Wheel Hubs Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT Conversion to 5x112 VR6 R32 PCD Adapter Rear
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 4 Bora / Audi A3 / Audi TT quattro
€168.03*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x112 PCD , rear axle on front WD models like Golf MK4 series.
Who wants to finally convert his Golf MK4, Bora, Audi A3 TT TTRS RS3 , Audi TT, etc, to 5x112mm PCD, is here just right!
This is the perfect solution as the original hub can not be re-drilled because the diameter is too small. Thus, you finally can drive with rims having 5x112 PCD, without adapter plates are needed.
Due to the 5x112 PCD, the wheel hub is approx. 1.5 cm larger in diameter. Thus, the original brake disc can not be used. For this we have many caliper adapters with which you can find a solution fpr this point.
The wheel hubs can also be used on the VW Polo GTI in combination with our adapter ring article 903 (click here for the matching article).
Advantages:
- rims with 5x112 without spacer plates
- 100% fitting
- completely galvanized, therefore best corrosion protection
- the 5x112mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used
- is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles
- ABS mounting rings are supplied
Delivery:
- 2x wheel hubs with 5 x 112 and M14x1,5 thread, for rear axle of Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
21 May 2019 21:22
Ivan G
Quality of the product. Inner diameter of brake disc is smaller than od diameter of product. I did not install product yet, i am planning soon.
4 September 2021 15:16
Dominik V
Top-Qualität. Einfacher und sauberer kann ein Umbau des Lochkreises nicht erfolgen.
1 April 2023 17:06
Kevin S
Top! Teile sind super wie Original.
2 June 2023 23:50
Saša K
Alles passt perfekt. Meine empfehlung.
11 September 2021 12:50
Bruno C
Très bonne qualité
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems