VW Golf 1 2 3 G60 16V VR6 Wheel Hub Conversion 5x112 Corrado Rear Axle.
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 1-3 / Seat Ibiza / VW Jetta
€157.00*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Wheel hub for PCD conversion to 5x112, rear axle In this wheel hub there are 2 bolt circles, once the 5x100 and additionally the 5x112 bolt circle. This has the advantage that the bolt circle can be used for both 5x112 rims and 5x100 rims without having to change the components.
Suitable for the following VW and Seat models:
- Golf MK1 (only with our axle pivot pin, Epytec, in our online shop)
- Golf MK2 MK3 + GTI+ VR6
- Corrado
- Jetta
- Passat 35i
- Scirrocco
- Vento
- Polo 6N1
- Seat Cordoba
- Seat Ibiza
- Seat Toledo
This hub is perfect for rear brake system conversion to larger discs, and the original wheel bearing can be used.
Advantages:
- no track enlargement. No modifications at the wheel arch/housing.
- Two bolt circles 5x100 and 5x112 so both can be used on the car.
- 100% fit. Based on original parts.
- the 5x112mm wheel hubs are equipped with M14x1.5 thread. Thus, the Audi and VW rims can be mounted with the original wheel bolts
- it is possible to register your purchase even for series vehicles by TÜV (German Technical Inspection Agency). But not permitted by STVO (German Road Licensing Law)
- The ABS can still be used as original.
The original brake discs / wheel hubs are used as a basis, which have been subsequently extended to a PCD by a special method.
Delivery:
- 2x wheel hubs for conversion to 5x112 PCD with M14x1.5 thread
Technical data:
Login
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 66.6 centering
- ✓ 4x100 to 5x112
- ✓ 25mm per side
- ✓ 57.1 -> 66.6 centering
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 20mm per side
- ✓ 57.1 ->57.1 centering
- ✓ 5x100 to 5x112 / 5x120 / 5x130
- ✓ 25mm per side
- ✓ 57.1 ->57.1 centering
- ✓ 310x22 3D0615601D VW Phaeton brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle