, 02M, 02Q 6-speed transmission
- ✓ VR6 plus axle
- ✓ VW Golf 2, VW Golf 3, Passat, Corrado
- ✓ 02M, 02Q, 6-speed gearbox
- ✓ narrow axis
- ✓ VW Golf 2, VW Golf 3, Jetta 2, Seat Toledo
- ✓ R32 or 2.8l V6 4 Motion 02M 02Q 6-speed
- ✓ narrow axis
- ✓ VW Golf 2, Jetta 2, Seat Toledo 1
- ✓ VR6, 16V, 1.8T and 02M 6-speed gearbox FWD
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing
- ✓ Golf 1 Scirrocco & Jetta
- ✓ long service life
- ✓ 12 pieces
- ✓ Golf 1 Scirrocco & Jetta
- ✓ long service life
- ✓ 12 pieces
- ✓ Narrow axle
- ✓ Golf 2, Golf 3, Jetta 2, Seat Toledo
- ✓ 02M/02Q/ DQ250/DSG all-wheel drive transmission external joint VR6 fine teeth/G60 coarse teeth
- ✓ Narrow Axis
- ✓ Golf 1, Golf 1 Cabrio, Scirocco, Caddy 14D, Jetta 1 Golf 4 external joint
- ✓ 02M 02Q DQ250 / DSG 6-speed + all-wheel drive transmission
- ✓ VR6 plus axle front
- ✓ VW Golf 2, Golf 3, Passat, Corrado
- ✓ 02M/02Q 6-speed gearbox
- ✓ VR6 plus axle at the front
- ✓ Golf 2, Golf 3, Passat, Corrado
- ✓ 02M/02Q/ DQ250/DSG all-wheel drive transmission