Drive Shaft Golf MK2 1.8T 16V VR6 Turbo Drive Shafts 02m 6-speed FWD without joints
- ✓ narrow axis
- ✓ VW Golf 2, Jetta 2, Seat Toledo 1
- ✓ VR6, 16V, 1.8T and 02M 6-speed gearbox FWD
€332.00*
- TÜV registration free
- 15 years expert knowledge
- shipping within 24h
- 2 years warranty
Drive shaft set for all VW Golf MK2, Jetta 2 and Seat Toledo 1 with a small axle. Absolutely necessary if you want to convert your vehicle to VR6, 16V or 1,8T engine, combined with the 6-speed 02M gearbox (only for Front wheel drive FWD).
We also have suitable engine and gearbox mounting brackets, as well as suitable adapters to convert the 02M 6-speed gearbox to the front-wheel drive. Just have a look in our shop or below in the accessories.
The internal joint from 108mm Golf MK4 is required and the external joint from the G60.
It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).
With the installation of our drive shaft, you avoid many modifications and you save time.
Advantages of the drive shaft:
- stable up to 800 HP
- fits plug & play
- solid shaft made of special high-strength material
- easy assembly
- suitable for manual gier
Delivery:
- 1x drive shaft kit for Golf MK2 Jetta 2 Seat Toledo 1 narrow axle), stable up to 800HP
Our drive shafts are free of registration and therefore do not have to be registered.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
18 May 2023 01:57
Benjamin M
Sehr gute Qualität
- What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
- Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
- Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
- Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.
- ✓ gearbox holder
- ✓ Golf 2, Golf 3, Passat, Corrado, Jetta, Vento
- ✓ 02m / R32 V6 1.8T 6-speed gearbox DRP DQB DXW
- ✓ excellent fit
- ✓ front axle Golf 2 3 Corrado
- ✓ high stability
- ✓ VW Golf 2 3 Passat Jetta Corrado
- ✓ Better directional stability
- ✓ Easy installation
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 66.6 centering
- ✓ Best engine lubrication
- ✓ Registration free
- ✓ Engine code: PG, RP, ABF, ABS...
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02M 6-speed transmission Golf 4 R32
- ✓ 1.8 T simple engine and transmission conversion
- ✓ 28 teeth inside
- ✓ length: 32mm
- ✓ best quality