VW Golf 4 VW Polo 6r WRC Audi A3 TT R32 S3 Caliper Brake Adapter Brake Caliper Mounting Bracket
- ✓ 256x22 8L0615601 VW / Audi brake disc
- ✓ 1-piston 8N0615423C / 8N0615424C R32 / S3 brake caliper
- ✓ rear axle
€34.52*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake Conversion kit with brake caliper adapters / brackets to allow fitment of the large rear brake system (256x22) from Golf 4 V6 4Motion R32, VW Polo 6r WRC, Audi TT, S3 on all vehicles with front drive of the series Golf 4 Golf 4 TT A3.
The adapters are made of high-strength steel and are supplied galvanized
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificat
- the brake calipers from the 4Motion models can be fitted with our brackets. Thus, you avoid the purchase of Jubi caliper supports costing around 120 €, and which are difficult to find.
Required components:
- original VW/Audi brake caliper 4motion
- original large 4motion VW/Audi disc brakes 256x22
Delivery:
- 2x brake caliper adapters
- High strength mouting screws
- material certificat
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 August 2018 11:48
Guy G
Hat wie immer super geklapt 👍🏻👍🏻 Und passen tuts auch ;)
31 August 2019 15:29
David S
Perfekt gepasst. Sauber gefertigt. Preislich auch Top.
4 February 2022 11:21
Marius M
Die Adapter sind wie auch immer in bester Qualität zugestellt das auch mit Gutachten für TÜV Eintragung
21 March 2024 06:37
Mathieu A
Parfait pour ma Leon 1m avec frein arrière de Audi tt Quattro
21 May 2020 01:09
Diogo D
The missing link for my set! 💪
20 October 2018 08:15
Thomas B
Ausgezeichnete Qualität, gerne wieder.
24 May 2020 14:37
Udvary / M
Einfach super!! Passt genau.
31 March 2022 13:33
Dragos D
Top Qualitätsprodukt!
19 December 2018 23:38
Sascha H
Gute Passgenauigkeit
12 April 2021 08:22
Christos Z
.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: