Bolt circle adapter VW 4x100 on 5x112 Mercedes 25mm Wheel plates
- ✓ 4x100 to 5x112
- ✓ 25mm per side
- ✓ 57.1 -> 66.6 centering
€119.91*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High resistant bolt circle adapter.Tailor-made for all VW/ Opel with 4x100mm bolt circle and centering hole of 57,1mm.
Fits for any kind of Mercedes wheel rim with 5x112mm fixaton.
- Enlargement on each wheel : 25mm
- Enlargement of lane on axle : 50mm
- Mesure inner centering on bolt circleOpel/ VW : 57,10mm
- Mesure outer centering on bolt circle Mercedes : 66,6mm
- Thread in adapter plate for wheel bolts: M12 x 1.5
Technical information for installation:
Fix the delivered adapter with 3 screws on the wheel hub.The eccentric has to be fixed in the 4th hole and then adjusted in the right position to adapt it on bolt circle. To finish fix the wheel rim with the 5 screws.This will give stability to the whole installation.
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Scope of delivery:
- 2x high resistant adapter for bolt circle conversion on one axle
- 2x high resistant eccentric
- 1x complet high resistant screw kit 10.9
- TÜV - certificate for registration
- Installation instructions
You will receive bolt circle adapters for one axle when your vehicle is fully equipped, please buy the item 2x. Please find in our shop the same product with thickness 20mm.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
28 January 2021 12:43
Dirk C
Mir gefällt das Produkt. Die Passform ist genau, nur die Gewinde könnten mit Stahlbuchse sein. Ok, ist bei dem engen Abstand vielleicht nicht umzusetzen.
23 March 2023 08:39
Andre R
Hat alles super gepasst. Top Qualität. Da man ja Epytec aus der Szene kennt hatte ich auch keine Bedenken. Auch der Kundenservice, wenn man eine Frage hat, ist sehr gut. Also gerne wieder. 👌
- Which wheel bolts do I have to use for the bolt circle adapters that I have ordered from you?
We provide screws for screwing the LK adapter onto the hubs. We don't have wheel bolts. The reason is that each rim needs different wheel bolts. So we cannot cover all types of rims. Therefore, you always have to get these yourself (see information from the rim manufacturer)
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.